Biblio Discovery — Demo Discovery Service

21 hasil untuk "Abdulkader Ismail Al-Hadithi"

Menampilkan 1–20 · 2,32 detik · RSS

  1. Artikel Jurnal

    INFLUNCE OF INCREASING WATER:CEMENT RATIO ON THE SOME PROPERTIES OF CONCRETE CONTAINS LOW CONTENT OF POLYMER

    Abdulkader Ismail Al-Hadithi

    Iraqi Journal of Civil Engineering, Vol. 3 No. 6 · 2005 · Inggris · DOAJ

    This research includes the variation effect of water:cement ratio (W/C) on properties such as compressive strength, flxural strength, density and workability of concrete containing a low Polymer SBR ratio. 1:2:4 cement:sand:gravel mixes by weight were used. The polymer was added as a percentage of…

  2. Artikel Jurnal

    Some Properties of Cement Mortar Modified by Styrene Butadiene Rubber

    Zainab Essam Mohammed; Abdulkader Ismail Al-Hadithi

    Journal of Engineering, Vol. 29 No. 09 · 2023 · Inggris · DOAJ Scopus

    This research studies the effect of adding five different percentages of polymer (2, 4, 6, 8, and 10% of cement weight) on cement mortar's fresh and hardened properties, which was cured at laboratory temperature for 7, 14, and 28 days. Workability increases with increasing polymer. The workability…

  3. Artikel Jurnal

    Structural Behavior of SCC Hollow Beam Reinforced with GFRP Containing EPS and Plastic Fiber

    Mohanad T. Abduljaleel; Abdulkader Ismail Al-Hadithi

    Iraqi Journal of Civil Engineering, Vol. 19 No. 1 · 2025 · Inggris · DOAJ

    The purpose of this research is to produce a modified SCC that involves the incorporation of expanded polystyrene (EPS) and waste of plastic type (PET). The goal is to minimize the weight of the material while simultaneously improving its brittleness and reducing the environmental impact. The study…

  4. Artikel Jurnal

    Effect of Waste Plastic Fibers on Mechanical Properties of Concrete and Shear Strength of Reinforced Concrete Beams

    Abdulkader Ismail Al-Hadithi; Mustafa Ahmed Abbas

    Iraqi Journal of Civil Engineering, Vol. 12 No. 1 · 2018 · Inggris · DOAJ

    This study applies sustainability concepts by cutting PET plastic bottles into small fibers added to ordinary concrete to improve shear and tensile strength of reinforced concrete beams. Seven reinforced concrete beams were tested in shear with different PET fiber percentages. The influence of PET…

  5. Artikel Jurnal

    Mechanical Properties of High Performance Concrete Containing Waste Plastic as Aggregate

    Abdulkader Ismail Al-Hadithi; Mahmood Fawzi Ahmed Alani

    Journal of Engineering, Vol. 21 No. 8 · 2015 · Inggris · DOAJ Scopus

    The world's population growth and the increasing demand for new infrastructure facilities and buildings , present us with the vision of a higher resources consumption, specially in the form of more durable concrete such as High Performance Concrete (HPC) . Moreover , the growth of the world…

  6. Artikel Jurnal

    Flexural Behaviour of Polymer Modified Reinforced Concrete Beams

    Bayan S. Al-Nu'man; Abdulkader Ismail Al-Hadithi

    Journal of Engineering and Sustainable Development, Vol. 13 No. 1 · 2009 · Inggris · DOAJ Scopus

    This research include the study of Structural Behaviour of Polymer Modified Reinforced Concrete Beams with Styrene Butadiene Rubber (SBR) polymer. Two series of concrete mixtures were used; the first was with moderate compressive strength (level I) and the other with compressive strength higher…

  7. Artikel Jurnal Teks lengkap

    Behavior of Polymer Modified Concrete Slabs under Impact

    Bayan S. Al-Numan; Abdulkader Ismail Al-Hadithi

    Iraqi Journal of Civil Engineering, Vol. 5 No. 11 · 2008 · Inggris · DOAJ

    This research includes the study of improving impact resistance of concrete using styrene butadiene rubber (SBR) with different weight ratios of polymer to cement 3%, 5% and 10%. Two series of polymer modified concrete (PMC) were produced the first level I with moderate compressive strength and the…

  8. Artikel Jurnal

    Compressive and Impact Loads' Effects on The Behavior of SIFCON Made of Plastic Waste Fibers

    Anas Khudhair Yass Al-Hadithi; Abdulkader Ismail Al-Hadithi

    Iraqi Journal of Civil Engineering, Vol. 16 No. 2 · 2022 · Inggris · DOAJ

    SIFCON is a relatively new material and consists of slurry (cement or cement and sand), water, superplasticizers (water reducers), and fibers. In all previous research, steel fibers and other types of fibers were used, but in this study, waste plastic fibers Polyethylene Terephthalate (PET)…

  9. Artikel Jurnal

    The effect of waste polyethylene terephthalate fibers on the properties of self-compacting concrete using Iraqi local materials

    Zena Ahmed Mahmoud; Abdulkader Ismail Al-Hadithi; Muhannad Aldosary

    Iraqi Journal of Civil Engineering, Vol. 17 No. 2 · 2023 · Inggris · DOAJ

    This study was conducted to examine the impact of plastic fibers (WPFs) in an effort to improve some of the features of self-compacting concrete (SCC) using Iraqi raw materials. Waste polyethylene terephthalate fibers (waste PET fibers) from used beverage bottles were added. Some tests were carried…

  10. Artikel Jurnal

    Viability of cellulose nanofibre powder and silica fume in self-compacting concrete rheology, hardened properties, and microstructure

    Nahla N. Hilal; Yusra M. Alobaidi; Abdulkader Ismail Al-Hadithi

    Journal of King Saud University: Engineering Sciences, Vol. 36 No. 3 · 2024 · Inggris · DOAJ Scopus

    This research investigated the influence of adding cellulose nanofiber (CNF) on the rheology and hardened properties of self-compacting concrete (SCC). The CNFs were produced from wastepaper through chemical treatment and added as 0.25%, 0.50%, 1%, 2%, and 3% by weight of cement in SCC. The results…

  11. Artikel Jurnal

    Structural Behavior of Reinforced Shotcrete Slabs Incorporating Plastic Fibers

    Abdulfatah A. Jawhar; Yousif A. Mansoor; Abdulkader Ismail Al-Hadithi

    Tikrit Journal of Engineering Sciences, Vol. 32 No. 4 · 2025 · Inggris · DOAJ Dikeluarkan Scopus 2025

    Shotcrete technology is developed to be used in places difficult to reach by traditional methods. The technique was developed to apply to strengthening work, slope stabilization, tunnel lining, and constructed structural members. These applications necessitate the use of a shotcrete mixture to…

  12. Artikel Jurnal

    Preparation and Characterization of Nano-waste glass powder

    Sief Aldeen Odaa; Abdulkader Ismail Al-Hadithi; Yousif A. Mansoor

    Results in Materials, Vol. 20 · 2023 · Inggris · DOAJ Scopus

    This experimental study investigates top-down grinding to turn used waste glass into nano-glass powder. The study explores a new instrument locally manufactured to synthesize nano-glass powder. The high-energy ball mill was manufactured based on design, material, assembly, testing, optimization…

  13. Artikel Jurnal

    Structural Performance of Ferrocement Beams containing Plastic Waste Fibers and Longitudinal Holes Filled with Lightweight Concrete

    Abdulrahman Jamal Alobeadi; Abdulkader Ismail Al-Hadithi; Muhannad Haqqi Aldosary

    Iraqi Journal of Civil Engineering, Vol. 19 No. 1 · 2025 · Inggris · DOAJ

    Ferrocement is a type of concrete made of mortar with different wire meshes. It has wide and varied applications in addition to its strength and durability. This research aims to combine ferrocement and sustainability, as over time, the consumption of plastics, especially plastic bottles, has…

  14. Artikel Jurnal

    Investigate the Fresh and Hardened Properties of Shotcrete Concrete Contains Different Types of Plastic Fibers

    Abdulfatah Abdulwahid Jawhar; Abdulkader Ismail Al-Hadithi; Yousif A. Mansoor

    Iraqi Journal of Civil Engineering, Vol. 16 No. 2 · 2022 · Inggris · DOAJ

    Adding fibers to the shotcrete concrete mixes is very important to increase the load-carrying capacity and toughness, but it also reduces crack propagation by bridging the cracks. On the other hand, this fiber has an effect on the fresh and hardened properties of shotcrete. In this study, fresh…

  15. Artikel Jurnal

    Analysis of Flexural Behavior of One-way Reinforced Concrete Slab Casted by Shotcrete Contain Various Types of Plastic Fibers

    Abdulfatah Abdulwahid Jawhar; Yousif A. Mansoor; Abdulkader Ismail Al-Hadithi

    Iraqi Journal of Civil Engineering, Vol. 16 No. 2 · 2022 · Inggris · DOAJ

    The design of reinforced concrete structures has traditionally relied on empirical techniques based on experience or experimental research on actual structural members. Although this approach produces a high level of precision, it is usually exceedingly costly and time-consuming. This paper studied…

  16. Artikel Jurnal

    Flexural Behavior of Slurry Infiltrated Waste Plastic Fiber Concrete

    Dheyaa Hassan Ali; Abdulkader Ismail Al-Hadithi; Ahmed Hilal Farhan

    Iraqi Journal of Civil Engineering, Vol. 17 No. 1 · 2023 · Inggris · DOAJ

    Fiber Reinforced Concrete (SIFCON) is a new material with high performance and is a special type of Fiber Reinforced Concrete (FRC). The matrix of this type of concrete consists of a mortar that has the ability to penetrate a network of fibers. It is composed of mortar, water, a plasticizer (water…

  17. Artikel Jurnal

    Mechanical Properties of High Performance Concrete Containing Waste Plastic as Aggregate

    Abdulkader Ismail Al-Hadithi, Ass. Prof. Dr.; Mahmood Fawzi Ahmed Alani

    Journal of Engineering, Vol. 21 No. 8 · 2015 · Inggris · DOAJ Scopus

    The world's population growth and the increasing demand for new infrastructure facilities and buildings , present us with the vision of a higher resources consumption, specially in the form of more durable concrete such as High Performance Concrete (HPC) . Moreover , the growth of the world…

  18. Artikel Jurnal

    Behaviour of Waste Plastic Fiber Concrete Slabs Under Low Velocity Impact

    Abdulkader Ismail Al-Hadithi; Ahmed Tareq Al-Ejbari; Ghassan S. Jameel

    Iraqi Journal of Civil Engineering, Vol. 9 No. 1 · 2013 · Inggris · DOAJ

    This research investigated low-velocity impact resistance of concrete slabs containing waste plastic fibers from soft drink bottles at 0.5%, 1% and 1.5%. Results showed improved mechanical properties and the 1.5% plastic fiber mix achieved the highest impact resistance at failure.

  19. Artikel Jurnal

    Stress-Strain Relationship of Steel-Fiber Reinforced Polymer Modified Concrete under Compression

    Abdulkader Ismail Al-Hadithi; Ameer Abdulrahman Al-Dulaimy; Saeed Khalaf Rejib

    Iraqi Journal of Civil Engineering, Vol. 10 No. 1 · 2016 · Inggris · DOAJ

    This experimental study investigated the stress-strain relationship of steel-fiber reinforced polymer modified concrete under compression. Four mixes were used: normal concrete, polymer modified concrete with 10% polymer by cement weight, and two steel-fiber polymer modified concrete mixes with 1%…

  20. Artikel Jurnal Teks lengkap

    UTILIZING WASTE PLASTIC POLYPROPYLENE AND POLYETHYLENE TEREPHTHALATE AS ALTERNATIVE AGGREGATES TO PRODUCE LIGHTWEIGHT CONCRETE: A REVIEW

    IBRAHIM H. ALFAHDAWI; S. A. OSMAN; R. HAMID dkk.

    Journal of Engineering Science and Technology, Vol. 11 No. 8 · 2016 · Inggris · DOAJ Dikeluarkan Scopus 2026

    In recent times, there is an increasing need for the fabrication of mortar and concrete that can be characterised as sustainable and environmentally friendly. Ideally, this concrete should be inexpensive, lightweight, and outstanding in terms of its physical and mechanical specifications. Plastic…