14 hasil untuk "Pongjet Promvonge"
Menampilkan 1–14 · 0,41 detik · RSS
-
Artikel Jurnal
Heat transfer in a tube with combined V-winglet and twin counter-twisted tape
The article aims to study experimentally the enhanced thermal-hydraulic performance in a constant heat-fluxed tube inserted with V-winglet-attached twin counter-twisted tapes. Air was utilized as the test fluid and flowed into the tube in a turbulent flow region, Reynolds number in a range of 5300…
-
Artikel Jurnal
Numerical heat transfer in a solar air heater duct with punched delta-winglet vortex generators
The flow topology and thermohydraulic performance of a novel designed punched delta-winglet (P-DW) placed on the absorber of a solar air heater duct are numerically explored. The effects of geometrical parameters, namely, the relative winglet pitch, PR = 1–2 and the relative punched hole size, dR =…
-
Artikel Jurnal
Heat transfer enhancement in tubular heat exchanger with double V-ribbed twisted-tapes
An experimental work on heat transfer enhancement in a round tube by insertion of double twisted tapes in common with 30° V-shaped ribs has been conducted. Air as the test fluid flowed through the test tube having a constant wall heat-flux with Reynolds number (Re) from 5300 to 24,000. The combined…
-
Artikel Jurnal
Thermal-hydraulic performance of solar receiver duct with inclined punched-ribs and grooves
The article presents an experimental study on turbulent airflow friction and thermal behaviors in a solar receiver heat exchanger duct mounted with combined inclined chamfered-groove and turbulators. The experimental work was conducted for Reynolds numbers from 5,300 to 24,000, based on the…
-
Artikel Jurnal
Rice husk combustion characteristics in a rectangular fluidized-bed combustor with triple pairs of chevron-shaped discrete ribbed walls
An experimental combustion work using the rice husk as a fuel was performed in a rectangular fluidized bed combustor with triple pairs of chevron-shaped discrete ribbed walls. The effect of percent excess air (EA = 40%–70%) on temperature distribution and gas emissions in a rectangular…
-
Artikel Jurnal
Effect of louvered curved-baffles on thermohydraulic performance in heat exchanger tube
The paper presents an experimental study of convection enhancement in a tube heat exchanger using louvered curved-baffle (LCB) vortex generator (VG). The heat transfer and pressure loss of air as a working fluid, flowing in an isothermal-fluxed tube were measured having Reynolds numbers (Re)…
-
Artikel Jurnal
Enhanced thermal performance in solar receiver duct with louver-punched V-type winglets: Numerical and experimental study
An experimental and computational research was performed to explore the augmentation of turbulent convection in a solar receiver channel by utilizing louver-punched V-type winglets (LPVWs) that were fixed to the absorber plate. The simulation utilized the realizable k-ε turbulent model, and the…
-
Artikel Jurnal
Investigation of Combustion Characteristics in a Vortexing Fluidized-bed Combustor with a Contraction Chamber
This investigation was undertaken to obtain information on the effects of a contraction chamber and secondary air ratio (() on combustion temperature distribution, gas emissions of rice husk combustion and flow behaviours in a vortexing fluidized-bed combustor with a contracted chamber (VFBCC).The…
-
Artikel Jurnal
Analysis of exergy and heat transfer in a tube fitted with flapped V-baffles
Vortex generator is a device that shows promise in generating streamwise vortices that can be utilized for boosting the rate of heat transmission inside a cooling/heating system with a relatively smaller penalty in terms of friction loss. The primary goal of the current research is to maximize the…
-
Artikel Jurnal
Heat transfer analysis in a tube contained with louver-punched triangular baffles
The present research assesses the thermal effectiveness of a heat exchange tube incorporating louver-punched triangular baffle (LPTB) vortex generators under turbulent conditions. For Reynolds numbers between 4760 and 29,270, the heat transfer and flow behaviors in the consistent heat-fluxed tube…
-
Artikel Jurnal
Heat transfer distribution and flow characteristics in a channel with perforated-baffles
The current paper reports the prediction of heat transfer performance of a channel with a modified perforated-baffle in a square wings (SW-PB) form. Numerical results include flow/temperature field, local heat transfer distribution, and thermal performance of a channel installed with the transverse…
-
Artikel Jurnal
Temperature Distribution and Combustion Characteristics of Rice Husks in a Fluidized Bed Combustor
This article presents an experimental study on the combustion characteristics of rice husks in a fluidized bed combustor (FBC). In the experiments, the FBC was tested with rice husk feeding rates ranging from 10 15.5 kg/hr to yield percent excess air (EA) between 25% and 35%. The axial and radial…
-
Artikel Jurnal
Turbulent flow and heat transfer behaviors in a circular tube fitted with multiple V–baffles
This article presents turbulent flow patterns and thermal behaviors in a circular tube mounted with 30° multiple V–baffles. The influences of V–baffle numbers (N) of 2, 3 and 4 with pitch ratios (PR) of 1.0, 1.5 and 2.0 for Reynolds number (Re) between 3000 and 20,000 were investigated numerically…
-
Artikel Jurnal
Effect of arc-shaped twisted-baffles on augmented heat transfer in a rectangular duct
In this current work, the effect of utilizing arc-shaped twisted-baffles (T-ABs) in a rectangular air channel on thermal performance factor (TPF) has been experimentally studied. In these experiments, the influence of the changes in parameters such as dimensions of pitch ratio (p/w), attached…