5 hasil untuk "Skowronek, Adam"
Menampilkan 1–5 · 0,46 detik · RSS
-
Artikel Jurnal Teks lengkap
Effect of Deformation Temperature on the Mechanical Behavior and Stability of Retained Austenite in TRIP-Assisted Medium-C Multiphase Steel
The temperature-dependent microstructural evolution and corresponding mechanical stability of retained austenite in medium-C TRIP-assisted 0.43C-1.45Mn-0.98Si-1Al-0.033Nb-0.01Ti steel obtained by thermomechanical processing was investigated using static tensile tests and microstructural studies…
-
Artikel Jurnal Teks lengkap
Dependence of mechanical properties on the phase composition of intercritically annealed medium-Mn steel as the main competitor of high-strength DP steels
Depending on the alloy composition, intercritical annealing may provide different phases in the microstructure. For low-alloyed dual-phase (DP) steels it is usually ferrite and martensite, while for medium-Mn steels retained austenite is also formed. In a present study, a wide intercritical…
-
Artikel Jurnal Teks lengkap
Effect of Hot Deformation on Phase Transformation Kinetics in Isothermally Annealed 3Mn-1.6Al Steel
The kinetics of ferritic transformation and the corresponding microstructural evolution in 0.17C-3.1Mn-1.6Al-0.04Nb-0.22Mo-0.22Si medium-Mn steel during isothermal annealing was investigated in dilatometric studies. The material was subjected to thermal and thermo-mechanical treatments aimed at…
-
Artikel Jurnal Teks lengkap
Dilatometric Analysis of the Austenite Decomposition in Undeformed and Deformed Low-Carbon Structural Steel
This paper aims to analyze the effect of deformation on the phase transformation kinetics of low-carbon structural steel. The steel used for the investigation was subjected to two different dilatometric analyses using a DIL 805A/D device. The first analysis was to determine the phase transformation…
-
Artikel Jurnal Teks lengkap
Design concept and phase transformation study of advanced bainitic-austenitic medium-Mn steel
The isothermal heat treatment processing routes are designed for a novel 0.17 C-3.1Mn-1Si-0.55Al-0.22Mo-0.034Ti-0.073 V steel, aiming to obtain a homogeneous fine lath-type microstructure consisting of bainitic ferrite and retained austenite (RA). The phase transformation of the investigated steel…