19 hasil untuk "Ziad Azar"
Menampilkan 1–19 · 0,79 detik · RSS
-
Artikel Jurnal
Comparison of Electrically Excited Synchronous Machines Using Copper and Aluminum Windings in Stator and Rotor
In this paper, electrically excited synchronous machines (EESMs) using copper (Cu) and aluminum (AI) windings are compared for the feasibility of replacing Cu windings with Al windings in electric vehicle (EV) applications since Al windings have lower mass density and cost per weight, but higher…
-
Artikel Jurnal
Comparative Study of PMSG, EESG, and HESG for Wind Power Application of Different Power Levels
In this paper, permanent magnet synchronous generators, electrically excited synchronous generators, and hybrid excited synchronous generators are compared to evaluate the difference in performance and cost efficiency for 3 kW medium-speed-low-torque and 3 MW low-speed-high-torque wind turbines…
-
Artikel Jurnal Teks lengkap
Cooling Techniques in Direct-Drive Generators for Wind Power Application
Direct-drive generators are an attractive candidate for wind power application since they do not need a gearbox, thus increasing operational reliability and reducing power losses. However, this is achieved at the cost of an increased generator size, larger inverter and decreased thermal…
-
Artikel Jurnal
Effect of tooth tips on the electromagnetic performance of PM fractional-slot modular machines using grain-oriented electrical steel
The effect of tooth tips on the performance variations due to using grain-oriented electrical steel (GOES) stator laminations in permanent magnet fractional-slot modular machines is studied in this work. It is concluded that the electromagnetic performance is further improved using GOES in machines…
-
Artikel Jurnal
Utilisation of grain-oriented electrical steel in permanent magnet fractional-slot modular machines
The performance improvement of using grain-oriented electrical steels (GOES) in the stator of PM fractional-slot modular machines is analysed in this study. Several models using a finite element tool are examined and it is concluded the techniques used in the actual software are not accurate for…
-
Artikel Jurnal Teks lengkap
Fault Detection of Permanent Magnet Synchronous Machines: An Overview
These days, as the application of permanent magnet synchronous machines (PMSMs) and drive systems becomes popular, the reliability issue of PMSMs gains more and more attention. To improve the reliability of PMSMs, fault detection is one of the practical techniques that enables the early…
-
Artikel Jurnal Teks lengkap
Modelling and Analysis of Inter-Turn Short-Circuit Faults for Large-Power SPM Wind Generators
This paper proposes a general analytical model for large-power surface-mounted permanent magnet (SPM) wind generators under inter-turn short-circuit (ITSC) faults. In the model, branch currents rather than phase currents are used as state variables to describe the electromagnetic behavior of the…
-
Artikel Jurnal
Sensitivity Analysis and Uncertainty Quantification of Thermal Behavior for Permanent Magnet Synchronous Machines
Uncertainty is a key issue in thermal analysis and management for permanent magnet (PM) synchronous machines (PMSMs) and always occurs in both conduction and convection heat transfers. However, this issue has not been evaluated thoroughly. Therefore, this paper presents a comprehensive sensitivity…
-
Artikel Jurnal
In‐depth investigation of inter‐turn short‐circuit faults of surface‐mounted permanent magnet machines with series‐parallel coil connections
Abstract A general analytical model is developed in a concise block matrix form for surface‐mounted permanent magnet (SPM) machines with series‐parallel coil connections under inter‐turn short circuit (ITSC) fault. In the model, branch currents are used as state variables and inductances of…
-
Artikel Jurnal
Online Simultaneous Identification of Multi-Parameters for Interior PMSMs Under Sensorless Control
Under sensorless control, the position estimation error in interior permanent magnet (PM) synchronous machines will lead to parameter identification errors and a rank-deficiency issue. This paper proposes a parameter identification model that is independent of position error by combining the…
-
Artikel Jurnal
A Review on Transverse Flux Permanent Magnet Machines for Wind Power Applications
Transverse flux permanent magnet (TFPM) machines are a potential candidate for direct-drive wind power application due to high torque and power densities. The operating principle of TFPM machines is firstly described with various topologies available in literature, with the placement of magnets as…
-
Artikel Jurnal
Comparison of direct‐drive Vernier wind generators for potential use at ≥10 MW power level
Abstract This paper investigates the benefits and challenges of the multi‐MW direct‐drive offshore wind Vernier generators. It is worth noting that the comparison of generator topologies presented in ref. [1] was for the same power level and therefore a reduced machine volume for the…
-
Artikel Jurnal
System-Level Investigation of Multi-MW Direct-Drive Wind Power PM Vernier Generators
Surface mounted permanent magnet Vernier (SPM-V) machines are known for their high torque density but relatively poor power factor compared to conventional SPM machines. The high torque density feature of the SPM-V machines is desirable for direct-drive offshore wind power applications as it leads…
-
Artikel Jurnal
Permanent Magnet Vernier Machines for Direct-Drive Offshore Wind Power: Benefits and Challenges
Permanent magnet Vernier (PM-V) machines, at low power levels (few kWs), have shown a great potential to improve the torque density of existing direct-drive PM machines without much compromising on efficiency or making the machine structure more complicated. An improved torque density is very…
-
Artikel Jurnal
Performance of superconducting generators with different topologies under fault conditions
This paper compares the short-circuit performance of superconducting (SC) generators with three different topologies, i.e. iron-cored stator and rotor, iron-cored stator and air-cored rotor, and air-cored stator and rotor. The analysis is based on three-phase short-circuit fault, and finite element…
-
Artikel Jurnal
Direct‐Drive Vernier Machine With Innovative Stator Design for Enhanced Demagnetisation Withstand Capability
ABSTRACT This paper proposes a Vernier machine with an improved stator design that adopts open stator slots and permanent magnets installed on both the rotor and stator. Compared to an existing Vernier machine in the literature, referred to as Design 1, the exclusive stator slots for permanent…
-
Artikel Jurnal
Psychometric Properties of the General Decision‐Making Style (GDMS‐20) Questionnaire in a Lebanese Arab Adult Sample
ABSTRACT Background Decision‐making styles reflect stable individual tendencies in approaching choices and have been found to relate to health behaviors, clinical decisions, and psychosocial outcomes. The General Decision‐Making Style (GDMS) questionnaire is a widely used instrument that assesses…
-
Artikel Jurnal
Financial toxicity and distress among prostate cancer patients in Lebanon: a cross-sectional study
BackgroundFinancial toxicity is a major component of the cancer experience. Prostate cancer often requires prolonged treatment and follow-up, increasing financial and psychological burden. Lebanon's economic crisis has disrupted health-care financing and insurance coverage, potentially worsening…