Biblio Discovery — Demo Discovery Service

27 hasil untuk "Muhammad Al Muttaqii"

Menampilkan 1–20 · 0,65 detik · RSS

  1. Artikel Jurnal

    Production of Biofuel by Hydrocracking of Cerbera Manghas Oil Using Co-Ni/HZSM-5 Catalyst : Effect of Reaction Temperature

    Lenny Marlinda; Muhammad Al Muttaqii; Achmad Roesyadi

    Journal of Pure and Applied Chemistry Research, Vol. 5 No. 3 · 2016 · Inggris · DOAJ

    This research aims to investigate the effect of various reaction temperatures on the hydrocracking of Cerbera manghas oil to produce biofuel as a paraffin-rich mixture of hydrocarbons with Co-Ni/HZSM-5 catalyst. Co-Ni/HZSM-5 catalyst was prepared by incipient wetness impregnation. The catalyst was…

  2. Artikel Jurnal

    KARAKTERISTIK MATERIAL KOMPOSIT BERBASIS BATUAN BASALT DAN DROSS AL

    Muhammad Al Muttaqii; Fauzul Kurniajaya; Agung Efrio Hadi

    Rekayasa Mesin, Vol. 13 No. 1 · 2022 · Indonesia · DOAJ

    …basalt was made into a composite with the composition of basalt and dross Al of 45:30%, 55:20%, 65:10% and polyester resin 25%. The material used has particle sizes of 100, 150, and 200 mesh. The materials were made by mixing for 5, 10, and 15 min. Then carried out the compaction process with a…

  3. Artikel Jurnal

    Hydrocracking of Non-edible Vegetable Oils with Co-Ni/HZSM-5 Catalyst to Gasoil Containing Aromatics

    Danawati Hari Prajitno; Achmad Roesyadi; Muhammad Al-Muttaqii dkk.

    Bulletin of Chemical Reaction Engineering & Catalysis, Vol. 12 No. 3 · 2017 · Indonesia · DOAJ SINTA 1Scopus

    Biofuel has been considered as one of the environmentally friendly energy sources to substitute fossil fuel derived from non-edible vegetable oil. This research aims to investigate the effect of the non-edible vegetable oil composition on a specific hydrocarbons distribution contained in biofuel…

  4. Artikel Jurnal

    Bio-kerosene and Bio-gasoil from Coconut Oils via Hydrocracking Process over Ni-Fe/HZSM-5 Catalyst

    Muhammad Al-Muttaqii; Firman Kurniawansyah; Danawati Hari Prajitno dkk.

    Bulletin of Chemical Reaction Engineering & Catalysis, Vol. 14 No. 2 · 2019 · Indonesia · DOAJ SINTA 1Scopus

    In this study, hydrocracking of coconut oil over Ni-Fe/HZSM-5 catalyst was carried out in a batch reactor under different reaction temperature. Coconut oil is proposed as one of the potential feedstock for biofuel production. The Ni-Fe/HZSM-5 catalyst was prepared by incipient wetness impregnation…

  5. Artikel Jurnal

    Kinerja Katalis Ni-Cu/HZSM-5 dalam Pembuatan Biogasoil dari Minyak Bintaro (Cerbera Manghas) dengan Proses Hydrocracking

    Afrida Nur Aini; Muhammad Al-Muttaqii; Achmad Roesyadi dkk.

    Berkala Sainstek, Vol. 8 No. 3 · 2020 · Indonesia · DOAJ

    Catalytic cracking dan hydroprocessing merupakan dua proses yang digunakan untuk mengubah minyak nabati menjadi biofuel, gabungan dari kedua proses tersebut dinamakan reaksi hydrocracking. Minyak bintaro yang bersifat non-edibleoil serta memiliki kadar minyak cukup banyak yakni sebesar 35-50% dapat…

  6. Artikel Jurnal

    Hydrocracking of Coconut Oil over Ni-Fe/HZSM-5 Catalyst to Produce Hydrocarbon Biofuel

    Muhammad Al-Muttaqii; Firman Kurniawansyah; Danawati Hari Prajitno dkk.

    Indonesian Journal of Chemistry, Vol. 19 No. 2 · 2019 · Inggris · DOAJ Scopus

    This present study was aimed to investigate the hydrocracking of coconut oil using Ni-Fe/HZSM-5 catalyst in a batch reactor at three reaction temperatures (350, 375, and 400 °C). The Ni-Fe/HZSM-5 catalyst was prepared by using incipient wetness impregnation. The Ni-Fe/HZSM-5 catalyst was…

  7. Artikel Jurnal

    THE ANALYSIS COMPARISON OF BASALT VIA MELTING PROCESS FROM MATARAM BARU (EAST LAMPUNG) WITH SLOW AND FAST COOLING METHOD OVER XRD APPROACH

    David Candra; Kusno Isnugroho; Yusup Hendronursito dkk.

    Multitek Indonesia, Vol. 13 No. 2 · 2020 · Indonesia · DOAJ

    The process of melting basalt stone from Mataram Baru, East Lampung has been carried out over a mini shaft furnace with a temperature of 1600 ˚C. Basalt stone with the smelting process was modified with slow and fast cooling methods. Based XRD result shows the methods were significant applied to…

  8. Artikel Jurnal

    STUDY OF MAKING POLYESTER RESIN MATRIX COMPOSITES USING BASALT SCORIA POWDER FILLERS TO TENSILE STRENGTH AND COMPRESSIVE STRENGTH

    David Candra Birawidha; Kusno Isnugroho; Yusup Hendronursito dkk.

    Jurnal Ilmiah SINERGI, Vol. 25 No. 3 · 2021 · Inggris · DOAJ Scopus

    An experimental study on the manufacture of polyester resin matrix composites using basalt powder as a reinforcing filler has been carried out. Basalt is a volcanic igneous rock often found in East Lampung and has not been utilised. Basalt is chosen as a reinforcing filler because basalt has…

  9. Artikel Jurnal

    Hydrocracking of Cerbera manghas Oil with Co-Ni/HZSM-5 as Double Promoted Catalyst

    Lenny Marlinda; Muhammad Al-Muttaqii; Ignatius Gunardi dkk.

    Bulletin of Chemical Reaction Engineering & Catalysis, Vol. 12 No. 2 · 2017 · Indonesia · DOAJ SINTA 1Scopus

    The effect of various reaction temperature on the hydrocracking of Cerbera manghas oil to produce a paraffin-rich mixture of hydrocarbons with Co-Ni/HZSM-5 as doubled promoted catalyst were studied. The Co-Ni/HZSM-5 catalyst with various metal loading and metal ratio was prepared by incipient…

  10. Artikel Jurnal

    Analysis of Fine Glass Waste Addition as a Filler Material for Sand Substitution on the Properties of Mortar Products

    Suharto Suharto; Muhammad Amin; Muhammad Al Muttaqii dkk.

    Teknik, Vol. 42 No. 3 · 2021 · Indonesia · DOAJ

    Inorganic glass waste can replace sand in mortar production due to its SiO2 content being greater than 70%. This study aims to analyze the increase in mortal product agility due to the substitution of sand and reducing environmental pollution. The fine glass waste used is restrained on 80 and 120…

  11. Artikel Jurnal

    Cobalt-nickel supported on desilicated HZSM-5 for the conversion of Reutealis trisperma (blanco) airy shaw oil to liquid hydrocarbon products

    Lenny Marlinda; Rahmi; Abdul Aziz dkk.

    Communications in Science and Technology, Vol. 10 No. 1 · 2025 · Inggris · DOAJ Scopus

    Desilication/alkaline treatment and metal impregnation were used to create the HZSM-5 catalyst supported by Co-Ni. These catalysts' isotherm patterns combined type I and type IV isotherms. This isotherm pattern showed a hysteresis loop at comparatively higher pressures. The pore size distribution…

  12. Artikel Jurnal

    The local mineral potential from East Lampung - Indonesia: the use of basalt rock as a stone meal for cassava plant

    Yusup Hendronursito; Junita Barus; Muhammad Amin dkk.

    Journal of Degraded and Mining Lands Management, Vol. 7 No. 1 · 2019 · Inggris · DOAJ Scopus

    Indonesia has an abundant amount of basalt rocks resources, including in East Lampung Regency of Lampung Province. This basalt has not been used optimally and only be used as a foundation. The use of basalt as soil fertilizer also known as the stone meal. This study focused on the effect of using…

  13. Artikel Jurnal

    Biofuel from hydrocracking of Cerbera manghas oil over Ni-Zn/HZSM-5 catalyst

    Lenny Marlinda; Danawati Hari Prajitno; Achmad Roesyadi dkk.

    Eclética Química, Vol. 47 No. 1 · 2022 · Inggris · DOAJ Scopus

    The effects of reaction temperature on the hydrocarbon composition of biofuel produced in hydrocracking of Cerbera manghas oil with Ni-Zn/HZSM-5 catalyst were investigated. The incipient wetness impregnation method was applied to prepare the Ni-Zn/HZSM-5 catalysts. Furthermore, the properties of…

  14. Artikel Jurnal Teks lengkap

    Monosodium Glutamate as Selective Lixiviant for Alkaline Leaching of Zinc and Copper from Electric Arc Furnace Dust

    Erik Prasetyo; Corby Anderson; Fajar Nurjaman dkk.

    Metals, Vol. 10 No. 5 · 2020 · Inggris · DOAJ Scopus

    …of zinc (reaching 99%) and copper (reaching 86%) leaving behind Fe, Al, Ca and Mg in the leaching residue. The separation factor (concentration ratio in pregnant leach solution) between zinc vs. other elements, and copper vs. other elements in the optimum condition could reach 11,700 and 250 times…

  15. Artikel Jurnal

    Conversion of crude palm oil to biofuels via catalytic hydrocracking over NiN-supported natural bentonite

    Hasanudin Hasanudin; Wan Ryan Asri; Utari Permatahati dkk.

    AIMS Energy, Vol. 11 No. 2 · 2023 · Inggris · DOAJ Scopus

    Nickel nitride supported on natural bentonite was prepared and tested for hydrocracking Crude Palm Oil (CPO). The catalyst was prepared using the wet impregnation method and various nickel nitride loading. Subsequently, the nickel nitrate-bentonite was calcined and nitrided under H2 steam. The…

  16. Artikel Jurnal

    THE INFLUENCE OF BASALT MINERALS AS CEMENT SUBSTITUTION MATERIALS IN MORTAR

    Muhammad Amin; David Candra Birawidha; Kusno Isnugroho dkk.

    Acta Polytechnica, Vol. 59 No. 6 · 2019 · Inggris · DOAJ Scopus

    This study was conducted to determine the effect of the concentration of basalt as a cement substitution material in mortar. Basalt was analysed by XRD and XRF. From the XRD results, the diffractogram shows the dominant phases, such as anorthite, augite, forsterite, and quartz or silicon oxide…

  17. Artikel Jurnal

    Performance of In-Situ Stirring Batch Reactor Transesterification of Nannochloropsis sp Microalgae into Biodiesel

    Yustia Wulandari Mirzayanti; Lenny Marlinda; Hery Irawan dkk.

    International Journal of Technology, Vol. 15 No. 4 · 2024 · Inggris · DOAJ Scopus

    In-situ stirring batch reactor transesterification is a widely used method for the conversion of various biomass into biodiesel, particularly Nannochloropsis sp microalgae. Therefore, this study aims to investigate the effect of CaO/Hydrotalcite catalyst loading ratio and stirring rate on in situ…

  18. Artikel Jurnal

    Conversion of Sunan Candlenut Oil to Aromatic Hydrocarbons with Hydrocracking Process Over Nano-HZSM-5 Catalyst

    Muhammad Al Muttaqii; Maja Pranata Marbun; Sudibyo Sudibyo dkk.

    Bulletin of Chemical Reaction Engineering & Catalysis, Vol. 19 No. 1 · 2024 · Indonesia · DOAJ SINTA 1Scopus

    In this paper, the catalysts (Nano-HZSM-5 and Fe-La/nano HZSM-5) were prepared with incipient wetness impregnation and applied for hydrocracking of Sunan candlenut oil. The hydrocracking process was conducted in a batch reactor with a pressure of 20-30 bar H2 gas for 2 h under various temperatures…

  19. Artikel Jurnal Teks lengkap

    Fractionation of Transition Metals by Solvent Extraction and Precipitation from Tannic Acid-Acetic Acid Leachate as a Product of Lithium-Ion Battery Leaching

    Erik Prasetyo; Corby Anderson; Arya Fitra Jaya dkk.

    Metals, Vol. 12 No. 5 · 2022 · Inggris · DOAJ Scopus

    Solvent extraction and precipitation schemes are applied to isolate copper, cobalt, manganese and nickel from leachate, produced from spent lithium-ion battery leaching using tannic acid-acetic acid as lixiviant. The metal separation and purification were developed based on a ketoxime (LIX® 84-I)…

  20. Artikel Jurnal

    Conversion of Isopropanol to Diisopropyl Ether over Cobalt Phosphate Modified Natural Zeolite Catalyst

    Hasanudin Hasanudin; Wan Ryan Asri; Rahmawati Rahmawati dkk.

    Bulletin of Chemical Reaction Engineering & Catalysis, Vol. 19 No. 2 · 2024 · Indonesia · DOAJ SINTA 1Scopus

    This study aims to produce diisopropyl ether (DIPE) via isopropanol dehydration using cobalt-phosphate-supported natural zeolite catalysts. The catalytic activities of the zeolite/CoO and zeolite/Co(H2PO4)2 were compared. The as-prepared catalysts were assessed using X-ray diffraction (XRD)…