27 hasil untuk "Muhammad Al-Muttaqii"
Menampilkan 1–20 · 0,51 detik · RSS
-
Artikel Jurnal
Production of Biofuel by Hydrocracking of Cerbera Manghas Oil Using Co-Ni/HZSM-5 Catalyst : Effect of Reaction Temperature
This research aims to investigate the effect of various reaction temperatures on the hydrocracking of Cerbera manghas oil to produce biofuel as a paraffin-rich mixture of hydrocarbons with Co-Ni/HZSM-5 catalyst. Co-Ni/HZSM-5 catalyst was prepared by incipient wetness impregnation. The catalyst was…
-
Artikel Jurnal
KARAKTERISTIK MATERIAL KOMPOSIT BERBASIS BATUAN BASALT DAN DROSS AL
…basalt was made into a composite with the composition of basalt and dross Al of 45:30%, 55:20%, 65:10% and polyester resin 25%. The material used has particle sizes of 100, 150, and 200 mesh. The materials were made by mixing for 5, 10, and 15 min. Then carried out the compaction process with a…
-
Artikel Jurnal
Hydrocracking of Non-edible Vegetable Oils with Co-Ni/HZSM-5 Catalyst to Gasoil Containing Aromatics
Biofuel has been considered as one of the environmentally friendly energy sources to substitute fossil fuel derived from non-edible vegetable oil. This research aims to investigate the effect of the non-edible vegetable oil composition on a specific hydrocarbons distribution contained in biofuel…
-
Artikel Jurnal
Bio-kerosene and Bio-gasoil from Coconut Oils via Hydrocracking Process over Ni-Fe/HZSM-5 Catalyst
In this study, hydrocracking of coconut oil over Ni-Fe/HZSM-5 catalyst was carried out in a batch reactor under different reaction temperature. Coconut oil is proposed as one of the potential feedstock for biofuel production. The Ni-Fe/HZSM-5 catalyst was prepared by incipient wetness impregnation…
-
Artikel Jurnal
Kinerja Katalis Ni-Cu/HZSM-5 dalam Pembuatan Biogasoil dari Minyak Bintaro (Cerbera Manghas) dengan Proses Hydrocracking
Catalytic cracking dan hydroprocessing merupakan dua proses yang digunakan untuk mengubah minyak nabati menjadi biofuel, gabungan dari kedua proses tersebut dinamakan reaksi hydrocracking. Minyak bintaro yang bersifat non-edibleoil serta memiliki kadar minyak cukup banyak yakni sebesar 35-50% dapat…
-
Artikel Jurnal
Hydrocracking of Coconut Oil over Ni-Fe/HZSM-5 Catalyst to Produce Hydrocarbon Biofuel
This present study was aimed to investigate the hydrocracking of coconut oil using Ni-Fe/HZSM-5 catalyst in a batch reactor at three reaction temperatures (350, 375, and 400 °C). The Ni-Fe/HZSM-5 catalyst was prepared by using incipient wetness impregnation. The Ni-Fe/HZSM-5 catalyst was…
-
Artikel Jurnal
THE ANALYSIS COMPARISON OF BASALT VIA MELTING PROCESS FROM MATARAM BARU (EAST LAMPUNG) WITH SLOW AND FAST COOLING METHOD OVER XRD APPROACH
The process of melting basalt stone from Mataram Baru, East Lampung has been carried out over a mini shaft furnace with a temperature of 1600 ˚C. Basalt stone with the smelting process was modified with slow and fast cooling methods. Based XRD result shows the methods were significant applied to…
-
Artikel Jurnal
STUDY OF MAKING POLYESTER RESIN MATRIX COMPOSITES USING BASALT SCORIA POWDER FILLERS TO TENSILE STRENGTH AND COMPRESSIVE STRENGTH
An experimental study on the manufacture of polyester resin matrix composites using basalt powder as a reinforcing filler has been carried out. Basalt is a volcanic igneous rock often found in East Lampung and has not been utilised. Basalt is chosen as a reinforcing filler because basalt has…
-
Artikel Jurnal
Hydrocracking of Cerbera manghas Oil with Co-Ni/HZSM-5 as Double Promoted Catalyst
The effect of various reaction temperature on the hydrocracking of Cerbera manghas oil to produce a paraffin-rich mixture of hydrocarbons with Co-Ni/HZSM-5 as doubled promoted catalyst were studied. The Co-Ni/HZSM-5 catalyst with various metal loading and metal ratio was prepared by incipient…
-
Artikel Jurnal
Analysis of Fine Glass Waste Addition as a Filler Material for Sand Substitution on the Properties of Mortar Products
Inorganic glass waste can replace sand in mortar production due to its SiO2 content being greater than 70%. This study aims to analyze the increase in mortal product agility due to the substitution of sand and reducing environmental pollution. The fine glass waste used is restrained on 80 and 120…
-
Artikel Jurnal
Cobalt-nickel supported on desilicated HZSM-5 for the conversion of Reutealis trisperma (blanco) airy shaw oil to liquid hydrocarbon products
Desilication/alkaline treatment and metal impregnation were used to create the HZSM-5 catalyst supported by Co-Ni. These catalysts' isotherm patterns combined type I and type IV isotherms. This isotherm pattern showed a hysteresis loop at comparatively higher pressures. The pore size distribution…
-
Artikel Jurnal
The local mineral potential from East Lampung - Indonesia: the use of basalt rock as a stone meal for cassava plant
Indonesia has an abundant amount of basalt rocks resources, including in East Lampung Regency of Lampung Province. This basalt has not been used optimally and only be used as a foundation. The use of basalt as soil fertilizer also known as the stone meal. This study focused on the effect of using…
-
Artikel Jurnal
Biofuel from hydrocracking of Cerbera manghas oil over Ni-Zn/HZSM-5 catalyst
The effects of reaction temperature on the hydrocarbon composition of biofuel produced in hydrocracking of Cerbera manghas oil with Ni-Zn/HZSM-5 catalyst were investigated. The incipient wetness impregnation method was applied to prepare the Ni-Zn/HZSM-5 catalysts. Furthermore, the properties of…
-
Artikel Jurnal Teks lengkap
Monosodium Glutamate as Selective Lixiviant for Alkaline Leaching of Zinc and Copper from Electric Arc Furnace Dust
…of zinc (reaching 99%) and copper (reaching 86%) leaving behind Fe, Al, Ca and Mg in the leaching residue. The separation factor (concentration ratio in pregnant leach solution) between zinc vs. other elements, and copper vs. other elements in the optimum condition could reach 11,700 and 250 times…
-
Artikel Jurnal
Conversion of crude palm oil to biofuels via catalytic hydrocracking over NiN-supported natural bentonite
Nickel nitride supported on natural bentonite was prepared and tested for hydrocracking Crude Palm Oil (CPO). The catalyst was prepared using the wet impregnation method and various nickel nitride loading. Subsequently, the nickel nitrate-bentonite was calcined and nitrided under H2 steam. The…
-
Artikel Jurnal
THE INFLUENCE OF BASALT MINERALS AS CEMENT SUBSTITUTION MATERIALS IN MORTAR
This study was conducted to determine the effect of the concentration of basalt as a cement substitution material in mortar. Basalt was analysed by XRD and XRF. From the XRD results, the diffractogram shows the dominant phases, such as anorthite, augite, forsterite, and quartz or silicon oxide…
-
Artikel Jurnal
Performance of In-Situ Stirring Batch Reactor Transesterification of Nannochloropsis sp Microalgae into Biodiesel
In-situ stirring batch reactor transesterification is a widely used method for the conversion of various biomass into biodiesel, particularly Nannochloropsis sp microalgae. Therefore, this study aims to investigate the effect of CaO/Hydrotalcite catalyst loading ratio and stirring rate on in situ…
-
Artikel Jurnal
Conversion of Sunan Candlenut Oil to Aromatic Hydrocarbons with Hydrocracking Process Over Nano-HZSM-5 Catalyst
In this paper, the catalysts (Nano-HZSM-5 and Fe-La/nano HZSM-5) were prepared with incipient wetness impregnation and applied for hydrocracking of Sunan candlenut oil. The hydrocracking process was conducted in a batch reactor with a pressure of 20-30 bar H2 gas for 2 h under various temperatures…
-
Artikel Jurnal Teks lengkap
Fractionation of Transition Metals by Solvent Extraction and Precipitation from Tannic Acid-Acetic Acid Leachate as a Product of Lithium-Ion Battery Leaching
Solvent extraction and precipitation schemes are applied to isolate copper, cobalt, manganese and nickel from leachate, produced from spent lithium-ion battery leaching using tannic acid-acetic acid as lixiviant. The metal separation and purification were developed based on a ketoxime (LIX® 84-I)…
-
Artikel Jurnal
Conversion of Isopropanol to Diisopropyl Ether over Cobalt Phosphate Modified Natural Zeolite Catalyst
This study aims to produce diisopropyl ether (DIPE) via isopropanol dehydration using cobalt-phosphate-supported natural zeolite catalysts. The catalytic activities of the zeolite/CoO and zeolite/Co(H2PO4)2 were compared. The as-prepared catalysts were assessed using X-ray diffraction (XRD)…