10 hasil untuk "Shanglei Yang"
Menampilkan 1–10 · 1,00 detik · RSS
-
Artikel Jurnal
Microstructure and Fatigue Properties of 6061 Aluminum Alloy Laser-MIG Hybrid Welding Joint
Laser-MIG hybrid welding of 6061-T6 aluminum alloy was carried out with ER4043 welding wire, and the microstructure and fatigue properties of the joint were studied. The grain size of HAZ is larger than that of base metal (BM) due to the influence of welding heat cycle. Snowflake-like equiaxed…
-
Artikel Jurnal
Microstructure and fatigue damage mechanism of 6082-T6 aluminium alloy welded joint
In this paper, 6mm thick 6082-T6 high-strength aluminium alloy is taken as the research object, and CLOOS ROMAT-3500 industrial robot MIG welder is used for welding. High-cycle fatigue test is carried out on welded joint and 6082-T6 base metal. Microstructure, microhardness, tensile properties and…
-
Artikel Jurnal
Study on fatigue crack growth of electron beam selective melting of titanium alloy
In the application of additive manufacturing, it is inevitable to use some formed parts with a smaller height. The analysis of various mechanical properties of these formed parts is the focus of research. In this paper, the fatigue performance of a titanium alloy specimen with a 10 mm height and…
-
Artikel Jurnal Teks lengkap
Study on Microstructure and Fatigue Damage Mechanism of 6082 Aluminum Alloy T-Type Metal Inert Gas (MIG) Welded Joint
In this experiment, the T-joint of a 6082 aluminum alloy was welded by metal inert gas (MIG) welding and a fatigue test was carried out at room temperature. The mechanisms of generating pores and of fatigue fracture in welded joints are revealed in the case of incomplete penetration. There are two…
-
Artikel Jurnal
Dynamic Mechanical Response Monitoring and Fatigue Life Assessment of Long-Life Asphalt Pavement Based on Fiber Bragg Grating Sensor
Relying on actual engineering projects, this investigation carried out the application of fiber Bragg grating (FBG) sensors in monitoring the mechanical response of long-life asphalt pavement structures and proposed a deployment scheme for FBG sensors to monitor the mechanical response of pavement…
-
Artikel Jurnal
Investigation on creep mechanical properties and the relationship between creep cavities and deformation activation energy in 6082-T6 aluminum alloy joints welded by ring-spot laser
The 6082-T6 aluminum alloy welded joints were solution-treated at 480 °C and underwent tensile creep tests at 180 °C, 260 °C, and 450 °C. Results showed that the creep strain index n was significantly influenced by temperature and stress, with temperature having a greater impact. Higher…
-
Artikel Jurnal
Study on the effect of Ar–He shielding gas on the weld formation, microstructure and mechanical properties of 5083 aluminum alloy weld
In this paper, the ER5356 aluminum alloy wire was used for cold metal transfer (CMT) welding of the 5083-H111 base metal with 20 mm thickness. The effects of four shielding gases, which were 100%Ar, 75%Ar+25%He, 50%Ar+50%He and 100%He on the weld formation, microstructure and mechanical properties…
-
Artikel Jurnal Teks lengkap
Effect of Al2O3 Nanoparticles as Reinforcement on the Tensile Behavior of Al-12Si Composites
Al2O3 nanoparticle-reinforced Al-12Si matrix composites were successfully fabricated by hot pressing and subsequent hot extrusion. The influence of weight fraction of Al2O3 particles on the microstructure, mechanical properties, and the corresponding strengthening mechanisms were investigated in…
-
Artikel Jurnal
Research on quality and performance of FRM laser welded joints with different shaft length ratios elliptical trajectory
The emerging Flexible Ring Mode(FRM) laser technology has shown great potential for welding copper and its alloys with high reflectivity and has been widely used. The design of the welding trajectory significantly affects the porosity and performance of welded joints. This paper first selects the…
-
Artikel Jurnal
High-temperature tensile properties and interface structure of Ni–Fe dissimilar butt joints welded using the cold metal transfer process
Ni–Fe dissimilar butt joints (Inconel 718 and SUS316 sheets) were welded with an Ni-based filler metal using the cold metal transfer (CMT) process. The morphology of the joints was analyzed to elucidate the formation characteristics of the low-dilution-rate welding joints. The tensile strength of…