Biblio Discovery — Demo Discovery Service

14 hasil untuk "Vahid Javaheri"

Menampilkan 1–14 · 0,03 detik · RSS

  1. Artikel Jurnal Teks lengkap

    Insight to the Influence of Ti Addition on the Strain-Induced Martensitic Transformation in a High (about 7 wt.%) Mn Stainless Steel

    Saeed Sadeghpour; Vahid Javaheri; Ahmad Kermanpur dkk.

    Metals, Vol. 10 No. 5 · 2020 · Inggris · DOAJ Scopus

    The kinetics of strain-induced martensite (SIM) formation in a Ti-bearing 201L stainless steel were evaluated and compared to the existing results of two conventional stainless steel grades; i.e., 201L and 304L AISI. The effects of strain rate and rolling pass reduction on the kinetics of SIM…

  2. Artikel Jurnal Teks lengkap

    On the Role of Grain Size and Carbon Content on the Sensitization and Desensitization Behavior of 301 Austenitic Stainless Steel

    Satish Kolli; Vahid Javaheri; Jukka Kömi dkk.

    Metals, Vol. 9 No. 11 · 2019 · Inggris · DOAJ Scopus

    The effect of grain size in the range 72 to 190 μm and carbon content in the range 0.105−0.073 wt.% on the intergranular corrosion of the austenitic stainless steel 301 has been investigated. Grain boundary chromium depletion has been studied directly using energy dispersive X-ray spectroscopy…

  3. Artikel Jurnal

    Data related to the microstructural identification and analyzing the mechanical properties of maraging stainless steel 13Cr10Ni1.7Mo2Al0.4Mn0.4Si (commercially known as CX) processed by laser powder bed fusion method

    Shahriar Afkhami; Vahid Javaheri; Edris Dabiri dkk.

    Data in Brief, Vol. 41 · 2022 · Inggris · DOAJ Scopus

    The data available in this article presents the microstructural information achieved via scanning electron microscopy and electron backscatter diffraction to evaluate the microstructure of maraging stainless steel 13Cr10Ni1.7Mo2Al0.4Mn0.4Si, in its as-built and heat-treated conditions, fabricated…

  4. Artikel Jurnal Teks lengkap

    The Influence of Rapid Tempering on the Mechanical and Microstructural Characteristics of 51CrV4 Steel

    Antti Kaijalainen; Oskari Haiko; Saeed Sadeghpour dkk.

    Metals, Vol. 14 No. 1 · 2024 · Inggris · DOAJ Scopus

    The microstructure and mechanical properties of a low-alloy medium carbon steel (Fe-0.5C-0.9Mn-1Cr-0.16V, in wt.%) were investigated after rapid tempering and compared with a conventionally tempered counterpart. The conventional thermal cycle was performed in a laboratory-scale box furnace while…

  5. Artikel Jurnal

    INSIGHT TO THE MICROSTRUCTURE CHARACTERIZATION OF A HP AUSTENITIC HEAT RESISTANT STEEL AFTER LONG-TERM SERVICE EXPOSURE

    Mahyar Mohammadnezhad; Vahid Javaheri; Morteza Shamanian dkk.

    Acta Metallurgica Slovaca, Vol. 24 No. 4 · 2018 · Inggris · DOAJ Scopus

    Heat-resistant steels of HP series (Fe-25Cr-35Ni) are used in high temperature structural applications. Their composition include Nb as strong carbide former. Electron Backscatter Diffraction (EBSD) investigations revealed that, in the as-cast condition, alloys exhibit austenitic matrix with…

  6. Artikel Jurnal

    Physically based modeling, characterization and design of an induction hardening process for a new slurry pipeline steel

    Vahid Javaheri; Aarne Pohjonen; John Inge Asperheim dkk.

    Materials & Design, Vol. 182 · 2019 · Inggris · DOAJ Scopus

    Numerical and Gleeble experimental data are combined to predict potential microstructure and hardness profiles through the wall thickness of an induction hardened slurry transportation pipe made of a recently developed 0.4 wt% C, Nb-microalloyed steel. The calculated thermal history of various…

  7. Artikel Jurnal

    Design considerations for hydrogen embrittlement resistance: The influence of dislocation density and substructures on hydrogen-assisted cracking in high-Mn TWIP steel

    Mohammad Moallemi; Sung-Joon Kim; Hyung-Jun Cho dkk.

    Materials & Design, Vol. 256 · 2025 · Inggris · DOAJ Scopus

    This study investigates the hydrogen embrittlement (HE) behavior of high-manganese TWIP-assisted steel by comparing microstructures with high and low dislocation (HD and LD) densities. The HD microstructure exhibited higher hydrogen absorption and a greater density of hydrogen-assisted cracks…

  8. Artikel Jurnal Teks lengkap

    Characterization of Coarse-Grained Heat-Affected Zones in Al and Ti-Deoxidized Offshore Steels

    Henri Tervo; Antti Kaijalainen; Vahid Javaheri dkk.

    Metals, Vol. 10 No. 8 · 2020 · Inggris · DOAJ Scopus

    Deterioration of the toughness in heat-affected zones (HAZs) due to the thermal cycles caused by welding is a known problem in offshore steels. Acicular ferrite (AF) in the HAZ is generally considered beneficial regarding the toughness. Three experimental steels were studied in order to find…

  9. Artikel Jurnal

    Rapid tempering of a medium-carbon martensitic steel: In-depth exploration of the microstructure – mechanical property evolution

    Vahid Javaheri; Sakari Pallaspuro; Saeed Sadeghpour dkk.

    Materials & Design, Vol. 231 · 2023 · Inggris · DOAJ Scopus

    Rapid tempering is a remarkable sustainable and energy-efficient way to modify properties of as-quenched martensite, particularly its toughness and ductility. In this work, tensile and fracture toughness properties, and microstructural evolution of a medium-carbon (0.4 wt%), low-alloy steel under…

  10. Artikel Jurnal

    Thermomechanical simulation of the heat-affected zones in welded ultra-high strength steels: Microstructure and mechanical properties

    Shahriar Afkhami; Vahid Javaheri; Mohsen Amraei dkk.

    Materials & Design, Vol. 213 · 2022 · Inggris · DOAJ Scopus

    Ultra-high strength steels (UHSS) have a determining role in construction and industry. Furthermore, welding as the primary joining process for steel has a similar role in promoting its applications. Therefore, welded UHSS have a vital role in related applications. However, due to their complex…

  11. Artikel Jurnal Teks lengkap

    Comparison of Impact Toughness in Simulated Coarse-Grained Heat-Affected Zone of Al-Deoxidized and Ti-Deoxidized Offshore Steels

    Henri Tervo; Antti Kaijalainen; Vahid Javaheri dkk.

    Metals, Vol. 11 No. 11 · 2021 · Inggris · DOAJ Scopus

    The presence of acicular ferrite (AF) in the heat-affected zone (HAZ) of steels used offshore is generally seen as beneficial for toughness. In this study, the effects of varying fractions of AF (0–49 vol.%) were assessed in the simulated, unaltered and coarse-grained heat-affected zones (CGHAZ) of…

  12. Artikel Jurnal

    Design of tough, ductile direct quenched and partitioned advanced high-strength steel with tailored silicon content

    Sumit Ghosh; Pentti Kaikkonen; Vahid Javaheri dkk.

    Journal of Materials Research and Technology, Vol. 17 · 2022 · Inggris · DOAJ Scopus

    The novel processing concept of direct quenching and partitioning (DQ&P) has been explored with a medium-carbon (0.4 wt.% C) steel to evaluate and optimize the processing route for excellent property combinations. New compositional design approach was based on physical simulation studies aiming to…

  13. Artikel Jurnal

    Accelerated alloy design through a fully integrated High-Throughput computational Framework: Case study on medium manganese steels

    Mahmoud Elaraby; Mohammed Ali; Saeed Sadeghpour dkk.

    Materials & Design, Vol. 266 · 2026 · Inggris · DOAJ Scopus

    The design of advanced high-strength steels requires an exceptional balance of strength and ductility, as well as improved resistance to hydrogen embrittlement. However, the vast compositional and processing space presents a significant systematic challenge. To address this, we developed a fully…

  14. Artikel Jurnal

    Decoding the role of pre-existing austenite in transformation pathways during slow heating of cold-rolled medium-Mn steel for process design

    Roohallah Surki Aliabad; Saeed Sadeghpour; Pentti Karjalainen dkk.

    Materials & Design, Vol. 263 · 2026 · Inggris · DOAJ Scopus

    This study reveals a previously unreported transformation pathway governing austenite evolution during slow continuous heating of cold-rolled medium-Mn steel (Fe–0.4C–6Mn–2Al–1Si–0.05Nb, wt.%). Using a correlative approach combining in-situ high-energy X-ray diffraction, electron microscopy, atom…