873 hasil
Menampilkan 1–20 · 0,58 detik · RSS
Science of Sintering
Scopus
ISSN 0350-820X · International Institute for the Science of Sintering, Beograd · 873 artikel di indeks
-
Artikel Jurnal Teks lengkap
Comprehensive characterization of natural bentonite clay: Implications for enhanced performance in ceramics manufacturing
Potential industrial applications of bentonite from a regional deposit were investigated. The material was investigated beyond state-of-the-art to optimize its quality for use in ceramic sector. Representative bentonite samples (B1, B2, B3) were analyzed. The grain size was determined by wet…
-
Artikel Jurnal Teks lengkap
Nb-Cu metallic composite: SPS preparation, microstructure and mechanical properties
This study investigates the effects of milling time and sintering temperature on the properties of Nb-Cu, prepared by high-energy milling and spark plasma sintering (SPS). Xray Diffraction (XRD), laser scanning confocal microscopy and Scanning Electron Microscopy with Energy Dispersive Spectroscopy…
-
Artikel Jurnal Teks lengkap
Porous ceramic based on cost-effective natural zeolite and kaolin for removal of ammonium ions: Preparation, characterization and application
In this study, porous ceramics, based on available and cost-effective raw materials natural zeolite and kaolin clay, were synthesized and examined as an adsorbent for removing ammonium ($ NH^{4+} $) ions from aqueous solutions. The synthesis was carried out using the foaming method with the…
-
Artikel Jurnal Teks lengkap
Cavitation erosion of samples based on cordierite-talc ceramics
In the paper, the cavitation resistance of cordierite samples with the addition of 10%, 15% and 20% talc, sintered at 1200⁰ C, was investigated. The ultrasonic vibration method with a stationary sample according to the ASTM G32 standard was applied. The formation and development of damage to the…
-
Artikel Jurnal Teks lengkap
Synthesis and structural properties of europium-doped fluorapatite nanoparticles as a promising luminescent biomaterial
Europium-doped fluorapatite $\mathrm{Ca}_{10-x}(\mathrm{PO}_{4})_{6}\mathrm{F}_{2}:x\mathrm{Eu}^{3+}$ (x = 0.05, 0.1 and 0.5) nanoparticles were successfully synthesised by a coprecipitation method at room temperature and calcination at 700 ⁰C. Characterisation of samples using XRD, TEM, TGA-DTA…
-
Artikel Jurnal Teks lengkap
The influence of zinc content and sintering temperature on microstructure, hardness and corrosion potential of Mg-Zn-Ca alloy
Mg-Zn-Ca alloy, a material widely recognized for its potential as a biomaterial, has been the focus of our research. In this work, powder metallurgy was used to create three alloys with mass fractions: 89Mg–10Zn-1Ca, 93Mg–6Zn-1Ca, and 97Mg–2Zn-1Ca wt.%. Powders were mixed in the mentioned parts…
-
Artikel Jurnal Teks lengkap
Formation and characterization of magnetic $ \mathrm{CdFe_2O_4} $ nanoparticles
Cadmium ferrite nanoparticles ($ \mathrm{CdFe_2O_4} $ NPs) have been synthesized by impregnation method followed by heat treatment. Investigation the structural and morphogical properties of CdFe2O4 NPs was done using XRD, FTIR and TEM techniques. On the other hand, $ \mathrm{CdFe_2O_4} $ NPs'…
-
Artikel Jurnal Teks lengkap
Modeling the physical properties of mortar with the application of expanded vermiculite
This paper presents a laboratory study on the physical properties of mortar incorporating expanded vermiculite. The basic cement-lime mortar matrix remained unchanged, while the proportions of vermiculite were varied at 10%, 20%, and 30%. The research results demonstrated a significant improvement…
-
Artikel Jurnal Teks lengkap
Structural and morphological studies on yttrium-doped magnesium aluminate spinel powders synthesized by mixed-fuel solution combustion synthesis approach
The incorporation of yttrium ions into the structure of magnesium aluminate spinel can be an effective approach to modify its microstructure, enhancing its formation, sintering behavior, and mechanical properties. In this work, a mixed-fuel solution combustion synthesis approach was used to prepare…
-
Artikel Jurnal Teks lengkap
Comparative study on the tribological properties of direct metal laser sintered and conventionally manufactured Ti6Al4V alloys
The tribological behaviors of direct metal laser sintered materials should be further studied, as it is important to know their wear properties before use. In this research, the tribological properties of Ti6Al4V samples produced by conventional (rolling) and additive manufacturing methods using…
-
Artikel Jurnal Teks lengkap
Hardness, wear and thermal properties of SiC/carbon black-reinforced Al6061 matrix composites produced via powder metallurgy
In this study, carbon black (CB) obtained from the pyrolysis of waste tires was used as a reinforcement material. Al6061 alloy, widely utilized in the automotive industry, was selected as the matrix material, while silicon carbide (SiC) was employed as a secondary reinforcement. The study…
-
Artikel Jurnal Teks lengkap
Formation of $ \mathrm{WO_3} $ thin films from RF sputtered tungsten films by air annealing: A cost-effective approach
WO3 thin films were prepared by RF sputtering metallic tungsten onto glass substrates, followed by thermal oxidation through annealing in air. This technique is straightforward, cost-efficient, and time-effective, achieving high deposition rates of 16 nm/min on average at 200 W magnetron power for…
-
Artikel Jurnal Teks lengkap
Characterization and optical properties of cobalt-doped β-tricalcium phosphate nanoparticles: Microwave refluxing and high-temperature sintering
This study investigates the synthesis, characterization, and optical properties of cobalt-doped β-tricalcium phosphate (Co-βTCP) nanoparticles prepared via microwave refluxing and sintered at 1000°C for 2 hours. Incorporating $ Co^{2+} $ ions into the βTCP structure significantly influences its…
-
Artikel Jurnal Teks lengkap
Highly tough and hard zirconia-based composites derived from 3Y-TZP and 12Ce-TZP powders by co-doping approach
Due to their superior physical, chemical, and mechanical properties, 3 moles % yttrium stabilized tetragonal zirconia polycrystalline (3Y-TZP) ceramics are used in dental applications. However, the safe usage of 3Y-TZP is constrained in dental applications by low (or moderate) fracture toughness…
-
Artikel Jurnal Teks lengkap
Comparison between transport properties for $ \mathrm{H_2}^+ $ in $ \mathrm{H_2} $ and $ \mathrm{H_2}^+ $ in Ar gas
In this work we present a cross-sections dataset and transport properties of $ \mathrm{H_2}^+ $ in $ \mathrm{H_2} $ gas and $ \mathrm{H_2}^+ $ ions in Ar gas. The ionic charge transfer reactions with molecules are indispensable elementary processes in the modeling of kinetics in terrestrial…
-
Artikel Jurnal Teks lengkap
Kinetics of the crystallization process of ferromagnetic$ \mathrm{Fe_{65.5}Cr_4Mo_4Ga_4P_{12}C_5B_{5.5}} $ bulk metallic glass
Glassy rods of the multicomponent ferromagnetic $ \mathrm{Fe_{65.5}Cr_4Mo_4Ga_4P_{12}C_5B_{5.5}} $ alloy were prepared by copper-mold casting technique under a protective argon atmosphere with diameters of 1.5 mm and 1.8 mm. As-cast samples were examined by non-isothermal analysis (DSC and DTA) and…
-
Artikel Jurnal Teks lengkap
Analysis of the qualitative characteristics of polo shirts made of cotton and cotton/elastane single pike weave before, during and after 60 washing cycles with commercial detergents
The qualitative characteristics of T-shirts made of 100% cotton and 95% cotton and 5% elastane were investigated before and after 20, 40 and 60 cycles of washing with commercial detergents. The results of the experimental tests were approximated by a nonlinear model of data fitting, which is in the…
-
Artikel Jurnal Teks lengkap
Challenges and innovative solutions in fabrication of ceramic matrix composite for ultra high-temperature application
Ceramic Matrix Composites (CMCs) are transformational materials with outstanding thermal stability, mechanical strength, and resilience to severe conditions, making them important in aerospace, energy, and defence applications. This paper examines the novel approaches and problems of creating CMCs…
-
Artikel Jurnal Teks lengkap
Nanocomposite $ \mathrm{Cu_x}S $ on flexible polymers: Raman study
Flexible polymers modified with copper sulfides have emerged as a novel class of materials, presenting composite structures with remarkable properties suitable for applications in flexible electronics. This study focuses on the deposition of copper sulfide ($ \mathrm{Cu_x}S $) layers onto the…
-
Artikel Jurnal Teks lengkap
Microstructure and orientation - dependent fatigue performance of direct metal laser sintered maraging steel
The microstructure of maraging steel produced by direct metal laser sintering (DMLS) is influenced by various factors, including parameters of the DMLS process and post-treating methods. This study investigates the effect of build orientation on the microstructure and fatigue behaviour of M300…