3.278 hasil
Menampilkan 1–20 · 0,17 detik · RSS
Materiales de Construccion
Scopus
ISSN 0465-2746 · Consejo Superior de Investigaciones Científicas · 3.278 artikel di indeks
-
Artikel Jurnal
Orientation coefficient in ultra-high performance fiber reinforced concrete and its relationship with casting methods
Ultra-high-performance fiber-reinforced concrete (UHPFRC) exhibits outstanding mechanical and durability performance, strongly influenced by fiber orientation. This study evaluates the fiber orientation coefficient considering casting methods, element geometry, and thickness effects. Beams…
-
Artikel Jurnal
Effects of density and strength on dynamic modulus of elasticity for self-compacting rubberized concrete containing recycled brick aggregate
The aim of this study is to evaluate the mechanical properties of self-compacting concrete (SCC) containing two types of brick aggregate (discarded and demolition brick aggregate) with a 100% replacement of both fine and coarse natural aggregates, besides incorporation of 10% tire crumb rubber as a…
-
Artikel Jurnal
Self-healing behaviour of sustainable concretes with forest biomass ash and coal bottom ash aggregates under CO₂-saturated environments
This study investigates the autogenous self-healing behaviour of two concrete mixes: a reference concrete, and a sustainable ternary mix incorporating 25% forest biomass ash and 15% metakaolin as partial cement replacement, together with 30% porous fine aggregate from coal bottom ash. After…
-
Artikel Jurnal
Influence of interfacial transition zone on mechanical behavior of GGBS-modified concrete: experimental and numerical study
This study investigates the Interfacial Transition Zone’s (ITZ) influence on concrete’s mechanical behavior through testing and simulations. M20 and M60 grade concrete mixes were prepared with varying percentages of Ground Granulated Blast Furnace Slag (GGBS) as cement replacement. Compressive…
-
Artikel Jurnal
Comparative evaluation of laboratory and field compaction methods on the performance of pervious concrete
This study evaluates the influence of casting and compaction procedures on the mechanical and hydraulic performance of pervious concrete (PC) under laboratory and field conditions. Twelve laboratory procedures were assessed by combining three compaction methods (tamping rod, Proctor hammer, and…
-
Artikel Jurnal
Effects of different silica sources on rheological properties and 3D printability of magnesium-based cements
This research explores the usability of reactive MgO (RM)-based materials as sustainable, low-carbon alternative binders for 3D concrete printing. Specifically, RM was substituted with 25 wt% of diverse silica sources to assess their potential: micro-silica (MS), metakaolin (MK), fly ash (FA), and…
-
Artikel Jurnal
High-volume glass powder concrete as a sustainable and chloride-resistant alternative to fly ash
The use of supplementary cementitious materials (SCM) can enhance concrete durability. Fly ash (FA) has been used as SCM, especially in chloride-rich environments, but its availability is decreasing due to the closure of coal-fired power plants in EU countries such as Portugal. Glass powder (GP)…
-
Artikel Jurnal
Modelling the sensitivity of fresh state performance to the mix design of conventional and self-compacting concretes
The fresh and hardened state performance of conventional and self-compacting concrete (SCC) is affected by multiple factors. Supplementary cementitious materials (SCMs), chemical admixtures, the maximum aggregate size or the grading of aggregates influence how the mix is designed to specified…
-
Artikel Jurnal
Effect of sustained loading on the post-creep flexural behavior of cracked hybrid fiber-reinforced concrete
Extensive research on fiber-reinforced concrete (FRC) has led to a solid understanding of its structural behavior, enabling the development of design codes. Initially dominated by steel fibers, FRC has progressively incorporated macro synthetic fibers, particularly in Latin America, where it is…
-
Artikel Jurnal
Printability of stabilized solids for low cement consumption blocks
This paper investigates the use of sandy silt in 3D printing by stabilizing it with Portland cement and chemical additives (metakaolin and limestone filler). The goal is to make the soil compatible with the 3D printing process and ensure pumpability. The experimental program began with a reference…
-
Artikel Jurnal
Mechanical performance of a warm-mix asphalt using sodium silicate-modified asphalt and recycled concrete aggregate
The present study evaluated the mechanical performance of a warm-mix asphalt (WMA) by partially replacing the coarse fraction of natural aggregates (NA) with recycled concrete aggregates – RCA. To manufacture the WMA, a sodium silicate (SS) was used to modify and foam the asphalt cement (AC). SS is…
-
Artikel Jurnal
Alkaline activated concrete with recycled asphalt pavement aggregate
Geopolymer concrete is an eco-friendly alternative to cement concrete that reduces carbon emissions through the utilisation of industrial waste. This study enhances its sustainability by incorporating recycled asphalt pavement (RAP) aggregates as partial replacements for natural coarse aggregate at…
-
Artikel Jurnal
The effect of replacing aggregates with oyster shell powder on the performance of asphalt concrete
In response to the global trend towards achieving net zero emissions, various industries are actively promoting the circular economy. Central to this goal is the strategic utilization of alternative materials to replace virgin materials, thereby reducing carbon emissions during the production and…
-
Artikel Jurnal
Mechanical characterisation of 3D printed concrete masonry units with high aggregate and mineral addition content
The present study aims to expand the understanding of cementitious mixtures with low cement content and high levels of mineral additions and aggregates in order to assess their influence on the constructive characteristics of printing elements representative of structural masonry. The printing…
-
Artikel Jurnal
Strength, expansion and microstructural change of fly ash geopolymer mortars containing field Para rubber latex immersed in magnesium sulfate and sulfuric acid
Geopolymer mortar from fly ash (FA) and field Para rubber latex (FPRL) with alkaline activators was exposed to 5% magnesium sulfate and sulfuric acid for 90 days with compressive strength. Key parameters assessed include compressive strength, expansion, degradation products, and microstructural…
-
Artikel Jurnal
Impact of ZnO and TiO₂ on C-S-H composition and its correlation with antifungal properties in cement pastes
This study presents a self-cleaning cement incorporating zinc oxide and titanium dioxide nanoparticles, used alone or in combination. The objective is to develop high-performance materials suitable for different environments, inhibiting fungal growth while providing self-cleaning properties. In…
-
Artikel Jurnal
Analysis of the properties of concrete produced with solid waste from the washing of ready-mix concrete trucks
Concrete batching plants generate various types of waste, including residual slurry from the washing of ready-mix concrete trucks. This study aimed to analyze the mechanical properties of concrete produced with partial substitution (10%, 20%, and 30%) of the binder by the solid waste generated from…
-
Artikel Jurnal
Optimization of the clinker production process in a Spanish cement factory
With the aim of manufacturing a clinker that reduces the energy consumption in its grinding, without substantially modifying the behavior of the cement manufactured with it, a characterization methodology based on the Rietveld method has been developed. From this study we have deduced that one of…
-
Artikel Jurnal
Evaluation of particleboard with Pine wood particles using polyurethane resin and polyethylene terephthalate
The use of recycled polyethylene terephthalate (PET) with pine wood shavings was analyzed in the particleboard manufacture using hot-pressing. 160 °C was considered to avoid moisture build-up in the resin structure and polymer degradation and, property losses. 50% Pine with 40% PET and 10%…
Menampilkan maksimal 50 halaman. Persempit pencarian dengan filter untuk hasil yang lebih spesifik.