103 hasil
Menampilkan 1–20 · 0,08 detik · RSS
Advanced Composites Letters
ISSN 0963-6935 · SAGE Publishing · 103 artikel di indeks
-
Artikel Jurnal
Polycaprolactone/calcium sulfate whisker/barium titanate piezoelectric ternary composites for tissue reconstruction
The piezoelectric materials with excellent bioactivity have attracted more attentions recently and have broad potential applications in tissue engineering. In this article, the barium titanate (BT) particles were filled into the polycaprolactone (PCL)/calcium sulfate whisker (CSW) (15 wt%)…
-
Artikel Jurnal
The parametric instability improvement of fully anisotropic composite plates with embedded shape memory alloy
The parametric resonance or instability challenge in designing laminated composite is crucial in areas such as aeronautical and marine where structures experience dynamic loading. Shape memory alloy (SMA), a type of smart material, has been used to improve the structural behaviours of composite…
-
Artikel Jurnal
Compressive behavior and energy absorption capacity of unconstrained and constrained open-cell aluminum foams
In practical engineering applications, while the open-cell aluminum foam as crash absorber is filled to the hollow structures, its deformation occurs under constrained stress boundaries. The experimental work was conducted to examine the effect of radial constraints on the mechanical behavior of…
-
Artikel Jurnal
Microstructure and corrosion resistance of Al3(Zr, Ti)/Al composite prepared by powder metallurgy
In the automotive and aviation fields, the complex use environment is critical to the performance requirements of materials, the corrosion resistance of materials severely limits the service life of materials, and improving the corrosion resistance of materials is of great significance in…
-
Artikel Jurnal
The normal distribution fitting method for frequency distribution characteristics of peak arrival time of earthquake
The physical meaning of phase difference controls the occurrence time of peak values of triangular series, which can be abbreviated as peak arrival time. This article describes a method for deducing the correspondence between the energy distribution characteristics in the time domain and the peak…
-
Artikel Jurnal
Significance of tungsten disulfide on the mechanical and machining characteristics of phosphor bronze metal matrix composite
The phosphor bronze (PB) is widely preferred in various engineering applications due to its high strength, toughness, fine grain size, low coefficient of friction, and better corrosion resistance. The present work is to investigate the effect of tungsten disulfide (WS 2 ) solid lubricant particle…
-
Artikel Jurnal
Estimation of fastener pull-through resistance of composite laminates based on generalized regression neural network
The fastener pull-through resistance is a key performance index of composite laminates used for engineering application, and increasing research attention is being paid to developing methods for its calculation or estimation. The currently available research methods mainly focus on the standard…
-
Artikel Jurnal
Ballistic limit velocity of tungsten alloy spherical fragment penetrating Ti/AlTi-laminated composite target plates
To determine the ballistic limit velocity of titanium–titanium tri-aluminide (Ti/Al 3 Ti)-laminated composites under the action of tungsten alloy spherical fragments, a type of 12.7 mm ballistic gun loading system was used to test the tungsten alloy spherical fragments vertically impacting the…
-
Artikel Jurnal
Diffusion welding of stainless steel 304L/Monel K-500 composite materials produced with different methods
The stainless steel 304L (commercially supplied) and Monel K-500 that was prepared through cold pressing of metal matrix composite materials powder mixtures were joined by diffusion welding. Welding was performed under uniaxial compression using the 50 µm-thick nickel (Ni) and aluminum (Al) 2024…
-
Artikel Jurnal
Research on an electromagnetic device and pressuring force for measuring the depth of borehole while drilling the bone
A device for measuring the depth of the borehole base on the magnetic grid during orthopedic surgery is proposed in this article. It consists of a magnetic grid, winding sleeve, two Hall sensors, and control circuitry. The magnetic grid comprises permanent magnets and coil windings. The device…
-
Artikel Jurnal
Rice straw powder/polylactic acid biocomposites for three-dimensional printing
The research aim of this work was to understand the effects of the soil burial of rice straw on the morphology and properties of 3D-printed rice straw powder (RSP)/polylactic acid (PLA) biocomposites. The rice straw buried in the soil for various days was grounded and sieved into powder at 120…
-
Artikel Jurnal
Effect of toughened polyamide/carbon fiber interlace braid fabric on the mechanical performance of CFRP laminates
Delamination resistance and epoxy matrix brittle fracture have been the main issues in carbon/epoxy composites laminates. Various studies have been reported to complement the brittle fracture of epoxy matrix. Conventional methods of fabricating toughened carbon/epoxy composite laminates were…
-
Artikel Jurnal
Flower pollination-based optimal design of reinforced concrete beams with externally bonded of FRPS
The optimal design of reinforced concrete beams (RCBs) and structures with an objective of improving the chosen performances is an important problem in the field of construction works. Recently, the concrete beams, structures, and walls are strengthened externally by bonding fiber-reinforced…
-
Artikel Jurnal
Post-impact damage tolerance of natural fibre-reinforced sheet moulding compound
Natural fibre composites are of interest for a wide range of semi-structural applications in the building, construction and automotive sector. For a number of these applications, the evaluation of performance degradation after impact is of some relevance. The present work focused on the influence…
-
Artikel Jurnal
The influence of yarn fineness and number of yarn layers on in-plane shear properties of 3-D woven fabric
The 3-D layer-to-layer angle-interlock woven fabric (LLAIWF) has good deformability on a complicated contour, which offers them a large application potential in the field of aerospace. This article mainly focuses on the influence of yarn fineness and number of yarn layers on in-plane shear…
-
Artikel Jurnal
Effect of production temperature on thermal and mechanical properties of polystyrene–fly ash composites
This study was conducted to produce a novel construction material by using two different types of waste material consisting of fly ash and fragmented polypropylene (PP). These two materials were mixed on various ratios, and samples with smooth surface were obtained by compressing with 50 kg of…
-
Artikel Jurnal
Investigation into the microstructure and properties of wire arc additive manufactured 09MnNiDR steel
Cryogenic 09MnNiDR steel was prepared using arc additive manufacturing technology. Following manufacture, its phase composition, microstructure, and crystal structure were analyzed by spectrometer, X-ray diffraction, optical microscopy, scanning electron microscopy, and transmission electron…
-
Artikel Jurnal
Stress–strain relationship model of glulam bamboo under axial loading
Glulam bamboo has been preliminarily explored for use as a structural building material, and its stress–strain model under axial loading has a fundamental role in the analysis of bamboo components. To study the tension and compression behaviour of glulam bamboo, the bamboo scrimber and laminated…
-
Artikel Jurnal
Tool reliability of sintered diamond drill bit for processing silicon carbide ceramics based on Bayesian theory
Silicon carbide (SiC) ceramics, as a superhard nonmetallic material, would induce severe tool wear during drilling. To ensure the quality of processing, the drill bits must be replaced in advance before failure, which leads to serious waste without effective usage. Aiming at the tool reliability…
-
Artikel Jurnal
Mechanical and physical properties of teak leaves waste/polyurethane composites for particleboard application
A teak leaf waste/polyurethane composite has been made for particleboard application. Some fraction variations are performed on the use of polyurethane as a matrix with a range of 0.04–0.20 (w/w). Mechanical and physical properties have been tested on the composites produced. The test results…