468 hasil
Menampilkan 1–20 · 1,15 detik · RSS
Fenmo yejin jishu
Scopus
ISSN 1001-3784 · Editorial Office of Powder Metallurgy Technology · 468 artikel di indeks
-
Artikel Jurnal
Research progress on preparation methods, interface modification, and first-principles calculation of diamond/copper composites
Diamond/copper composites have the excellent thermal conductivity and the controllable thermal expansion coefficient, making them expected to become new generation of thermal management materials. However, the wettability between diamond and copper is poor, and the interface bonding of the prepared…
-
Artikel Jurnal
Effect of sintering process on microstructure and mechanical properties of W–Re alloys
The W–5.0Re–0.5HfC alloys were prepared by powder metallurgy, and the effects of three sintering processes on the microstructure and room-temperature mechanical properties of the alloys were systematically investigated, including hydrogen, vacuum, and vacuum+hydrogen sintering. The results indicate…
-
Artikel Jurnal
Research progress on ultra-high strength aluminum matrix composites
Aluminum matrix composites have the advantages of being lightweight, high-strength, and high-modulus, and have been widely applied in aerospace, shipbuilding, transportation, 3C electronics, and other fields. However, with the continuous development of science and technology, the existing aluminum…
-
Artikel Jurnal
Simultaneous improvement on mechanical and electrical properties of CNTs/Cu composites via introducing ex-situ interfacial WC by chemical vapor deposition
The nano-scale WC interface phases were pr-introduced on the surface of carbon nanotubes (WC@CNTs) by chemical vapor deposition using CH4 served as the C source and ammonium metatungstate served as the W source. Subsequently, the WC@CNTs reinforced copper matrix composites (WC@CNTs/Cu) were…
-
Artikel Jurnal
Effect of ultrasonic vibration on Nd-rich phase distribution in hot-deformed Nd–Fe–B magnets
To investigate the influence of ultrasonic vibration on the Nd-rich phase distribution in hot-deformed Nd–Fe–B magnets, the MQU-F type melt-spun powders were used to prepare hot-deformed Nd–Fe–B magnets through hot pressing and hot deformation processes with ultrasonic vibration applied during the…
-
Artikel Jurnal
Pressing and sintering process of A100 steels by powder metallurgy
Two types of A100 steel pre-alloyed powders with different particle sizes (1# small particle size powders and 2# large particle size powders) were selected, the styrene-butadiene rubber used as the forming agent was added, and the unidirectional pressing was carried out. The effects of…
-
Artikel Jurnal
Effect of La2O3 addition on microstructure and hardness of induction heating iron-based composite coatings
Using 45# steels as the base materials, the Fe–Ni–Cr–La2O3 composite coatings were deposited on the 45# steel surface by medium and high-frequency induction heating. The effects of La2O3 addition content (mass fraction) on the microstructure, element distribution, surface hardness, and…
-
Artikel Jurnal
Effect of Co and Mo content on mechanical properties of metal injection molding high alloy ultra-high strength steels
Based on the traditional martensitic aging steels, a new type of high alloy ultra-high strength steel powders (Fe–18.0Co–15.0Ni–8.0Mo–3.0Cr–0.5Cu–0.4Nb–0.4V–0.2Al) was designed by increasing the content of Co and Mo elements. The high alloy ultra-high strength steel powders were prepared by…
-
Artikel Jurnal
Fabrication and mechanical properties of gradient-structured W–Ni–Fe–Mo/Co tungsten heavy alloys
Gradient-structured tungsten heavy alloys with spatially graded mechanical properties can effectively resolve the strength-ductility trade-off in conventional homogeneous tungsten alloys. The high-strength 93W–Ni–Fe–Mo alloys and high-ductility 90W–Ni–Fe–Co alloys were separately developed through…
-
Artikel Jurnal
Effect of tungsten powder morphology on sintering microstructure and densification mechanism
The sintering microstructure and densification behavior of the spherical and irregular tungsten powders prepared by hot pressing (HP) and hot isostatic pressing (HIP) were systematically investigated. In the results, the irregular FW9 powders achieve the densification through coupled grain boundary…
-
Artikel Jurnal
Influence of manufacturing process on fundamental properties of NiCoCrAlY powders
NiCoCrAlY powders was prepared by plasma rotating electrode process (PREP), vacuum gas atomization (VGA) and agglomeration-sintering method (ASM), respectively. The particle size distribution, oxygen content (mass fracion), porosity, and particle shape of these three NiCoCrAlY powders were…
-
Artikel Jurnal
Effects of ultrasonic surface rolling process on microstructure and corrosion behavior of TC4 alloys manufactured by selective electron beam melting
TC4 alloys were manufactured by selective electron beam melting (SEBM) and subjected to ultrasonic surface rolling processing (USRP) in this study. The effects of USRP on the surface and microstructure of the alloys were investigated by optical microscopy, X-ray diffraction (XRD), and electron…
-
Artikel Jurnal
Influence of tungsten powder modification process on the rheological properties of feedstock and pore properties of porous tungsten matrix for barium-tungsten cathodes
The industrial reduced tungsten powders with the average particle size of 3~5 μm were modified by low-energy ball milling, airflow crushing, and radio frequency plasma spheroidization technology, respectively. The modified tungsten powders were used as the raw materials, and the metal powder…
-
Artikel Jurnal
Preparation method and properties of copper‒diamond composites
Addressing the current issues of insufficient thermal conductivity and low heat dissipation efficiency in electronic packaging materials, the copper‒diamond composites were prepared with three different methods, namely, traditional powder metallurgy (PM), stirring friction processing (FSP), and…
-
Artikel Jurnal
Effect of heat treatment on the microstructure and properties of Inconel 718 alloys prepared by hot isostatic pressing
Inconel 718 alloy ingots were fabricated by powder metallurgy hot isostatic pressing. Three kinds of heat treatments were carried out on the Inconel 718 alloy ingots, namely solution treatment (holding at 980 ℃ for 1 h and then quenching in water) + aging treatment (holding at 780 ℃ for 8 h and…
-
Artikel Jurnal
Effect of solution treatment on the microstructure and properties of UNS S32750 super duplex stainless steels prepared by selective laser melting
The ferritic stainless steels with the ultra-high strength and certain ductility were successfully prepared by selective laser melting (SLM), using the UNS S32750 duplex stainless steel spherical powders with the particle size of 15~53 μm prepared by electrode induction-melting gas atomization. The…
-
Artikel Jurnal
Research status and development of Ti(C,N)-based cermets
Ti(C,N)-based cermets have become the important candidate materials for the conventional and high-temperature structural components due to the excellent comprehensive properties. In recent years, the research on Ti(C,N)-based cermets has gradually shifted from the composition design and fabrication…
-
Artikel Jurnal
Research progress of high-entropy alloy catalysts assisted by patent information analyses
Based on the patent data for high-entropy alloy catalysts, the relationship between the patent application trend and technological life cycle, the target country and region, and the major research institution were analyzed in this study. The preparation techniques, application areas, and catalytic…
-
Artikel Jurnal
Research progress on microstructure and property optimization of high-entropy alloys fabricated by additive manufacturing
High-entropy alloys (HEAs) exhibit the outstanding properties, owing to the multi-principal-element design and high-entropy effects. Nevertheless, the conventional forming processes of HEAs fail to produce the complex shapes while maintaining the microstructural uniformity, hindering the industrial…
-
Artikel Jurnal
Research on the process of iron-based amorphous alloy composite coatings prepared by laser cladding
Fe-based amorphous alloy composite coatings were deposited on Q235 steel substrates via laser cladding. The influence of laser power on coating morphology, dilution rate, phase composition, microstructure, thermal stability, and mechanical response was systematically characterized by X-ray…