627 hasil
Menampilkan 1–20 · 0,12 detik · RSS
Весці Нацыянальнай акадэміі навук Беларусі: Серыя фізіка-тэхнічных навук
ISSN 1561-8358 · National Academy of Sciences of Belarus · 627 artikel di indeks
-
Artikel Jurnal
Iterative training of an automated dosimetric planning model for stereotactic radiotherapy in thoracic and lumbar spine pathologies
The study presents the results of applying an iterative approach to optimizing automated multi-criteria ionizing radiation dose distribution models for stereotactic spine radiotherapy. Two models were used: SRT_Vert_BM (Baseline Multicriteria Model) and SRT_Vert_IM (Iterative Multicriteria Model)…
-
Artikel Jurnal
The effect of model mineralized solution on diffusion of 137Cs and 85Sr in the clay from “Markovskoe” deposit when used in near-surface radioactive waste disposal
The migration of radionuclides 137Cs and 90Sr in a compacted clay sample from the “Markovskoye” deposit of the Gomel region depending on the mineralization of its pore solution has been studied by the in-diffusion method. Distilled water and model mineralized solution were added to clay; the…
-
Artikel Jurnal
Convective drying of thin wet heat-insulation materials
The method of calculation of the drying process of thin flat materials on the basis of the equation of drying kinetics, which establishes the relationship between the values determining the heat exchange by the heat transfer coefficient and moisture exchange by the relative drying rate, is…
-
Artikel Jurnal
Improvement of the process of precision fabrication of “square”-type microstructures using photolithography and electrochemistry
Currently microstructured heat exchangers are widely used in heat dissipation systems to increase the cooling intensity of high-power electronic components. They also hold promise for electromechanical sensors and microfluidic chips for laboratory-on-a-chip (LOC). This research aims to address key…
-
Artikel Jurnal
Effect of heat treatment modes on the structure and optical properties of silicon layers hyperdoped with selenium
Selenium hyperdoped silicon layers were obtained by Se ion implantation (3.1 · 1015 cm–2, 140 keV) followed by three types of isothermal heat treatment and using pulsed laser annealing (PLA, 70 ns, 2 J/cm2). Rutherford backscattering spectrometry (RBS) of He+ ions in random and channeled modes and…
-
Artikel Jurnal
Efficiency of processes for increasing surface quality in control led pulse modes of electrolyte-plasma treatment
To increase the efficiency of electrolyte-plasma treatment, modes based on the use of controlled pulses have been developed. The modes are implemented by alternating high-voltage pulses corresponding to the electrolytic-plasma area and current-free pauses between them. An increase in the efficiency…
-
Artikel Jurnal
Dependence of dispersion of low-expansion foam on the position in the foam layer by height
This paper presents a comprehensive analysis of structural models for low-expansion foams used in fire suppression systems. The cellular model, which occupies an intermediate position between spherical and polyhedral structures, was selected as the most adequate one, closely approximating real…
-
Artikel Jurnal
Statistical synthesis of a Bayesian algorithm image segmentation an d measurementof aerial object coordinates
This paper presents the results of a statistical synthesis of an algorithm for segmenting images of aerial objects based on the Bayesian criterion of maximum posterior probability. The key feature of the algorithm is the use of information about the operator’s initial choice of the object to form a…
-
Artikel Jurnal
Effect of the bands thickness on the profile of the roller in the two-roller method of fast hardening of the melt
A model is presented for the effect of the thickness of the crystallizer roll bandage on the roll profile in the tworoll method of rapid melt hardening. It is established that by changing the wall thickness of the roll band, the profile of the resulting strip can be adjusted. In addition, an…
-
Artikel Jurnal
Influence of high temperature thermal annealing on the structure, phase composition and resistive properties of films obtained by magnetron sputtering of a target of composition MoSi2 + 20 wt.% SiC
Thin films with a quasi-amorphous finely dispersed structure and a crystallite size of 1–3 nm were obtained using the magnetron sputtering method of a composite target of MoSi2 + 20 wt.% SiC compound. A study was conducted on the influence of temperature and duration of annealing on the surface…
-
Artikel Jurnal
Production of charcoal by pyrolysis of wood in the presence of an ultrahigh frequency electromagnetic field
Experimental equipment for producing charcoal from sawmill residues using thermochemical conversion of biomass in an oxygen-free environment has been developed. This equipment features thermal conversion of wood raw materials in a pyrolysis chamber equipped with microwave sources. The pyrolysis…
-
Artikel Jurnal
Influence of heat treatment on the structure and mechanical properties of carbon coatings doped with zirconium and silicon
The structural features and mechanical properties of composite carbon coatings formed from plasma flows of complex composition generated by pulsed electric arc and spark evaporation in the presence of molecular nitrogen were investigated. The nitrogen concentration in the coating was varied by…
-
Artikel Jurnal
Use of silicon photomultipliers in near-infractory visualizers
The feasibility of using silicon photomultipliers (SiPMs) in a visualizer for determining infrared laser power was assessed. The study subjects were the ON Semi FC 30035 p+–p–n+ silicon photomultipliers (SiPMs) manufactured in the USA. Such a device has a photosensitive surface area sufficient to…
-
Artikel Jurnal
The development of materials for electromagnetic protection and the investigation of electromagnetic in ter ference levels generated by the electric motor
The problem of electromagnetic ecology and its relevance for electric vehicles are considered. The effectiveness of electromagnetic shielding of new materials – multilayer structures of gradient and symmetrical type – has been studied, and the levels of electromagnetic fields generated by the…
-
Artikel Jurnal
Temperature monitoring of the molten bath in electron beam additive manufacturing using spectral thermography
This article presents a spectral thermography method for monitoring the spatial temperature distribution in the molten bath during additive manufacturing of metal parts, along with the experimental setup designed to implement this method. The approach is based on multispectral imaging across four…
-
Artikel Jurnal
Analysis of existing methods and additive technologies of 3D printing with polymer-ceramic materials
This article presents a comprehensive analysis of additive 3D printing technologies using polymer-ceramic composites (PCCs). Particular attention is paid to the advantages, limitations, and prospects of these materials use in medi cine, aerospace, and electronics. Additive manufacturing methods…
-
Artikel Jurnal
Regularities of formation of structure and properties of porous composites based on basalt fiber in the process of thermocycling
The results of studying the structure and properties of two compositions of porous composite materials of the CaO–MgO–FeO(Fe2O3)–Al2O3–SiO2 system based on basalt fiber formed during thermal cycling are presented. The samples made from the mixture of composition I had the following structure…
-
Artikel Jurnal
The use of new technologies in the construction and operation of prefabricated buildings with ultra-low energy consumption
This article provides a brief overview of new technologies developed for use in construction in cold regions of China. These technologies aim to significantly reduce environmental impacts, lower winter heating costs, and create comfortable living spaces during high summer temperatures. Chinese…
-
Artikel Jurnal
Assessment of the mine shaft guides stress-strain state under the elevator force impact caused by the dynamics of airflow motion
This study addresses the problem of contact interaction between the rollers of a mine hoist cage (elevator) and the guide conductors during the operation of a hoist system in a ventilation shaft, taking into account the dynamics of airflow. The influence of various operating modes of the…
-
Artikel Jurnal
Analysis of the dynamics of distribution of fission products and radionuclides under the containment of NPP-2006
The term “source” is defined in the article on the basis of international terminology as a value representing the physical and chemical form, as well as taking into account the time of release of fission products and other aerosols from core materials and concrete into the atmosphere of the primary…