Biblio Discovery — Demo Discovery Service

20 results

Showing 1–20 · 0.98 seconds · RSS

Journal

International Journal of Mechanical and Materials Engineering

ISSN 1823-0334 · SpringerOpen · 20 articles in the index

  1. Journal Article

    Cross bore size and wall thickness effects on elastic pressurised thick cylinders

    P. K. Nziu; L. M. Masu

    International Journal of Mechanical and Materials Engineering, Vol. 14 No. 1 · 2019 · English · DOAJ

    Abstract Three-dimensional finite element analyses were performed on closed-ended thick-walled cylinders with a radial cross bore under internal pressure. The aim of this study was to determine the behaviour of the hoop stress as well as to establish the optimal Stress Concentration Factors (SCF)…

  2. Journal Article

    Application of response surface methodology for prediction and modeling of surface roughness in ball end milling of OFHC copper

    Asiful H. Seikh; Biplab Baran Mandal; Amit Sarkar et al.

    International Journal of Mechanical and Materials Engineering, Vol. 14 No. 1 · 2019 · English · DOAJ

    Abstract This study was conducted to investigate the synergistic effects of cutting parameters on surface roughness in ball end milling of oxygen-free high conductivity (OFHC) copper and to determine a statistical model that can suitably correlate the experimental results. Firstly, an experimental…

  3. Journal Article

    Structural morphology and electronic conductivity of blended Nafion®-polyacrylonitrile/zirconium phosphate nanofibres

    R. Sigwadi; M. S. Dhlamini; T. Mokrani et al.

    International Journal of Mechanical and Materials Engineering, Vol. 14 No. 1 · 2019 · English · DOAJ

    Abstract This paper aimed to study the influence of zirconium phosphate (ZrP) nanoparticles on reducing the diameter of nanofibres during electrospinning. Addition of metal oxide such as zirconium phosphate decreases the diameter and smooths on the polyacrylonitrile (PAN) nanofibres as observed by…

  4. Journal Article

    Effect of cutting parameters on the dimensional accuracy and surface finish in the hard turning of MDN250 steel with cubic boron nitride tool, for developing a knowledged base expert system

    Sasan Yousefi; Mehdi Zohoor

    International Journal of Mechanical and Materials Engineering, Vol. 14 No. 1 · 2019 · English · DOAJ

    Abstract In the machining operations, final surface finish and dimensional accuracy are the most specified customer requirements. Hard turning machining operation using cubic boron nitride tool as an alternative of grinding process is a type of turning operation in which hardened steel are machined…

  5. Journal Article

    Sintering driving force of Al2O3 powders at the initial stage of pulse electric current sintering under thermoelastic diffusion

    Zhang Long; Zheng Heng-wei

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background The theoretical investigation of the rapid sintering mechanism under pulse electric current sintering has no unified understanding. Especially for non-conductive powder, since there is no current flowing directly through the powder materials, the driving force in the neck growth…

  6. Journal Article

    Simulated and experimental investigation of the airfoil contour forming of 301 austenitic stainless steel considering the springback

    Reza Bagheinia; Aazam Ghassemi

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background Metal forming has played a significant role in manufacturing development, thus investigations in the field of metal forming to improve the quality of the forming process are necessary. In the present study, the experimental and numerical analysis of airfoil contour forming of…

  7. Journal Article

    Stress-strain state of an elastic half-space with a cavity of arbitrary shape

    E. A. Kalentev

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background Analytical method for studying stress concentration around arbitrary shape cavity is proposed. Methods The method is based on the assumption that it is possible to simulate the influence of cavity on the redistribution of internal forces by including fictitious forces in the…

  8. Journal Article

    Establishing a simple and reliable method of measuring ductility of fine metal wire

    Shiori Gondo; Shinsuke Suzuki; Motoo Asakawa et al.

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background Measurement of the ductility like elongation and reduction of area of the fine metal wire is important because of the progress for the weight reduction and miniaturization of various products. This study established a simple and reliable method of measuring the ductility of a…

  9. Journal Article

    Hydrothermal analysis on MHD squeezing nanofluid flow in parallel plates by analytical method

    Kh. Hosseinzadeh; M. Alizadeh; D. D. Ganji

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background In this paper, the heat and mass transfer of MHD nanofluid squeezing flow between two parallel plates are investigated. In squeezing flows, a material is compressed between two parallel plates and then squeezed out radially. The significance of this study is the hydrothermal…

  10. Journal Article

    A new method to study free transverse vibration of the human lumbar spine as segmental multi-layer Timoshenko and Euler–Bernoulli beams

    H. Asgharzadeh Shirazi; M. Fakher; A. Asnafi et al.

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background The aim of this study is to propose a method for studying the free transverse vibration of the human lumbar spine using Timoshenko and Euler–Bernoulli beam theories. Methods The cross section of the lumber spine is assumed to be uniform, and the material properties are different…

  11. Journal Article

    Study of the sensitivity of high-strength cold-resistant shipbuilding steels to thermal cycle of arc welding

    Pavel Layus; Paul Kah; Elena Khlusova et al.

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background Structure and properties of welded joints of low-alloy thermomechanically processed (09G2FB) and quenched and tempered shipbuilding steels (10XN2MD, 08XN3MD, and 12XN3MF), welded with manual metal arc welding (MMA) and submerged arc welding (SAW), were studied. Methods Effects…

  12. Journal Article

    GA-based multi-objective optimization of active nonlinear quarter car suspension system—PID and fuzzy logic control

    Mahesh P. Nagarkar; Yogesh J. Bhalerao; Gahininath J. Vikhe Patil et al.

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background The primary function of a suspension system is to isolate the vehicle body from road irregularities thus providing the ride comfort and to support the vehicle and provide stability. The suspension system has to perform conflicting requirements; hence, a passive suspension system…

  13. Journal Article

    Flow and heat transfer of dusty hyperbolic tangent fluid over a stretching sheet in the presence of thermal radiation and magnetic field

    K. Ganesh Kumar; B. J. Gireesha; R. S. R. Gorla

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background This paper explores the impact of thermal radiation on boundary layer flow of dusty hyperbolic tangent fluid over a stretching sheet in the presence of magnetic field. The flow is generated by the action of two equal and opposite. A uniform magnetic field is imposed along the…

  14. Journal Article

    Taguchi-fuzzy multi-response optimization in fly cutting process and applying in the actual hobbing process

    Minh Tuan Ngo; Vi Hoang; Sinh Vinh Hoang

    International Journal of Mechanical and Materials Engineering, Vol. 13 No. 1 · 2018 · English · DOAJ

    Abstract Background Applying nanofluid made by adding alumina nanoparticles to industrial oil may reduce the cutting force, friction, and cutting temperature and, from that, improve the tool life in the hobbing process. However, it is difficult to set up the experiment for the actual gear hobbing…

  15. Journal Article

    Effect of nonlinear thermal radiation on double-diffusive mixed convection boundary layer flow of viscoelastic nanofluid over a stretching sheet

    K. Ganesh Kumar; B. J. Gireesha; S. Manjunatha et al.

    International Journal of Mechanical and Materials Engineering, Vol. 12 No. 1 · 2017 · English · DOAJ

    Abstract Background The present exploration deliberates the effect of nonlinear thermal radiation on double diffusive free convective boundary layer flow of a viscoelastic nanofluid over a stretching sheet. Fluid is assumed to be electrically conducting in the presence of applied magnetic field. In…

  16. Journal Article

    Non-contact experimental methods to characterise the response of a hyper-elastic membrane

    M. Kamper; A. Bekker

    International Journal of Mechanical and Materials Engineering, Vol. 12 No. 1 · 2017 · English · DOAJ

    Abstract Background Membranes often feature in dynamic structures. The design of such structures generally includes the evaluation of their dynamic characteristics, such as natural frequecies and mode shapes. Methods The quasi-statics ad dyamic responses of thin rubber sheeting were investigated…

  17. Journal Article

    Dynamic assessment of direct-current mobility in field-assisted sintered oxide dispersion-strengthened V-4Cr-4Ti alloys

    Vinoadh Kumar Krishnan; Kumaran Sinnaeruvadi

    International Journal of Mechanical and Materials Engineering, Vol. 12 No. 1 · 2017 · English · DOAJ

    Abstract Background Vanadium alloy is one of the potential candidate material for structural applications in a commercial fusion reactor. Extended survival of a structural material has a direct consequence on the net energy produced in a fusion reaction, it is important to develop ultra-functional…

  18. Journal Article

    Elastic waves in fractured rocks under periodic compression

    Elena L. Kossovich; Alexey V. Talonov; Viktoria L. Savatorova

    International Journal of Mechanical and Materials Engineering, Vol. 12 No. 1 · 2017 · English · DOAJ

    Abstract Background One of the current problems in studying the mechanical properties and behavior of structurally inhomogeneous media with cracks is the characterization of acoustic wave propagation. This is especially important in Geomechanics and prognosis of earthquakes. Methods In this work…

  19. Journal Article

    Effect of torch process on the steels used for bucket, shovel handle, and other high-tonne mining equipment

    H. Ochoa Medina; J. Leiva Yapur; O. Fornaro et al.

    International Journal of Mechanical and Materials Engineering, Vol. 12 No. 1 · 2017 · English · DOAJ

    Abstract Background The gouging torch process using air carbon arc cutting (CAC) device is a standard maintenance procedure carrying out in high-tonne equipment used in the minery industry. The application of this process could locally affect the mechanical properties and the microstructure in the…

  20. Journal Article

    A quasi-analytical solution of homogeneous extended surfaces heat diffusion equation

    Ernest Léontin Lemoubou; Hervé Thierry Tagne Kamdem

    International Journal of Mechanical and Materials Engineering, Vol. 12 No. 1 · 2017 · English · DOAJ

    Abstract Background In this study, a quasi-analytical solution for longitudinal fin and pin heat conduction problems is investigated. Methods The differential transform method, which is based on the Taylor series expansion, is adapted for the development of the solution. The proposed differential…