Biblio Discovery — Demo Discovery Service

104 hasil

Menampilkan 1–20 · 0,23 detik · RSS

Jurnal

Otopro, Pp 60-68 (2026)

ISSN 1858-411X · Mechanical Engineering Department Universitas Negeri Surabaya · 104 artikel di indeks

  1. Artikel Jurnal

    EXPERIMENTAL STUDY ON OTTO ENGINE PERFORMANCE WITH VARIATIONS IN COMPRESSION RATIO AND GASOLINE OCTANE

    Bahtiar Rahmat; Irwan Setyo Prabowo; Yuris Bahadur Wirawan dkk.

    Otopro, Pp 60-68 (2026) · 2026 · Indonesia · DOAJ

    This research aims to analyze the effect of compression ratio variation and gasoline octane number on the performance of spark-ignition internal combustion engines. The experimental object was a single-cylinder 124 cc motorcycle engine with an original compression ratio of 9.6:1. The compression…

  2. Artikel Jurnal

    EFFECT OF SECTION THICKNESS ON NODULAR GRAPHITE FORMATION AND MECHANICAL PROPERTIES OF DUCTILE CAST IRON

    Moch Chamim; Edi Sarwono; Haikal Haikal dkk.

    Otopro, Pp 43-50 (2026) · 2026 · Indonesia · DOAJ

    This study investigates the effect of section thickness on the microstructure and mechanical response of Ductile Cast Iron (DCI) using specimens with thicknesses of specimen 20, 40, and 60 mm. Optical microscopy reveals a ferrite-pearlite matrix with spherical graphite, where the graphite nodules…

  3. Artikel Jurnal

    DESIGN OF A LIFTER FOR HORIZONTAL CHAMBER MACHINE IN A LEAF SPRING PRODUCTION LINE: A CASE STUDY AT PT. XYZ

    Ahmad Saepuddin; Rachman Arya Syahputra

    Otopro, Pp 69-77 (2026) · 2026 · Indonesia · DOAJ

    PT. XYZ is an automotive manufacturing company that produces leaf springs. One of the machines used in the leaf spring forming process is a Horizontal Chamber Machine that works by pressing. In its operation, this machine requires a lifter to assist in the transfer of leaf springs and reduce the…

  4. Artikel Jurnal

    SIMULATION OF FATIGUE AND DEFORMATION OF CARBON FIBER DRONE PROPELLERS USING THE FINITE ELEMENT METHOD (FEM)

    Syaiful Arif

    Otopro, Pp 51-59 (2026) · 2026 · Indonesia · DOAJ

    This study analyses finite elements in the structural calculation of a drone propeller in carbon fiber with loads that represent live use. The output of this study evaluates the effect of load variations on deformation, stress distribution, and safety factors as key indicators of structural…

  5. Artikel Jurnal

    NUMERICAL INVESTIGATION OF REAR WINDSHIELD ANGLE AND REYNOLDS NUMBER EFFECTS ON THE AERODYNAMIC PERFORMANCE OF A SALOON CAR

    Dwi Tarti; Ika Nurjannah; Herman Sasongko

    Otopro, Pp 85-94 (2026) · 2026 · Indonesia · DOAJ

    This study examined how rear windshield angle and body geometry affect the aerodynamic behavior of a saloon car model using numerical simulations. Rear windshield angles of 45°, 60°, 75°, and 90° were considered for two configurations—sharp and rounded rear corners— whereas the front windshield…

  6. Artikel Jurnal

    EVALUATION OF INJECTION MOLDING PROCESS PARAMETERS ON THE QUALITY OF BRAKE FLUID RESERVOIR CAP PRODUCTS USING MOLDFLOW SIMULATION

    Adinda Rahmah Shalihah; Aditya Bagja Subarkah; Farras Novyansyah dkk.

    Otopro, Pp 78-84 (2026) · 2026 · Indonesia · DOAJ

    This study aims to analyze the effect of melt temperature and mold surface temperature variations on the quality of the motorcycle brake fluid reservoir cap using Autodesk Fusion simulation. Three parameter variations were applied: 260°C/80°C, 220°C/50°C, and 180°C/20°C, while other process…

  7. Artikel Jurnal

    PENGARUH KECEPATAN PENGELASAN MIG TERHADAP KEKUATAN TARIK DAN PERUBAHAN STRUKTUR PATAHAN MAKRO PADA SAMBUNGAN ALUMINIUM

    Kris Witono; Talifatim Machfuroh; Lisa Agustriyana dkk.

    Otopro, Pp 6-12 (2025) · 2025 · Indonesia · DOAJ

    MIG (Metal Inert Gas) welding is a welding process that uses rolled electrodes which are the same as the base metal and uses a protective gas. Aluminum is one of the most commonly used metals in the industrial world. Connecting aluminum by welding is a challenge in itself because of its high heat…

  8. Artikel Jurnal

    STUDI AERODINAMIKA KENDARAAN LISTRIK VU-EV DENGAN PENDEKATAN COMPUTATIONAL FLUID DYNAMICS (CFD)

    Imanuel Timotius Arifin; Ferly Isnomo Abdi; Aji Nugroho dkk.

    Otopro, Pp 22-29 (2025) · 2025 · Indonesia · DOAJ

    This research analyzes the aerodynamic characteristics of the VU-EV electric vehicle using Computational Fluid Dynamics (CFD) simulation. The study evaluates airflow patterns, pressure distribution, and wake formation at three speeds (20 km/h, 25 km/h, and 30 km/h), aiming to enhance the…

  9. Artikel Jurnal

    PENGARUH PENGGUNAAN OLI MINERAL, SEMI SINTETIK DAN FULL SINTETIK TERHADAP PENINGKATAN SUHU MESIN MOTOR 4 LANGKAH MANUAL BERKAPASITAS 125 CC

    Muhamad Ikmal Fawaz; Anggara Sukma Ardiyanta; Emdi Ramadana Putra

    Otopro, Pp 1-5 (2025) · 2025 · Indonesia · DOAJ

    This study aims to analyze the effect of mineral, semi-synthetic, and full-synthetic engine oils on temperature rise in a 125cc four-stroke motorcycle engine. A quantitative experimental method was applied using three lubricants: AHM MPX 1 (mineral), Mobil Super Moto (semi-synthetic), and AHM SPX 1…

  10. Artikel Jurnal

    DESIGN OF INTERNET OF THINGS (IOT) BASED BEARING MONITORING TOOL

    Yudi Siswanto; Agus Salim Opu; Ika Nurjannah dkk.

    Otopro, Pp 13-21 (2025) · 2025 · Indonesia · DOAJ

    Bearing failure is one of the main causes of operational disruptions in mechanical systems due to the lack of continuous condition monitoring. Early detection of vibration and temperature increases is essential to prevent downtime and reduce maintenance costs. This study aims to design and develop…

  11. Artikel Jurnal

    PERANCANGAN TABUNG REAKTOR DESTILASI MICROWAVE-ASSISTED HYDRO DISTILLATION SKALA INDUSTRI RUMAHAN

    Sabdha Purna Yudha; Dwi Setyorini; Achmad Qodim Syafaatullah

    Otopro, Pp 38-42 (2025) · 2025 · Indonesia · DOAJ

    This study presents an innovative design of a reactor vessel for Microwave-Assisted Hydro Distillation (MAHD), optimized for household-scale essential oil production. MAHD, as an energy-efficient alternative to conventional distillation methods, was applied through a newly designed reactor that…

  12. Artikel Jurnal

    PERANCANGAN CYLINDER CATCHPOT VACUUM INFUSION SEBAGAI MEDIA PEMBUAT KOMPOSIT SERAT KARBON

    Firman Yasa Utama; Mohammad Irfan; Annisa Kesy Garside dkk.

    Otopro, Pp 30-37 (2025) · 2025 · Indonesia · DOAJ

    The use of metal or steel in a variety of applications has begun to be replaced by Carbon Fiber Reinforced Polymer (CFRP). Some of the advantages of CFRP include mechanical strength almost equal to, and sometimes exceeding, that of metal materials. One innovation in the manufacture of carbon fibre…

  13. Artikel Jurnal

    ANALISA VARIASI UKURAN RUNNER SYSTEM DAN MELT TEMPERATURE TERHADAP FILL TIME, CONFIDENCE OF FILL DAN QUALITY PREDICTION

    Mario Sariski Dwi Ellianto; Midarto Dwi Wibowo; Kadex Widhy Wirakusuma

    Otopro, Pp 51-55 (2025) · 2025 · Indonesia · DOAJ

    The technology used in making plastic products is injection molding technology. In general, the products obtained are not of good quality, so simulations need to be carried out to determine the correct production process parameters. This research focuses on determining the effect of variations in…

  14. Artikel Jurnal

    PEMODELAN DINAMIKA FLUIDA PADA FUEL INJECTOR MOTOR BENSIN 4 LANGKAH

    Khambali Khambali; Intan Fadhilah; Moh Hartono dkk.

    Otopro, Pp 38-43 (2025) · 2025 · Indonesia · DOAJ

    This study aims to model fluid dynamics in the fuel injector of a four-stroke gasoline engine, with a focus on the relationship between fluid pressure and flow rate. The size of the fuel droplet is a key factor that affects combustion efficiency. Droplet size can be controlled through the…

  15. Artikel Jurnal

    PENGARUH JENIS ELEKTRODA TERHADAP SIFAT MEKANIK HASIL PENGELASAN SMAW MATERIAL BAJA ST 42

    I Putu Armika; I Nyoman Pasek Nugraha; Gede Widayana

    Otopro, Pp 56-61 (2025) · 2025 · Indonesia · DOAJ

    SMAW (Shield Metal Arc Welding) is an activity carried out in the joining process which has a metal base material. The purpose of the study was to analyze the tensile strength results, and to determine the microstructure of the strongest electrode. using three types of electrodes RB-26, RD-250 and…

  16. Artikel Jurnal

    KONSTRUKSI KOMPOR BRIKET BATUBARA UNTUK EFISIENSI INDUSTRI KECIL DAN MENENGAH

    Irfan Subiantoro; Ardhian Trilaksono; Ahmad Bazi Syarif

    Otopro, Pp 62-66 (2025) · 2025 · Indonesia · DOAJ

    Small and Medium Industry is an industry that operates in the field of processing raw materials into products that can increase sales value. In the industrial world, business actors are required to process raw materials in large quantities and can reduce costs to make them cheaper. Coal briquette…

  17. Artikel Jurnal

    PENGARUH DIAMETER NOZZLE DAN PANJANG CABLE TERHADAP CYCLE TIME PADA MESIN AUTOMATIC CABLE TERMINAL YANG DIMODIFIKASI

    Muhammad Ubaidillah; Agus Dani

    Otopro, Pp 67-73 (2025) · 2025 · Indonesia · DOAJ

    Automatic Cable Terminal Machine is an automatic machine used to cut and process electrical materials, this machine is used by automotive companies to make wiring harnesses. This machine is able to cut raw materials with high precision and optimal speed. In changing the nozzle this machine is…

  18. Artikel Jurnal

    ANALISIS PENGARUH PERBANDINGAN TIMING INJEKSI MENGGUNAKAN VARIASI BAHAN BAKAR PERTAMAX DAN ETANOL TERHADAP PERFORMA MOTOR MATIC 110CC

    Saiful Bahri; Arasy Fahruddin; Prantasi Harmi Tjahjanti dkk.

    Otopro, Pp 44-50 (2025) · 2025 · Indonesia · DOAJ

    The application of ethanol as an alternative fuel needs to be continuously studied to face the energy crisis and environmental crisis. This study aims to determine the comparison of injection timing using pertamax and ethanol variations on torque, power, and efficiency in a 110cc automatic…

  19. Artikel Jurnal

    ANALISA GETARAN POROS POMPA SENTRIFUGAL PADA SISTEM PENYAMBUNGAN KOPLING SABUK DENGAN VARIASI DIMENSI UKURAN TEBAL DAN LEBAR SABUK

    Aldo Can; Ikhwansyah Isranuri

    Otopro, Pp 24-30 (2024) · 2024 · Indonesia · DOAJ

    Pump machines at the Regional Drinking Water Company can pump and deliver drinking water to homes for the community's needs. But in reality, pumping machines are not always 100% able to convert electrical energy into motion energy. The remnants of wasted energy are Vibration. Vibration can damage…

  20. Artikel Jurnal

    THE EFFECT OF SHIELDING GAS ON SURFACE DEFECTS AND MECHANICAL PROPERTIES OF MATERIALS AFTER THE GMAW WELDING

    IGNB Catrawedarma; Azriel Alfito Dela Rosi; M. Abdul Wahid dkk.

    Otopro, Pp 17-23 (2024) · 2024 · Indonesia · DOAJ

    This research aims to analyze the strength and results of welded joints by testing non-destructive and destructive tests using CO2 and argon shielding gases. The type of welding used was gas metal arc welding with SS400 steel material. After welding, the material was tested using liquid penetrant…