Biblio Discovery — Demo Discovery Service

852 hasil

Menampilkan 1–20 · 1,02 detik · RSS

Jurnal

Tribology Online

Scopus

ISSN 1881-2198 · Japanese Society of Tribologists · 852 artikel di indeks

  1. Artikel Jurnal

    Theoretical Investigation of Design Guidelines for Scraped Textures for Guideways Using the Taper-Land-Taper Bearing Model

    Kyosuke Ono

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    Scraped textures have been applied to the slide guideways of machine tools to create fluid film lubrication. Recently, it was revealed that using lubricating oil with an acid phosphate ester additive can change solid friction in the mixed and boundary lubrication regimes to fluid friction. In a…

  2. Artikel Jurnal

    Effect of the Oxidation Products of Base Oil on the Dielectric Constant of Lubricating Oil

    Yuka Noda; Tomomi Honda; Tomohiko Kon dkk.

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    Oxidation of base oils leads to the formation of insoluble deposits, such as varnish and sludge, which can cause operational problems including control valve malfunction. Consequently, reliable condition monitoring of lubricating oils is of critical importance. This study aims to clarify the…

  3. Artikel Jurnal

    Clarification of Seizure Mechanism in Steel Treated with Nitrocarburizing, Sulphonitriding, and Oxynitriding

    Shunsuke Sasaki; Noritsugu Umehara; Takayuki Tokoroyama dkk.

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    In this study, the seizure resistance improvement mechanisms of nitrocarburizing, sulphonitriding, and oxynitriding were investigated to obtain design guidelines for further improving seizure resistance surface-treated steel. Roller-on-disk friction tests were conducted under high-temperature and…

  4. Artikel Jurnal

    Micropitting Performance of an e-Axle Fluid under High-Speed Forced Lubrication Using a Three-Roller Test

    Takuto Kunii; Kaisei Sato; Shinya Sasaki

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    The growing demand for greater efficiency in electric vehicles requires e-axle gears to operate at higher rotational speeds while maintaining durability. However, high-speed operation promotes lubricant scattering and viscosity reduction, creating severe lubrication conditions that accelerate…

  5. Artikel Jurnal

    Rolling Contact Fatigue Modelling with Corrosion in Rolling Bearings

    Guillermo Enrique Morales-Espejel

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    Rolling contact fatigue can be enhanced by corrosion affecting the running surfaces in rolling bearings. Corrosion can trigger different phenomena affecting rolling contact fatigue performance. The present author has published a modelling methodology based on spall propagation from initial…

  6. Artikel Jurnal

    Fatigue Wear Mechanisms of Carburized and Nitrocarburized Steels under Simulated e-Axle Conditions

    Hayato Monzen; Takuto Kunii; Kaisei Sato dkk.

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    To extend the driving range of electric vehicles (EVs), downsized e-axle systems require gears operating at high rotational speeds and sliding velocities. Under such severe rolling–sliding conditions, carburized steels are prone to fatigue wear, particularly pitting, due to friction-induced thermal…

  7. Artikel Jurnal

    Optical Investigation of Micro-Texture Performance Across the Transition from Conformal to Concentrated Contact

    Milan Omasta; Petr Šperka; Šárka Houdková dkk.

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    This study examines the impact of standard laser surface texturing on the tribological behavior of a conformal journal bearing with a large radial clearance. A common dimple pattern was applied to the shaft, and friction and lubricant film formation were evaluated across a wide range of speeds and…

  8. Artikel Jurnal

    Establishing a Method of Predicting Indentations in the Raceway of a Wheel Bearing Using a Combination of Ridge Regression and the Response Surface Method

    Hiroki Matsubuchi; Yuki Hasegawa; Yutaka Kaku dkk.

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    Wheel bearings are essential components that ensure smooth rotation during both straight-line driving and cornering. A catastrophic failure of wheel bearings can lead to serious vehicle damage or even personal injury. Therefore, wheel bearings must be designed with a high level of reliability and…

  9. Artikel Jurnal

    Friction Fade-Out in DLC Pivot Bearings under Hydrogen Environments Using a Flywheel-Type Tribotester

    Masataka Nosaka; Tomoaki Fujiwara; Yushi Morisaki dkk.

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    Friction fade‑out (FFO) is a remarkable superlubricity in which friction coefficients approach 10⁻⁴ when a catalytic ZrO₂ pin slides against a hydrogenated DLC film in an H₂ environment containing ppm‑level ethanol vapor. This study developed a flywheel‑type tribotester to investigate FFO in pivot…

  10. Artikel Jurnal

    Influence of Periodic Asperities on Viscoelastic Friction in Planar Sliding Contact

    Taisei Chiba; Toshiki Watanabe; Ken Nakano

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    In soft-materials friction, the roughness of rigid countersurfaces plays a significant role, since it affects the amplitude and frequency of internal strain. This study analyzes steady sliding friction between a planar Kelvin-Voigt viscoelastic foundation and a nominally flat rigid plate with…

  11. Artikel Jurnal

    Elastohydrodynamic Lubrication with Newtonian and Non-Newtonian Lubricant for Rough Contact Surfaces in Oscillatory Motion

    Mohamed Fahmy Abd Al-Samieh; Mohammed Shaheen

    Tribology Online, Vol. 21 No. 2 · 2026 · Inggris · DOAJ Scopus

    Analysis of transient elastohydrodynamic lubrication for wavy surface contact exposed to oscillatory entrainment velocity with a Newtonian and a non-Newtonian lubricant under various surface waviness parameters of the point contact problem are presented in this paper. A sinusoidal wave…

  12. Artikel Jurnal

    Low Friction Properties of ta-C:Ta Coating in Drilling of CFRP

    Kosuke Suzuki; Takayuki Tokoroyama; Riko Takita dkk.

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    In the aerospace industry, the increasing use of robot-assisted machining has led to a growing demand for drills with low cutting resistance. In this study, we investigated the cutting performance of tantalum-containing tetrahedral amorphous carbon (ta-C:Ta) coatings, which have been reported to…

  13. Artikel Jurnal

    Morphology and Formation Mechanism of Wear Debris in POM–Acrylic Resin Sliding Systems under Different Sliding Speeds

    Serina Tanaka; Hiroshi Kinoshita; Yoshiyuki Sugai dkk.

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Polyoxymethylene (POM) has excellent self-lubricating properties and is widely used in tribological applications. However, the mechanism of wear debris formation during polymer–polymer friction remains unclear. In this study, acrylic resin was employed as a transparent counter material to enable…

  14. Artikel Jurnal

    Non-Linear Dynamic Model and Analysis of Ball Bearing with Localized and Distributed Defects Considering Ball Slip Condition

    Ajay Kumar Verma; Parveen Kumar Saini; Sono Bhardawaj dkk.

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    This paper presents a 6 DOF nonlinear vibration model to analyse the vibration responses caused by a deep groove ball bearing having localized defect of 2 mm circular diameter and surface waviness (waviness amplitude = 50 μm and waviness orders = 9 and 20) on its races. The model includes the mass…

  15. Artikel Jurnal

    Friction Fade‑Out of DLC Films in Hydrogen Environments via Tribocatalytic Formation of sp¹‑Hybridized Polyenyne Tribofilms

    Masataka Nosaka; Hideaki Tokai; Yuuki Tokuta dkk.

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Friction fade‑out (FFO) is a superlubricity phenomenon observed when a catalytic ZrO₂ pin slides against a hydrogenated diamond‑like carbon (a‑C:H) film in H₂ environments containing alcohol vapor. FFO achieves ultralow friction coefficients near 10⁻⁴ under high loads (63.7 N, Pmax 2.6 GPa)…

  16. Artikel Jurnal

    A Chelyshkov Wavelet Operational Matrix Solution for the Rabinowitsch Fluid Model with Nanofluid Lubrication in Annular Squeeze Films

    Siddu Channabasappa Shiralashetti; Vatsala Nannivala Thippeswamy

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    The squeeze film reaction between parallel annular disks is fully theoretically treated in this research using a non-Newtonian Rabinowitsch fluid model enhanced by nanoparticle influences. The Chelyshkov Wavelet Operational Matrix Method (CWOMM) provides a quick and precise computer method for…

  17. Artikel Jurnal

    Scuffing Protection from PMA Adsorption Film

    Mao Ueda; Naoki Yamashita; Tomoko Hirayama dkk.

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Scuffing is becoming a common failure mode in gears and bearings. It has been shown that some polymethacrylates (PMAs) when used as additives can enhance the anti-scuffing performance of lubricants. This study has employed a step-sliding speed scuffing test to explore the ability of PMAs to prevent…

  18. Artikel Jurnal

    Effects of Lubricant Viscosity on Creep in Thrust Washers of Needle Roller Bearings

    Hiromichi Takemura; Taketoshi Chifu; Tetsuya Okumura

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    In recent years, there has been increasing demand in the fields of industrial equipment and automobiles for lighter and more compact units to save energy. The use of low-viscosity lubricant with high fluidity is known to reduce stirring resistance and decrease energy loss, delivering notable…

  19. Artikel Jurnal

    Smoothed Particle Hydrodynamics (SPH) Simulation to Analyze the Frictional Heat Generation and Plastic Flow of Al and Ti

    Akinori Fujita; Natsuko Sugimura; Hitoshi Washizu

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Seizure occurs when a sudden heat generation at the real contact surface, called the flash temperature, becomes the source point, raising the surrounding temperature and progressing plastic flow. In previous experimental studies, in-situ observations of the contact surface between metals have been…

  20. Artikel Jurnal

    Wear Characteristics and Tribofilm Formation Behavior of Carburized Hardened Steel Coated with Manganese Phosphate

    Ayumu Nagahashi; Masabumi Masuko; Keiji Matsumoto dkk.

    Tribology Online, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    This study investigates the MnPh surface treatment applied to improve the tribological properties of steel and rolling fatigue life of gears, focusing on the wear behavior and tribofilm formation during the initial sliding stage. The MnPh-coated layer is almost completely worn off in a short time…