369 hasil
Menampilkan 1–20 · 0,86 detik · RSS
Micro and Nano Engineering
Scopus
ISSN 2590-0072 · Elsevier · 369 artikel di indeks
-
Artikel Jurnal
Single-step resistless hardmask fabrication using selective surface oxidation
Electrolithography (ELG) is a unique case of local anodic oxidation (LAO) based lithography. ELG is performed by electrically stressing chromium (Cr) thin films, resulting in the formation of an oxide material which is a liquid material and spreads to over 100 μm within a few seconds. The rate of…
-
Artikel Jurnal
Electrode shading lithography: A new method to avoid side dissolution of adhesion layer during electrodeposition of platinum black
Electrochemical biosensors often rely on the detection of hydrogen peroxide (H₂O₂), produced upon enzymatic reaction, with platinum electrodes being a preferred choice due to their catalytic efficiency. A cost-effective alternative is the use of gold electrodes functionalised through the…
-
Artikel Jurnal
Process development to realize all-semiconductor InGaP-GaAs based photonic-crystal surface emitting lasers
Semiconductor lasers are the most efficient devices for light generation. The Photonic Crystal Surface Emitting Laser (PCSEL) is a type of semiconductor laser that uses a 2D photonic crystal (PC) structure acting as the lateral cavity. The 2D photonic crystals realized in this work consist of a 150…
-
Artikel Jurnal
Harnessing microarray projection patch technology for targeted agri-ceutical delivery
The precise delivery of agrochemicals with minimal environmental impact remains a major challenge in modern agriculture. Microarray Projection Patches (MAPs), inspired by their success in biomedical drug delivery, are emerging as a promising technology for the targeted administration of…
-
Artikel Jurnal
Accessible, high-resolution LCD lithography for microelectrode fabrication: Application to inkjet-printed PEDOT:PSS temperature sensors
In this work we present a cost-effective, accessible method for fabricating high-resolution patterns such as interdigitated electrodes (IDEs) using a consumer-grade Liquid Crystal Display resin (LCD) printer as an alternative to traditional photolithography. By leveraging the native 17 μm pixel…
-
Artikel Jurnal
Toolbox for fabricating biocompatible microstructured templates by molding soft materials
In vitro cell culturing is essential for evaluating therapeutics in preclinical drug development. However, standard 2D cultures are limited for mimicking in vivo conditions. Microstructured templates allow for better emulation of a complex in vivo environment for the cells. Even further…
-
Artikel Jurnal
A MEMSTENNA relay: Coupling a slot dipole antenna with a MEMS relay for wireless and batteryless switching control
This work presents the design and implementation of the MEMSTENNA relay, an innovative device that integrates a slot dipole antenna with a MEMS relay to enable wireless and batteryless switching control. The proposed concept exploits direct transduction from the electromagnetic to the mechanical…
-
Artikel Jurnal
Photoacid diffusion in chemically amplified photoresists and its detection methods: A review
Chemically amplified photoresists have been used in semiconductor lithography for more than four decades. These materials consist of an acid-sensitive polymer matrix and a small amount of photoacid generator, which decomposes upon exposure to radiation to produce strong acid, and other additives…
-
Artikel Jurnal
Gold nanostructures: A way for their assembling on flexible devices
This study presents the development of a gold nanoparticle island substrate deposited on a polydimethylsiloxane (PDMS) disk. Metal nanoparticles are known for their strong electromagnetic response when illuminated by incident light. In Raman analysis, this phenomenon leads to a significant signal…
-
Artikel Jurnal
Stress optimization in DC magnetron sputtered AlN layers for fully clamped bistable piezoelectric plate devices
In this paper, we demonstrate the fabrication and characterization of bistable piezoelectric plates with a precisely tuned residual stress to achieve buckling-induced bistability. The plate consist of a multilayered structure, with a piezoelectric aluminum nitride layer sandwiched between top and…
-
Artikel Jurnal
Exploring the diversity of antenna-based sensors: A comparative study of slot, dipole, electromagnetic band gap, and patch designs
This paper presents a comprehensive comparative review of four widely used antenna-based sensor designs: slot, dipole, electromagnetic band gap (EBG), and patch antennas, highlighting their roles in various sensor applications. These antennas offer advantages, such as compact size, high…
-
Artikel Jurnal
Laser interference lithography for ordered growth of nanowires in quantum bit development
Hybrid InAs–Al nanowires are essential building blocks for topological qubits, owing to their ability to host Majorana zero modes. In this work, we present a scalable method for fabricating ordered arrays of Au nanodots on GaAs(111)B substrates using laser interference lithography (LIL) in…
-
Artikel Jurnal
Low-thermal-budget fabrication of ZnO TFTs via urea-assisted combustion synthesis of high-k ZrO2 gate dielectrics
In this work, we present a low-temperature and cost-effective fabrication of zinc oxide (ZnO) based thin film transistors (TFTs) having high-k zirconium oxide (ZrO2) thin films as gate dielectrics. By employing a sol-gel approach combined with urea-assisted solution combustion synthesis (SCS), we…
-
Artikel Jurnal
Developing photo-catalytic mechanical polishing fluid for the chemical-mechanical polishing process of single-crystal silicon carbide
Silicon carbide (SiC) is not only notoriously difficult to finish by chemical mechanical polishing (CMP) owing to its ultrahigh hardness and chemical inertness, but it has also become the material of choice for a new generation of harsh-environment sensors—including deep-UV photodiodes…
-
Artikel Jurnal
Integrated UV/IR-cut optical filter with nanoimprinted pyramid diffuser featuring tailored light diffusion and hydrophobicity
This study presents the design, fabrication, and characterization of a UV/IR cut optical filter integrated with a surface diffuser featuring nanoimprinted pyramid structures, aimed at achieving uniform light distribution and minimizing angular sensitivity in optical systems. The key innovation lies…
-
Artikel Jurnal
Geometry-tuned inertial microfluidics for label-free enrichment of CTC-sized cells in serpentine microchannels
Circulating tumor cells (CTCs) are important biomarkers for metastatic progression, but their label-free enrichment from blood remains challenging because of their rarity, heterogeneity, and partial size overlap with hematologic cells. In this study, we present a serpentine inertial microfluidic…
-
Artikel Jurnal
All-dry stencil patterning of IGZO thin films with micrometer-scale resolution and electrical validation
Some substrate materials used in biodegradable and transient electronic systems require semiconductor fabrication routes that avoid high thermal budgets and liquid chemistries. Amorphous indium–gallium–zinc oxide (IGZO) is attractive for such platforms because it can be deposited by sputtering near…
-
Artikel Jurnal
Design and feasibility of strain FET based on TMD heterostructure
Electrostrictive materials and devices have been widely explored for information processing and storage devices. Electrostrictive field-effect transistor (E-FET) is an emerging steep-slope device concept which could allow low-power logic operations. However, E-FET has not been experimentally…
-
Artikel Jurnal
Effective mid-range correction for improving spatial gap uniformity in dense TLM structures on InP substrates
Accurate extraction of ultralow contact resistivity has become increasingly challenging for advanced InP-based device technologies, where specific contact resistivity values have already reached the low-10−8 Ω·cm2 regime. To improve the reliability of transmission line method (TLM) measurements…