328 hasil
Menampilkan 1–20 · 0,09 detik · RSS
Forces in Mechanics
Scopus
ISSN 2666-3597 · Elsevier · 328 artikel di indeks
-
Artikel Jurnal
Submodeling of roller–raceway contacts of large wind turbine slewing bearings with significant structural deformation
Roller bearings are commonly designed by using non-Hertzian submodels to simulate the roller–raceway contacts. The paper aims to analyze how to accurately model the roller–raceway contacts of a large wind turbine slewing bearing with significant structural deformation. To this end, a global FE…
-
Artikel Jurnal
Vibration analysis of a rotating FGM cracked beam under a tangent follower force
In the current study, we investigate the dynamic response of cracked rotating FG-beams with two variable boundary conditions. The crack is considered to be simulated by a massless torsional spring model. The beam motion equation is obtained based on Hamilton’s concept. In this study, a power-law…
-
Artikel Jurnal
Comparative numerical studies of the mechanical efficiency of sandwich-panels with different non-/auxetic prismatic and lattice cores subjected to ballistic loading
Civil as well as military facilities, vehicles and applications must increasingly meet higher safety standards to ensure the highest possible protection against extraordinary stresses such as ballistic and/or air-blast loading. The use of lightweight sandwich constructions is considered an…
-
Artikel Jurnal
Performance analysis of the multiwalled carbon nanotubes electroless coating over 7075-T6 aluminum specimens subjected to variable amplitude loading cases
The designs and improvements in the damage tolerance field for engineering constructions subjected to variable amplitude loading are crucial research topic in the modern technology. In the present work, the combined impact for nickel-multiwalled carbon nanotubes coating with the variable amplitude…
-
Artikel Jurnal
Experimental investigation of mechanical properties of hybrid sisal fiber and sheep wool reinforced epoxy composite material
Hybrid two or more fiber-reinforced composites are generally prepared to enhance different properties as compared to single-fiber reinforced composites. Sheep wool and sisal fibers are natural fibers that can be obtained from animal and plant sources respectively. After extracted and treated the…
-
Artikel Jurnal
Insight of thermal transport in Maxwell fluid flow on a porous contracting flat surface inside a porous material with non-uniform heat source/sink: Multiple solutions and stability treatment
The thermal behaviour of viscoelastic fluids, particularly those described by the Maxwell model capable of capturing stress-relaxation effects, exhibits several intriguing and practically relevant characteristics. Likewise, flow induced by a contracting surface presents distinctive and…
-
Artikel Jurnal
An improved Bayesian model updating framework using an enriched spring-based finite element model for structural health monitoring
Classical finite‐element model updating (FEMU) requires iterative updates of the structural model. Alternative approaches are often computationally expensive or oversimplify the actual physical behavior of the structures. This paper introduces a novel approach, an enriched spring-based Bayesian…
-
Artikel Jurnal
Effect of plate skew angle and crack parameters on buckling of cracked CNT-reinforced composite skew plates
The present study is the first to investigate the effect of plate skew angle and crack parameters on the buckling of cracked CNT-reinforced composite skew plates. A MATLAB code, developed within the extended finite element method (XFEM), analyzes the buckling stability of various cracked…
-
Artikel Jurnal
Experimental and numerical damage assessment of PLA based on young’s modulus reduction using the bonora damage model
The goal of this paper is to experimentally and numerically investigate damage evolution in PLA+ materials, based on the reduction of Young’s modulus during cyclic loading–unloading tests. Standard tensile specimens were fabricated via FDM 3D printing and tested under displacement-controlled cyclic…
-
Artikel Jurnal
Dynamic load localization and time history identification using blind source separation and structural modal shape matching
Accurate knowledge of dynamic load locations and time histories is a critical input for structural design but is often infeasible to measure directly. While numerous load identification methods exist, they predominantly address the localization and time-history reconstruction separately, relying on…
-
Artikel Jurnal
Analytical investigation of nonlinear response of single-walled carbon nanotube resting on elastic foundation subjected to casimir-electrostatic-van der waals forces
This paper presents analytical investigation into the nonlinear dynamic response of single-walled carbon nanotube (SWCNT) resting on elastic foundation and subjected to magneto-thermal and electrostatic environment under the influence of Casimir and intermolecular forces. The Euler-Bernoulli beam…
-
Artikel Jurnal
Chemomechanical modeling of lithiation-induced failure based on strain gradient plasticity theory
Porous silicon (Si) anodes in lithium-ion batteries (LIBs) experience significant diffusion-induced stress gradients during electrochemical cycling, leading to crack propagation and active material pulverization. To systematically predict such failure behaviors, this study proposes a…
-
Artikel Jurnal
Progressive study of water pressure-induced damage in hollow glass microsphere/epoxy resin composite materials based on the theory of elastic strain energy
The application of hollow glass microsphere/epoxy resin (HGMs/ER) composites is critical for deep-sea submersibles. This study proposes a progressive damage theory for HGMs/ER composites under hydrostatic pressure, based on elastic strain energy derived from self-consistent theory. We determined…
-
Artikel Jurnal
Optimal design and frequency tuning of a dual-folded piezoelectric harvester for leadless pacemaker applications
Leadless pacemakers require permanent power sources to support long-term operation and eliminate the need for replacement surgeries. This study introduces a dual-folded beam piezoelectric energy harvester (PEH) designed to harvest energy from heartbeat-induced vibrations for powering leadless…
-
Artikel Jurnal
Fatigue life analysis of aircraft hydraulic titanium-alloy tube considering the influence of forming process factors
Hydraulic systems are widely used in aircraft to achieve high-maneuverability flight actuation, rake actuation, as well as landing gear retraction and extension. As the important components of hydraulic system, hydraulic pipelines are distributed all over the aircraft. The total length of the…
-
Artikel Jurnal
Structure-property mapping and inverse design of an auxetic architected screw under mechanical loading
Auxetic architected solids provide an effective route for tailoring stiffness and transverse deformation through geometry rather than material composition alone. In screw-like structures, this capability is attractive because axial loading can be converted into lateral expansion, which modifies…
-
Artikel Jurnal
Transient dynamics of nonlocal beams with scale-dependent phase fractions
The transient bending response of Bernoulli–Euler nanobeams is investigated within the framework of two-phase strain-driven nonlocal integral elasticity. A central novelty of this study is the introduction of a physically motivated functional relationship between the nonlocal phase fraction and the…
-
Artikel Jurnal
A novel discrete mechanical model for static, stability, and free vibration analysis of tapered 2D-FGM portal frames
This paper presents a discrete mechanical formulation for the static, buckling, and free-vibration analyses of a tapered two-dimensional functionally graded material portal frame. The structure is composed of two columns and a top beam, whose cross-sectional dimensions may vary along the member…