145 hasil
Menampilkan 1–20 · 0,10 detik · RSS
Cement
ISSN 2666-5492 · Elsevier · 145 artikel di indeks
-
Artikel Jurnal
Recalcification of carbonated cement paste
Carbonation lowers the pH, leading to decalcification, shrinkage, and densification of the pore structure. Recalcification, the process of reintroducing calcium ions into decalcified cementitious materials, is a promising approach for restoring carbonated cement pastes. However, its impact on…
-
Artikel Jurnal
X-ray computed tomography to investigate steel corrosion in cementitious media: Experimental guidance, challenges and opportunities
X-ray computed tomography (XCT) provides unique opportunities to investigate steel corrosion in reinforced concrete, the primary degradation mechanism compromising infrastructure durability and safety. Its non-destructive nature, combined with high-resolution three-dimensional imaging and…
-
Artikel Jurnal
Production and properties of amorphous silica extracted from olivine for use as a supplementary cementitious material
Amorphous precipitated silica (APS) produced by acid leaching of olivine has been characterised and assessed for use as a supplementary cementitious material (SCM). The APS was thermally treated between 400 and 1000°C to modify its pore structure, surface area, composition and reactivity. Pastes…
-
Artikel Jurnal
Ability of a one-part granite-based geopolymer sealant to withstand exposure to CO2 with H2S or H2SO4 in the presence of H2O
The long-term integrity of wellbore sealants is critical for successful CO2 storage in geological reservoirs. This paper addresses the durability of a one-part, granite-based geopolymer (GP) sealant batch-exposed to CO2 and H2O, with or without H2S or H2SO4 for up to 16 weeks. Microstructural and…
-
Artikel Jurnal
Performance of a granite-based two-part geopolymer in hydrogen sulfide-rich environments: Implications for sour wells
The long-term stability of wellbore sealants is crucial for the success of oil and gas operations. This study evaluates the performance of a low-calcium, granite-based two-part geopolymer (GP) system under hydrogen sulfide (H2S)-rich brine exposure. GP samples were immersed in H2S-saturated…
-
Artikel Jurnal
Sustainable mortar production using volcanic ash and crushed laterite as partial cement replacements
Cement is a critical construction material globally and particularly in Ethiopia, where its production is energy-intensive, costly, and a major source of greenhouse gas emissions. This study explores the partial replacement of Portland cement with volcanic ash and crushed laterite powder in cement…
-
Artikel Jurnal
Assessment of ASR-induced development in concrete with natural and recycled reactive aggregates via resonant ultrasound spectroscopy coupled with imaging techniques
Numerous characterization techniques have been used to assess ASR-induced development (i.e., the formation of ASR products and cracks during expansion). Amongst those, scanning electron microscopy (SEM), coupled with energy dispersive X-ray spectroscopy (EDS), is a well-recognized technique…
-
Artikel Jurnal
Effects of supplementary cementitious materials on the freeze-thaw resistance and carbon footprint of blended cement concrete
Increased use of supplementary cementitious materials (SCMs) is limited by variability in their compositions and reactivities, since these factors significantly affect concrete properties and durability. Traditional durability testing is time-consuming, making it infeasible to apply widely to…
-
Artikel Jurnal
Optimising cement systems containing amorphous precipitated silica derived from olivine, limestone and gypsum
Amorphous precipitated silica (APS) derived from olivine has potential to be used as a pozzolanic supplementary cementitious material, but high specific surface area reduces mix workability, accelerates sulphate depletion and decreases early age strength. This study investigates the feasibility of…
-
Artikel Jurnal
Interaction of hydrated Portland slag cement with anionic dyes from textile wastewater
Hydrated cement pastes were evaluated as adsorbents for anionic dyes. Ordinary Portland cement (OPC) and pastes with 36–80 wt% ground-granulated blast-furnace slag were cured for 180 d, crushed (0.125–2 mm), and exposed to Reactive Blue 19 (RB19), Acid Orange 7 (AO7), and Acid Green 1 (AG1)…
-
Artikel Jurnal
Suitability of finely ground ladle furnace slag as a Portland cement replacement in blended cementitious binders
Ladle furnace (LF) slag, a by-product of the steelmaking industry, is rich in calcium and silicate phases, compatible with those present in Portland cement (PC); however, its potential suitability as a supplementary cementitious material is largely unknown. In this study, blended Portland mixes…
-
Artikel Jurnal
Polymer-stabilized hydrated calcium aluminate cement suspensions as calcium aluminate cement accelerator
Accelerating calcium aluminate cement (CAC) hydration is usually achieved using lithium salts. However, it is desirable to have alternative high-performance accelerators for CAC-based mortars and concretes. Here, we study the effect of polymer-stabilized hydrated calcium aluminate cement (hCAC)…
-
Artikel Jurnal
Condition assessment of pre-tensioning prestressed concrete sleepers distressed by internal swelling reactions (ISR)
Concrete sleepers worldwide have been affected by internal swelling reactions (ISR), primarily alkali-silica reaction (ASR) and internal sulfate attack (ISA). While numerous studies have focused on diagnosing ISR-affected sleepers, most emphasize identifying the cause rather than estimating the…
-
Artikel Jurnal
Hydration of portland cement and slag cement mixtures with insights on AFm phases and reaction mechanism
Hydration of Portland cement + slag blends with different slag replacements at various hydration times has been studied. Findings from QXRD, TGA, ESEM(EDS) & NMR have provided us with insights into the hydration mechanisms and phase assemblage of cement and slag mixtures. Phase assemblage and…
-
Artikel Jurnal
Enhancing efficiency in evaluating alkali-silica reaction (ASR) damage: an automated approach to point-count microscopy
The damage rating index (DRI) is a valuable microscopy tool for collecting and counting data on different types of concrete cracks, such as those associated with alkali-silica reaction (ASR) induced deterioration. Yet, the procedure presents drawbacks such as time consumption and variability linked…
-
Artikel Jurnal
Comparisons of quarry by-products as a partial replacement of portland cement in pastes and mortars
Quarry by-products (QB), including screenings, pond fines, and baghouse fines, present a significant surplus, since they are not significantly utilized in other markets and industries. This study explores the use of seven different QB as direct replacements of limestone powder in a portland…
-
Artikel Jurnal
Modelling and visualizing the impact of metakaolin on the alkali concentration in cement paste pore solution
This study investigates the effects of replacing Portland cement (PC) with metakaolin (MK) on the pore solution composition of cementitious binders. Using the empirical Taylor model and a thermodynamic model (GEMS), the required replacement levels of PC by MK are computed to achieve different…