Biblio Discovery — Demo Discovery Service

991 hasil

Menampilkan 1–20 · 0,35 detik · RSS

Jurnal

The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science

ISSN 2668-4748 · Galati University Press · 991 artikel di indeks

  1. Artikel Jurnal

    Temperature Effects on the Dimensions of CoCr Alloys: Dilatometric Study

    Mirabela Georgiana MINCIUNĂ; Petrică VIZUREANU

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 1 · 2026 · Inggris · DOAJ

    Cobalt-chromium (Co-Cr) alloys are widely employed in biomedical and dental applications due to their favourable mechanical properties, corrosion resistance, and thermal stability. This study investigates the effect of silicon (Si) addition on the chemical composition and dimensional behavior of…

  2. Artikel Jurnal

    Experimental Evaluation of Patterned Reflective Surfaces for Solar Glare Reduction in Small UAV Platforms

    Florin-Bogdan MARIN; Silvia Patricia PĂMÂNT; Mihaela MARIN

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 1 · 2026 · Inggris · DOAJ

    Small unmanned aerial vehicles (UAVs) increasingly require optical signature control in order to reduce visual detectability during daylight operations. This study investigates the influence of mirror-type polymer surface treatments on solar glare behavior and proposes a patterned reflective…

  3. Artikel Jurnal

    Additively Manufactured TPU Acoustic Metamaterials for High-Frequency Noise Mitigation in Dental Rotary Instruments

    Emilian CHIFOR; Florin-Bogdan MARIN; Mihaela MARIN

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 1 · 2026 · Inggris · DOAJ

    Noise generated by high-speed dental turbines represents a persistent challenge in dental clinics, affecting both patient comfort and the occupational well-being of medical staff. This study investigates the potential of additively manufactured thermoplastic polyurethane (TPU) acoustic…

  4. Artikel Jurnal

    Failure Case Study Series Part One: Analysis of Oxygen Compressor Shaft Breakage

    Liviu GURĂU; Carmela GURĂU; Gheorghe GURĂU

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 1 · 2026 · Inggris · DOAJ

    This paper presents the results of a failure analysis of an oxygen compressor shaft using seven basic steps. The findings of this work form the basis for corrective and preventive actions to enhance equipment reliability and prevent future recurrence. The paper also offers a simple and direct…

  5. Artikel Jurnal

    Buildings of the Future: Challenges or Opportunities?

    Simona STANCA

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 1 · 2026 · Inggris · DOAJ

    The accelerated evolution of technology, the pressures generated by climate change, and global socio-economic transformations have led to a profound reassessment of the way residential buildings are designed and used. This paper analyses the concept of "buildings of the future" from the perspective…

  6. Artikel Jurnal

    Structure–Morphology–Defect Relationships in CaTiO₃-Based Perovskites for Environmental Applications

    Adriana-Gabriela SCHIOPU; Florin CĂLIN-ISTRATE; Monica BÂLDEA dkk.

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 1 · 2026 · Inggris · DOAJ

    This review provides a comprehensive and critical analysis of the structure–morphology–defect relationships in CaTiO₃-based perovskites, with an emphasis on their environmental applications, particularly in water treatment and photocatalytic degradation processes. The paper systematically examines…

  7. Artikel Jurnal

    Analysis and Prognosis of Surface Subsidence in the Jiu Valley

    Dacian Paul MARIAN

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 1 · 2026 · Inggris · DOAJ

    Surface subsidence resulting from underground mining activities is a critical environmental and engineering concern that has garnered substantial attention in both academic and practical contexts. The phenomenon occurs when the removal of underground materials, such as coal, minerals, or ores…

  8. Artikel Jurnal

    End-of-Life Vehicle Recycling in the Context of the Circular Economy

    Lizica Simona PARASCHIV; Mihaela Alexandra GHEORGHICA; Spiru PARASCHIV

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    This paper synthesises, from an industrial engineering management perspective, the recycling of end-of-life vehicles (ELVs) within the European transition towards a circular economy. The study integrates three levels of analysis: the theoretical foundations of Life Cycle Assessment (LCA) under ISO…

  9. Artikel Jurnal

    Comparative Analysis of Metallic Oxides and Nanostructured Materials for Air Purification Applications

    Omar AHMED; Adriana-Gabriela SCHIOPU; Mihai OPROESCU

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    Air pollution represents one of the major environmental and public health challenges worldwide, generating an increasing demand for efficient air purification technologies. Nanostructured materials have attracted significant attention due to their high surface area, enhanced reactivity, and…

  10. Artikel Jurnal

    The Influence of Humidity on the Hardness of Acrylic Ocular Prostheses

    Antonia DINESCU; Beatrice TUDOR

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    The paper presents a study on the influence of humidity on the hardness of ocular prostheses made of acrylic material. To carry out this study, a determination of the hardness of the ocular prosthesis was made after immersion in artificial tears for seven weeks, performing several determinations of…

  11. Artikel Jurnal

    Assessment of Nutrients in the Danube River and Their Impact on Water Quality in the Brăila Sector

    Nicoleta CIOBOTARU

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    This study analyses the water quality of the Danube River in the Brăila sector by evaluating key nutrients and relevant physicochemical parameters. The concentrations of nitrogen compounds (nitrates, nitrites, ammonium) and phosphorus compounds (phosphates) were determined, along with parameters…

  12. Artikel Jurnal

    CAD/CAE Workflow for the Topology Optimization and Geometric Reconstruction of a Structural Component

    Florin-Bogdan MARIN; Mihaela MARIN

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    This paper presents a study on the topological optimization of a structural component and the conversion of the optimized result into a manufacturable geometric model. The initial model was developed in a CAD environment and imported into the finite element analysis software, where boundary…

  13. Artikel Jurnal

    Studies and Research on the Influence of Cleaning Products on the Surface Quality of Ocular Prostheses

    Antonia DINESCU; Beatrice TUDOR

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    The paper presents a study on the influence of different cleaning products on the quality of ocular prostheses. For cleaning, tap water, still water, chlorhexidine and artificial tears were used. The pH of the cleaning solutions was determined and a microscopic analysis of the surface of the…

  14. Artikel Jurnal

    Studies and Research on the Corrosion Behavior in K2SO4 of Some Laser Deposited Coatings

    Simona BOICIUC

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    The paper presents a series of experimental investigations regarding the corrosion behavior in a K2SO4 – 0.5M solution of laser-deposited layers using a Ni-Cr-B-Fe-Al alloy, compared to the substrate material made of 1C45 steel. Corrosion resistance can be influenced by the deposition parameters…

  15. Artikel Jurnal

    The Impact of Atmospheric Pollution Generated by Internal Combustion Engines on Human Health

    Mariana LUPCHIAN

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 3 · 2026 · Inggris · DOAJ

    This paper addresses the issue of emissions generated by vehicle engines and their impact on human health. The study aims to analyse the levels of major pollutants resulting from fuel combustion, such as carbon monoxide, nitrogen oxides, hydrocarbons, and particulate matter. The analysis emphasizes…

  16. Artikel Jurnal

    Fracture Behavior of Dissimilar Resistance Spot Welded Overlap Joint

    Abdelkader BENYOUCEF; Mustapha BENACHOUR; Nadjia BENACHOUR dkk.

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 2 · 2026 · Inggris · DOAJ

    The resistance spot welding process is also used for the welding of dissimilar materials. A dissimilar join is formed by two sheets: a 1.0 mm thick sheet of lowalloy carbon steel and a 1.5 mm thick sheet of aluminium alloy 6061 T6. In this study, the effects of welding current and nugget diameter…

  17. Artikel Jurnal

    Failure Case Study Series Part Three: Investigation of Wear and Failure Mechanisms in Heavy-Duty Gear Coupling

    Liviu GURĂU; Florin MARIN; Mihaela MARIN dkk.

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 2 · 2026 · Inggris · DOAJ

    This paper investigates the failure mechanisms of the gear teeth in a heavyduty coupling, emphasizing the combined effects of mechanical loading, metallurgical microstructure, and tribological wear mechanisms. Detailed characterization using optical microscopy (OM), scanning electron microscopy…

  18. Artikel Jurnal

    Deep Learning-Based Camouflage Detection for Anti-Personnel Mine Identification in Natural Environments

    Florin-Bogdan MARIN; Mihaela MARIN

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 2 · 2026 · Inggris · DOAJ

    The detection of anti-personnel mines in natural environments remains a critical humanitarian and technological challenge due to the high visual similarity between explosive devices and their surrounding backgrounds. This study presents a deep learning-based camouflage detection framework for the…

  19. Artikel Jurnal

    Simulation of the Mechanical Stress Behavior in the Case of the Damascus Steel After Heat Treatments for Improvement

    Carmen-Penelopi PAPADATU

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 2 · 2026 · Inggris · DOAJ

    The paper aims to study the behavior of Damascus steel at a maximum admissible load with a force of 250 N. Previous studies considered lower loading force values that did not produce cracks in the material. The processing of the samples and laboratory tests were carried out on specimens of Damascus…

  20. Artikel Jurnal

    Failure Case Study Series Part Two: Failure Analysis of Roller Guides in a Wire Rod Rolling Mill

    Liviu GURĂU; Florin MARIN; Mihaela MARIN dkk.

    The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and…, Vol. 49 No. 2 · 2026 · Inggris · DOAJ

    The paper aims to present the root cause of failure of roller guides from the wire rod and coil rolling mill during normal operation. A comprehensive failure investigation was conducted following standard metallurgical procedures, including visual inspection, hardness testing, chemical analysis…