Biblio Discovery — Demo Discovery Service

100 hasil

Menampilkan 1–20 · 0,27 detik · RSS

Jurnal

European Journal of Materials

Scopus

ISSN 2688-9277 · Taylor & Francis Group · 100 artikel di indeks

  1. Artikel Jurnal

    Eco-engineered prosopis juliflora biochar–reinforced recycled polypropylene biocomposites for enhanced mechanical and thermal performance

    Yoganandam K; Anni Shayana S; Deepak Kohli dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Escalating environmental concerns associated with plastic waste accumulation and the unchecked spread of invasive biomass species have intensified the pursuit of sustainable, high-performance materials. This study presents the fabrication and characterization of eco-engineered Prosopis juliflora…

  2. Artikel Jurnal

    Influence of the feedstock-viscosity on photolithography-based metal manufacturing – predict printability threshold

    Alexander Holzer; Simon Pfeifenberger; György Harakály dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    In contrast to direct metal additive manufacturing techniques, the crucial component for photolithography-based metal manufacturing is the binder itself. In the end, complete removal of the binder is important to reach final part characteristics, and a low shrinkage pushes to high loadings…

  3. Artikel Jurnal

    Investigation of multi-stage desalination using a passive solar-driven membrane (PSDM) system: a critical analysis for unserved and underserved areas (UUA) in the Philippines

    Rhys John D. Pacio; Karl June T. Paredes; Mark Cassius E. Pacheco dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    The utilization of alternative and sustainable desalination methods geared towards geographically isolated and disadvantaged areas is gaining attention. The Passive Solar Driven Membrane (PSDM) desalination system, which relies on thermal and membrane processes, possesses key advantages to…

  4. Artikel Jurnal

    Evaluation of the influence of fibre extraction processes and spinning parameters on the mechanical and hygroscopic performance of sisal yarns for engineering applications

    Anne-Marie Ndzie Bidima; Thierry Timothée Odi Enyegue; Remy Legrand Ndoumou Belinga dkk.

    European Journal of Materials, Pp 1-17 (2026) · 2026 · Inggris · DOAJ Scopus

    This study analyses the impact of three sisal fibre extraction processes mechanical decortication (FD), retting (FR), and manual scraping (FG) as well as linear mass (0.01-0.06 g) and unit twist (5-50 tpm) on the mechanical and hygroscopic properties of sisal yarns. Yarns were produced using the…

  5. Artikel Jurnal

    Mitigating the hardness loss due to divorced eutectoid transformation in pearlitic steels: Influence of the cooling rate and austenitization temperature

    Oleksandr Glushko; Jens Jarnot; Clement Vincely dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Divorced eutectoid transformation (DET) in pearlitic steels results in spheroidized cementite morphology instead of characteristic lamellar structure of pearlite. In case of welding, spheroidized areas in the heat-affected zone exhibit significantly lower hardness than surrounding pearlite…

  6. Artikel Jurnal

    Rapid sintering of 1.5 mol% yttria stabilized 3D-printed zirconia

    Tobias Prötsch; Anna Lebhard; Patrick Grabler dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    The widely use of 3 mol% yttria stabilized zirconia (3YSZ) in technical applications is driven by the toughening effect provided by the tetragonal to monoclinic phase transformation during mechanical loading. Additive manufacturing has extended its use towards complex geometries, such as dental…

  7. Artikel Jurnal

    Adapting an in situ X-ray CT compression stage for pull-out testing: Methodological development and characterization of failure evolution in Ni/PU hybrid foams

    Jonas Fell; Hendrik Jost; Dionne Schnubel dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    The integration of metallic fasteners into cellular hybrid materials presents significant challenges regarding interface integrity and localized load transfer. This study is exploratory in nature, focusing on the methodological development and evaluation of a custom-engineered in situ pull-out…

  8. Artikel Jurnal

    Machine learning prediction of magnetic properties for Fe-based and Pt-based alloys

    Svitlana Ponomarova; Oleksandr Ponomarov; Yurii Koval

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    There are two approaches to getting the Curie/Néel temperature: the classical one is to prepare an alloy of a certain composition and measure its temperature by experimental methods. In contrast, another approach is to predict the magnetic properties ahead of the experiment based on the physical…

  9. Artikel Jurnal

    Generative Adversarial Networks (GANs)-based timeseries data augmentation to overcome data scarcity in the context of material testing

    Sanghyun Yoo; Amal Viswakumar; Mathieu Vinot dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Data scarcity is one of the major challenges in applying machine learning, as acquiring training data on the material behaviour is often difficult due to high costs and time constraints. To address this challenge, this study reports the development of a robust data augmentation method based on…

  10. Artikel Jurnal

    Simulation of steel plate response undergoing differential cooling with air and water impinging jets

    Pavel Romanov; Getiye Gebeyaw; Arvid Jahedi dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Differential cooling is successfully used in automobile industry to obtain tailored mechanical properties along the thin-walled beams using tool or spray quenching. Thicker steel plates used for soil-working tools in agriculture require high hardness, and therefore, are hardened in water. However…

  11. Artikel Jurnal

    Performance evaluation of acrylic additives and process parameters in freeze granulation for advanced alumina powder processing

    Ismaïl M’Barki; Fabrice Rossignol; Anne Aimable dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Freeze granulation is an effective method for producing homogeneous and spherical ceramic granules, although its efficiency depends strongly on the formulation and processing conditions of the initial suspension. In this study, the performance of selected DURAMAX™ Acrylic Additives from The Dow…

  12. Artikel Jurnal

    A sequential evaluation workflow for early‑stage screening of outdoor electrical insulation polymer-based materials: A comparative case study

    Athanasios Milionis; Andres Leal-Ayala; Patrick Meier dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Polymer‑based outdoor electrical insulation materials are subjected to combined environmental and electrical stresses. Such stresses progressively influence material properties such as surface wettability, tracking and erosion resistance, UV stability, flammability, and dielectric performance…

  13. Artikel Jurnal

    Determination of the erosion resistance of pyrodensified, silicified and carbonized carbon-carbon composite materials in high-energy gas flows

    Viktor Skachkov; Hanna Karpenko; Oleksii Hrechanyi dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    In this work, we conducted experimental studies on the erosion resistance of pyrodensified, silicified and carbonized carbon-carbon composite materials in high-energy gas flows. Tests were performed in different modes of oxidizing and reducing flames using a specially designed unit that allows us…

  14. Artikel Jurnal

    Phosphorus embrittlement in austenite during heat treatment of a medium-manganese steel

    Daniel David; Reinhold Schneider; Gerald Klösch dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Heat treatment experiments of an air-hardening medium-manganese steel show that an increase in the austenitising temperature, despite increasing the grain size, leads to better toughness values after quenching. Furthermore, the influence of the austenitising temperature on toughness is reduced at…

  15. Artikel Jurnal

    Photoluminescence properties of CuO/ZnO composite powders as a function of their composition

    Thanit Tangcharoen

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Nanocrystalline CuO/ZnO composite powders with CuO:ZnO molar ratios of 100:0, 98:2, 92:8, 60:40, 40:60, 8:92, 2:98, and 0:100 were synthesized by the sol–gel auto combustion method using DEA as fuel and subsequently calcined at 1000 °C for 4 h. The structural, morphological, compositional, local…

  16. Artikel Jurnal

    Al–Mg–Zn–(Cu) Crossover Alloy for Powder Bed Fusion – Laser Beam/Metal: Processing–Microstructure–Property Relationships

    Andreas Weidinger; Dmitri Riabov; Sebastian Samberger dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Additive manufacturing expands the processing space for aluminium alloys beyond conventional routes. Emerging Al–Mg–Zn–(Cu) alloys depict a promising alternative for automotive and aviation applications. In addition to that, the exceptional irradiation stability of T‑phase precipitates makes them…

  17. Artikel Jurnal

    On the spatial variation of the mechanical properties of ductile iron castings with non-uniform geometry

    Rodger Romero Ramirez; Magnus Wessen; Peter Skoglund dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    This study investigates the influence of non-uniform geometry on the local cooling conditions, microstructural evolution and static mechanical properties of ductile iron EN-GJS-500-7 castings, using the triangular section of a standardized Type III Y-block casting as a representative geometry. A…

  18. Artikel Jurnal

    Analysis of the main constituents in the phases of tungsten heavy alloys

    Stefan Marschnigg; Christian Gierl-Mayer; Christopher Herzig dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    Tungsten heavy alloys are liquid phase sintered two-phase materials in which tungsten grains are embedded in an austenitic Ni-base matrix. While the solubility of W in the binder is high, the solubility of the binder elements in the W phase is very low. Analysis of the binder phase is challenging…

  19. Artikel Jurnal

    X-ray diffraction for characterization of materials in nuclear industry

    Claudia Aparicio; Oksana Nechypor; Patricie Halodová dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    X-ray diffraction (XRD) is a useful and affordable technique for studying various kinds of materials, providing valuable information about their crystal structure and phase composition. Using this technique, we can monitor changes in the structure due to irradiation, which prove useful to study…

  20. Artikel Jurnal

    Green extraction of chitosan from pinctada maxima shells: Comprehensive physicochemical properties and antibacterial performance for biomedical applications

    Susi Rahayu; Dionysius J. D. H. Santjojo; Rahadi Wirawan dkk.

    European Journal of Materials, Vol. 6 No. 1 · 2026 · Inggris · DOAJ Scopus

    The growing demand for eco-friendly biomaterials with sustained bacterial activity highlights chitosan as a promising medical material, yet conventional extraction often yields inconsistent quality. This research established a sustainable extraction route by varying isolation sequence, NaOH…