Biblio Discovery — Demo Discovery Service

53 hasil

Menampilkan 1–20 · 0,94 detik · RSS

Jurnal

Low-Carbon Materials and Green Construction

Scopus

ISSN 2731-6319 · Springer · 53 artikel di indeks

  1. Artikel Jurnal

    Investigation of the effect of growth ring orientation on the shear properties of sawn timber

    Zilu Zheng; Yifei Zhao; Guijuan Hu dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract This study investigates the influence of growth ring orientation on the shear behavior of engineered timber, with the objective of improving the structural performance and optimizing the design of cross-laminated timber. Four groups of spruce-pine-fir samples with different growth ring…

  2. Artikel Jurnal

    Impact of carbonation and fiber hornification on the performance of fiber-cements

    Julian Eduardo Mejia-Ballesteros; Holmer Savastano; Juliano Fiorelli dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract The present study evaluates the effect and advantages of the combined use of two treatments on fiber-cement composites: 1) accelerated carbonation on the cement matrix and 2) hornification of commercially used unbleached pine pulp (Pinus radiata D. Don). The premise of the study was to…

  3. Artikel Jurnal

    Study on the shear failure characteristics of RAC push-off specimens with UHPC shear keys

    Chang Sun; Haiye Zhao; Xu Wu dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract This study investigates the damage modes and cracks development patterns of recycled aggregate concrete (RAC) and ultra-high-performance concrete (UHPC) push-off specimens under direct shear. The experimental results reveal three distinct damage modes for specimens with varying numbers of…

  4. Artikel Jurnal

    Hybrid 3D printable mixtures incorporating fine earth, Portland cement, and fly ash: a sustainable alternative to cement-intensive systems

    Matheus Pimentel Tinoco; Rayane de Lima Moura Paiva; Luiza Draeger de Andrade dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract 3D printing offers efficiency and design flexibility in construction, but its sustainability is limited by the carbon footprint of cement-based materials. In this sense, the present study proposes hybrid printable matrices with Portland cement (30%–50%), fine earth (50%–70%), and fly ash…

  5. Artikel Jurnal

    Analyzing the impact of fiber-reinforced recycled ceramic waste concrete on carbon emissions and mechanical performance: a systematic review

    Yuzheng Geng; Yongcheng Ji; Dayang Wang dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract This study systematically reviews the utilization of fiber-reinforced recycled ceramic waste concrete, focusing on its mechanical performance and environmental benefits. Ceramic waste replaced coarse and fine aggregates and cementitious materials in concrete mixtures. The results…

  6. Artikel Jurnal

    Investigation into the microstructural and mineralogical changes induced by internal swelling reactions in concrete used for nuclear power plants – a mock-up study

    Lander Frederickx; Quoc Tri Phung; Jacques Jabbour

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract Extending the lifetime of existing nuclear facilities is becoming in-creasingly relevant to ensure the continued generation of electricity with a low carbon footprint. For this purpose, a thorough assessment is required of the potential pathologies that may arise and affect the integrity…

  7. Artikel Jurnal

    Study on the setting and flow characteristics, unconfined compressive strength, and microscopic properties of ground polymer grouting materials in a recycled concrete micropowder system

    Shusu Duan; Feng Huang; Zhijia Wang dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract This study innovatively develops high-strength geopolymers for grouting materials with a high recycled concrete powder (RCP) usage of 60% to meet engineering needs. It investigates the impact of slurry synthesis parameters such as the mass ratio of RCP to granulated blast-furnace slag (r…

  8. Artikel Jurnal

    Comparative performance of ordinary and recycled aggregate concrete incorporating CFA as SCM

    Chun-Ran Wu; Wei Tang; Fu-Ming Luo dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract This study aims to explore the feasibility of using circulating fluidized bed fly ash (CFA) as a supplementary cementitious material in both ordinary concrete and recycled aggregate concrete (RAC). Various properties of both concretes, including compressive strength, drying shrinkage…

  9. Artikel Jurnal

    Non-linear finite element and theoretical analyses of a timber–concrete composite floor slab with inclined connectors

    Nidya Surya; Charles K. S. Moy

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract Timber–concrete composite floor is an emerging option for the construction industry, and some recent works have studied the effect of inclined connectors in such a system. However, parameters influencing their mechanical behaviours have not been extensively studied. Hence, this study…

  10. Artikel Jurnal

    Fatigue damage characterization in asphalt mixtures using acoustic emission with information entropy and the maximum Lyapunov exponent

    Hui Wei; Yang Wang; Jue Li dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract Traditional non-destructive evaluation (NDE) methods often suffer from insufficient sensitivity in detecting early-stage microcracks and lack real-time monitoring capability. To overcome these limitations, this study conducted four-point bending fatigue tests on notched beam specimens…

  11. Artikel Jurnal

    Mechanical properties and stress-strain relationship of recycled stone masonry aggregate concrete

    Jianguo Chen; Zhuojie Huang; Chengqi Chen dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract This study investigates the mechanical properties and stress-strain relationship of recycled stone masonry aggregate (RSMA) concrete with varying replacement ratios. Using a three-graded RSMA (5–60 mm), the research was further validated through its application in the reconstruction…

  12. Artikel Jurnal

    Assessing carbon emissions of the innovative renovation project of Yihe Bridge on Beijing Road

    Xian Li; Jianzhuang Xiao; Liangyu Zhu dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract Carbon emissions from engineering construction play a critical role in achieving urban carbon peak and neutrality goals. This study evaluates the carbon emission reduction benefits of the renovation project of Yihe Bridge on Beijing Road using a life cycle assessment (LCA) approach. The…

  13. Artikel Jurnal

    Evaluation of the effects of intrinsic soil calcium carbonate and iron oxides on the properties of earthen building materials by means of engineered soils

    Nikiforos Meimaroglou; Charalampos Mouzakis

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract In the context of sustainable development, earthen building materials could be a viable alternative to conventional, energy-intensive materials if the constraints to their general acceptance and widespread use are mitigated. A key challenge is the limited understanding of how intrinsic…

  14. Artikel Jurnal

    Optimized design of ultra-high performance concrete matrix based on multifactor interaction

    Yingxue Wang; Shutong Yang; Wanxiu Wu dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract Renowned for its outstanding strength, durability, and resistance to cracking, ultra-high performance concrete (UHPC) relies on the careful selection of materials and mix design to achieve the ideal combination of extreme strength and fluidity. This study utilized the simplex centroid…

  15. Artikel Jurnal

    Experimental investigation of sustainable structural concrete incorporating completely recycled fine aggregate (CRFA): from material to structural levels

    Yibo Yang; Yi Zhang; Baixi Chen dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract To mitigate the shortage of river sand and promote the reuse of construction waste, this study comprehensively evaluates the applicability of completely recycled fine aggregate (CRFA), produced by crushing concrete waste completely into fine aggregates, in structural concrete from the…

  16. Artikel Jurnal

    Experimental and numerical study on axial compressive strength of waste carbon fibre-reinforced concrete

    Umar Ayaz Lone; Bin Zhao; Danish Yousuf Wani dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract The integration of waste carbon fibre materials, specifically shredded prepreg carbon cloth waste (SPCCW) and discarded carbon fibre-reinforced polymer (DCFRP), presents a sustainable and innovative approach to enhancing the structural performance of concrete. This study evaluates the…

  17. Artikel Jurnal

    Freeze-thaw resistance of self-compacting concrete with marble powder & cement kiln dust filler powders and metakaolin

    Andreas Kounadis; Konstantinos Sotiriadis; Pavla Bauerová dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract Marble powder (MP) and cement kiln dust (CKD) are important industrial by-products generated in large quantities, both with low recycling rates. Contrary to common utilization practices and research trends—such as using MP in plasters and assessing CKD as a supplementary cementitious…

  18. Artikel Jurnal

    Development of sustainable pervious concrete: effects of coal gangue and GGBS on strength, frost resistance, and carbon efficiency

    Haifeng Zhu; Yapeng Ma; Dongsheng Zhang dkk.

    Low-Carbon Materials and Green Construction, Vol. 3 No. 1 · 2025 · Inggris · DOAJ Scopus

    Abstract To explore the feasibility of recycling industrial waste as building materials, this study developed an environmentally friendly, low-carbon pervious concrete (PC). This study used coal gangue micro-powder (CGMP) and ground granulated blast furnace slag (GGBS) as supplementary cementitious…