Biblio Discovery — Demo Discovery Service

280 hasil

Menampilkan 1–20 · 0,23 detik · RSS

Jurnal

Journal of Materials Science: Materials in Engineering

Scopus

ISSN 3004-8958 · SpringerOpen · 280 artikel di indeks

  1. Artikel Jurnal

    Silver-doped TiO2 catalysts for efficient methylene blue removal

    Afra Louhichi; Dhia Cherni; Ammar Houas dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Ag-doped TiO2 nanoparticles were synthesized via a facile sol–gel method to investigate the synergistic effects of silver doping and pH on the photocatalytic degradation of methylene blue (MB). The catalysts, characterized comprehensively by XRD, SEM–EDS, FTIR, and UV–Vis DRS, revealed…

  2. Artikel Jurnal

    Forming characteristics of Mg/Al laminates by pre-rolling corrugated interface process

    Guang Feng; Qinglong Xu; Zhanpeng Yang

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract The conventional flat rolling (FR) process suffers from low bonding strength and significant edge cracks when preparing Mg/Al laminates. This paper proposes a Lattice Severe Deformation Pre-Rolling (LSDPR) corrugated interface scheme and compares it with the FR process. The forming…

  3. Artikel Jurnal

    Functional development and enhanced photocatalytic efficiency of GO-supported SnO2 by optimizing composition

    Umma Sumaia Akter Meem; Rumana A. Jahan; Md Kamal Uddin dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Tin oxide (SnO2) nanoparticles were synthesized followed by the preparation of SnO2–graphene oxide (GO) composites in different proportion ratios by a facile two-step hydrothermal method. Obtained nanomaterials were intensively evaluated employing various analyzing techniques. X-ray…

  4. Artikel Jurnal

    Innovative low-carbon applications of non-traditional cementitious materials for municipal solid waste incineration fly ash stabilization

    Hussein M. Hamada; Alyaa Al-Attar; Zaid A. Al-Sadoon dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract The improper disposal of municipal solid waste incineration fly ash (MSWI-FA) presents serious environmental and health risks due to its toxic constituents, highlighting the urgent need for sustainable treatment and reuse strategies. This study aims to evaluate the potential of…

  5. Artikel Jurnal

    Wear and tribological analysis of graphite-reinforced Al6061-TiB2 hybrid composites fabricated by stir casting

    Haiter Lenin Allasi; S. Suresh; C. Emmy Prema dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract This study investigates the Al6061-TiB2-Gr hybrid composites developed by high-energy stir casting with varying TiB2 (5, 10, 15, and 20 wt.%) and fixed graphite (2 wt.%). The research focuses on both chemical and tribological characterization. The phase composition and elemental analysis…

  6. Artikel Jurnal

    In situ observation of metastable phase separation for the development of high-temperature latent heat energy storage materials

    Hidekazu Kobatake; Shunsuke Hayase; Takuya Goto dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Miscibility gap alloys (MGAs) are promising candidates for high‑temperature thermal energy storage owing to their high latent heat and intrinsic phase separation. In this study, the liquid–liquid phase separation and subsequent solidification of Fe–Cu alloys were experimentally…

  7. Artikel Jurnal

    Multiscale investigation of EMI shielding performance in carbon black-reinforced epoxy composites

    Munishamaiah Krishna

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract This study presents an integrated experimental and analytical investigation of the electromagnetic interference (EMI) shielding effectiveness (SET) of carbon black (CB)-reinforced epoxy composites. Composites were fabricated using a simple hand lay-up technique with CB filler contents…

  8. Artikel Jurnal

    Performance evaluation of a domestic vapor compression refrigeration system using periwinkle-shell-derived CaO-rich nano-lubricant in mineral oil

    Mfon Udoh; Loto Roland Tolulope; Olayinka Soledayo Ohunakin dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract This study presents a novel approach to improving the performance of domestic vapor compression refrigeration systems (VCRS) through a bio-synthesized nano-lubricant derived from periwinkle shells, a biodegradable waste material. Periwinkle-shell-derived CaO-rich nanoparticles (PSD–CaO…

  9. Artikel Jurnal

    Restoring welded inconel 625 integrity: a comprehensive multi-technique analysis of optimized post-weld heat treatment

    Khaleel Abushgair; Mike Haddad; Emad Alzubi dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract This study examines the impact of post-weld heat treatment (PWHT) on TIG-welded Inconel 625 alloy. Seven TIG welding passes under pure argon shielding gas were utilized to join 10 mm-thick plates prepared with V-groove edge machining. Welded plates were subsequently sectioned into ASTM…

  10. Artikel Jurnal

    Structure and activity relationship of rGO–V2O5/Nb composites in the photocatalytic removal of dyes

    L. J. Cardenas-Flechas; D. F. Avendaño-Rodríguez; N. Fernández-Barrero dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract In this study, Nb-doped V2O5/rGO composites were synthesized via the hydrothermal method, with reduced graphene oxide contents ranging from 0 to 15% to evaluate their photocatalytic performance in the degradation of methyl orange (MO), rhodamine B (RhB), and malachite green (MG) under UV…

  11. Artikel Jurnal

    Targeted doping modulation of electrical conductivity and electronic state structure in lithium niobate

    Mohamed Beriniz; Abdelghani Khalil; ALi Amkor dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract This study presents an integrated theoretical approach combining ab initio density functional theory (DFT) simulations with a new analytical model of the ferroelectric phase transition that accounts for interactions between both first and second neighbors in pure and magnesium-doped…

  12. Artikel Jurnal

    Magnetically recoverable trimetallic CuCoFe nanoparticles supported on N-doped carbon derived from ZIF-67 as efficient catalysts for the C–N coupling and Biginelli reactions

    Arezoo Ahmadi; Heshmatollah Alinezhad; Yaghoub Sarrafi

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Trimetallic copper-cobalt-iron nanoparticles supported on nitrogen-doped carbon (CuCoFe@N–C) were synthesized via the pyrolysis of Cu dopped ZIF-67/Fe3O4 composites, producing a magnetically recoverable catalyst with hierarchical micro and mesoporous structure. This work advances…

  13. Artikel Jurnal

    Experimental investigation of hydrophobic characteristics of aluminum oxide on carbon fiber sheet with varied solvent content

    Gaurav Verma; Naveen Kumar; Dinesh Kumar dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract This dip coating research investigates the hydrophobic properties of aluminium oxide coatings on carbon fiber sheets using ethanol, polyvinyl alcohol (PVA), and acetone at varying ratios. The dip coating technique applies Al2O3 coatings to carbon fiber sheets. At 5%, 10%, and 15%, ethanol…

  14. Artikel Jurnal

    Development and optimization of natural dye-based crayons from Rumex abyssinicus using Box-Behnken methodology

    Naol Bekele; Mikiyas Abewaa Gnaro; Ashagrie Mengistu Kebede

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract This study presents the first exploration of natural dye extracted from Rumex abyssinicus for crayon formulation, leveraging its local availability and environmental sustainability. The work focused on evaluating the effects of paraffin wax, talc, extracted dye, and temperature on the…

  15. Artikel Jurnal

    Sustainable building mineral foam insulation: mix design and performance analysis of a low-carbon formulation

    Matthieu Croo; Vincent Dubois; Alain Bataille dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Building insulation is currently one of the biggest challenges to reduce energy consumption. Saving energy also means reducing the human impact on Environment. In order to reduce this impact, the manufacturing of the building materials is of importance. Moreover, policies, laws and…

  16. Artikel Jurnal

    Incorporation of TiO2 and curcumin in polyacrylonitrile nanofibers for antibacterial applications

    Samiksha G. Bansode; Snehal Gagare; Subhash B. Kondawar dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract The polyacrylonitrile (PAN)/ TiO2 nanofiber and PAN/TiO2/curcumin nanofiber mat containing various concentrations of TiO2 and curcumin was fabricated using the electrospinning method and tested for its antibacterial performance. The PAN/TiO2 and PAN/TiO2/curcumin samples were characterized…

  17. Artikel Jurnal

    Friction in metal forming processes: a comprehensive review of experimental methods, influencing factors, and surface engineering approaches

    Atalay Bayable Tiruneh; Teshager Awoke Yeshiwas; Abyot Yassab Nega dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Friction is a critical factor in metal forming processes, influencing material flow, surface quality, tool life, and overall production efficiency. This comprehensive review explores the experimental methods employed to evaluate friction behavior in metal forming, including pin-on-disk…

  18. Artikel Jurnal

    Facile and versatile deposition of oxygen-conducting electrolyte thin films by ultrasonic spray pyrolysis from aqueous solutions

    Niklas Mayr; Christoph Hochenauer; Vanja Subotić dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Thin and dense, oxygen-conducting electrolyte films are essential for intermediate-temperature reversible solid oxide electrolysis cells (rSOCs). Such films can be reliably fabricated using scalable thin-film deposition techniques, such as ultrasonic spray pyrolysis (USP). This work…

  19. Artikel Jurnal

    A comprehensive review on green synthesis of metal and metal oxide nanoparticles: a sustainable alternative for nanotechnology

    Bhiksha Gugulothu; Vijayakumar Sivasundar; Vinodh Choppala dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract To synthesize metallic and metal oxide nanoparticles using biological systems, green synthesis of nanoparticles has emerged as an important area as a sustainable approach compared to conventional chemical/physical methods. Structural activity relationship studies (SARS) that examine the…

  20. Artikel Jurnal

    MRI contrast agents toward cancer treatment: progress and perspectives

    Fang Wang; Changye Zheng; Bihua Liu dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract Magnetic resonance imaging (MRI) is a leading non-invasive imaging modality with high resolution and deep tissue penetration, and it has been widely used in clinical and preclinical cancer diagnosis and therapy. MRI contrast agents play an indispensable role in improving the imaging…