12.728 hasil
Menampilkan 341–360 · 1,14 detik · RSS
-
Artikel Jurnal
Minimal mass design of tensegrity structures considering deformation and prestress
Tensegrity structures are lightweight structures, often deployable, consisting of axial members (rods and cables). One of their design problems is to determine the minimum member mass to support an external force under the buckling and yielding conditions. In the previous work, the deformation of…
-
Artikel Jurnal
Damping performance of a rolling-ball damper
The damping performance of a rolling-ball damper was examined experimentally and numerically. The damper consists of multiple rolling balls on a circular track attached to the main vibration body. Since, unlike mass-spring-tuned mass dampers, it does not use a spring, it is far superior in…
-
Artikel Jurnal
Proposal of inspection method for isolation and vibration control devices using deep learning (Anomaly detection based on force-displacement relationship images of normal data)
This paper proposes a novel inspection system for seismic isolation and vibration control devices using unsupervised deep learning to enhance evaluation reliability and objectivity. Conventional force and stiffness assessments through loading tests require human inspectors, creating potential…
-
Artikel Jurnal
Basic driving test of a hands-free standing vehicle using AR goggles
This study evaluates the effectiveness and risks of using AR goggles in a hands-free standing-type Personal Mobility Vehicle (PMV). AR goggles, which overlay digital information onto the real world, have significant potential for enhancing efficient information access and entertainment experiences…
-
Artikel Jurnal
Study on behavior of a small structure with sliding seismic isolation system and its numerical model
In order to understand rocking vibration characteristics of a small structure installed on the seismic isolation system using sliding mechanical system under various condition, we have performed vibration test and proposed a numerical analysis model using 2-DOF. From results of vibration test using…
-
Artikel Jurnal
Method for fusion of multiple feedback control systems with consideration of interference suppression
A shaking table is a device used in vibration testing to investigate the vibration characteristics of structures. Currently, seismic waveforms used in vibration tests are recorded in acceleration. Therefore, acceleration feedback control is suitable for controlling shaking tables. However, while…
-
Artikel Jurnal
Investigation of excitation force on noise and vibration caused by combustion in a gasoline engine
This study focused on the piston system and targeted vehicle interior noise caused by combustion, which is mainly due to vibration transmission in the high-speed, high-load region. Vehicle interior noise is defined as having both a combustion excitation force, which causes the piston to move due to…
-
Artikel Jurnal
Active control of flows around a bluff body with yaw angle by inducing longitudinal vortices using plasma actuators
Active control of flow separation on a bluff body model utilizing dielectric barrier discharge plasma actuators (DBD-PAs) was experimentally demonstrated at Re = 28,000. The model consisting of a flat side plate and a quarter cylinder with a radius of 84.5 mm was placed 200 mm downstream from the…
-
Artikel Jurnal
On optimization of task assignment in multi-agent systems (Proposal of practical solution search method with reduced computational load and application to mid-air retrieval of low-speed descending object)
This study discusses the concept of resilient multi-agent systems and algorithms for their realization. Specifically, we focus on improving the optimization algorithm for task assignments and applying it to a mid-air retrieval mission. In particular, this study highlights the mid-air retrieval of a…
-
Artikel Jurnal
Electrical impedance observation for lubrication conditions of helical gears under actual operation
In this study, the effectiveness of the electrical impedance method (EIM) for monitoring lubrication conditions in helical gear systems during actual operation was investigated. A custom-built gear tester equipped with helical gears, and an alternating current circuit was used to monitor the…
-
Artikel Jurnal
Development of multi-mode vibration damping device using mass spheres embedded in cuboid viscoelastic material allowing external shape change
This paper deals with an advanced version of eMDVA (embedded Mass Dynamic Vibration Absorber), which is a passive multi-modal damping device that was proposed by the authors. The eMDVA consists of a mass embedded in a viscoelastic material, and the mass can vibrate freely in all directions. The…
-
Artikel Jurnal
Development of a dynamic vibration absorber with adjustment mechanism of spring constant and damping coefficient
This paper proposes a simple passive device with an adjustment mechanism for spring constant and damping coefficient to realize a dynamic vibration absorber (DVA) that can be used for various vibration control target frequencies. The proposed device consists of a coil spring and an air spring with…
-
Artikel Jurnal
Newly appeared microarthropods, mainly terrestrial mites, in the Yukidori Zawa of Langhovde and surrounding ice-free areas, which constitute the Syowa Oasis, East Antarctica
The 28th Japanese Antarctic Research Expedition explored terrestrial microarthropods in 11 ice-free areas around Syowa Station in East Antarctica. In addition to the previously known species of Nanorchestes antarcticus in Endeostigmata, and Tydeus erebus and Neoprotereunetes minutus in Prostigmata…
-
Artikel Jurnal
Re-enchanting a Mature Industry through Craft: A Study of Modified Cars
Previous studies have suggested that craft functions as a counterforce to modern rationality through the re-enchantment. In this context, conventional conceptions of craft are often rooted in a nostalgic orientation toward the pre-industrial era, preceding the advent of mass production. However…
-
Artikel Jurnal
Development of Embedded System for Dome Fuji III Ice Core Drill
We developed an embedded computer and ground monitoring system for the Dome Fuji Deep Ice Coring Project III. The number of slip-ring channels was limited to four. Therefore, a four-channel configuration was used: two channels for the drill motor power supply and two channels with the signal…
-
Artikel Jurnal
Development and validation of the Japanese version of the Romantic Beliefs Scale
Guided by the previous finding indicating that romantic beliefs are predictors of vulnerability to romantic scams, the present study developed a Japanese version of the Romantic Belief Scale (RBS) and examined its relationship with commitment to one’s romantic partner. A total of 397 university…
-
Artikel Jurnal
Current status of scales on well-being and proximity concepts
The “SOS output education” program is being advocated as a proactive measure to address student suicides. Much of the effectiveness verification of this program thus far has focused on the mental and psychological aspects. However, it is also important to test the effectiveness of the program to…
-
Artikel Jurnal
The causal relationships among personality, role satisfaction, and self-esteem
The purpose of this study is to investigate the causal relationships among personality, role satisfaction, and self-esteem. Rolefulness is defined as the continuous sense of role satisfaction in our daily lives and includes two sub-factors: social and internal rolefulness. The Big Five model was…
-
Artikel Jurnal
The role of implicit theories of intelligence in university students’ job search behavior
This study examines the role of implicit theories of intelligence in overcoming difficulties during job search activities among Japanese university students. Specifically, we investigated how mindset beliefs influence intentions to participate in internships, and strategies for information…
Menampilkan maksimal 50 halaman. Persempit pencarian dengan filter untuk hasil yang lebih spesifik.