Biblio Discovery — Demo Discovery Service

6 hasil untuk "Adrian P. Gerlich"

Menampilkan 1–6 · 0,29 detik · RSS

  1. Artikel Jurnal

    Induction kinetic welding (IKW): An innovative one-shot solid-state technique for circular joints

    Farzad Khodabakhshi; Mark Turezki; Adrian P. Gerlich

    Journal of Advanced Joining Processes, Vol. 12 · 2025 · Inggris · DOAJ Scopus

    In this research, an innovative solid-state joining technology has been introduced for butt-welding of circular sections with dissimilar tube and rod geometries, using induction kinetic welding (IKW). This process involves using induction to preheat material before bringing the pieces together…

  2. Artikel Jurnal

    Mechanical properties of aluminum to steel dissimilar spot joints produced by cold metal transfer weld-brazing

    Nazmul Huda; James Chen; Adrian P. Gerlich

    Forces in Mechanics, Vol. 11 · 2023 · Inggris · DOAJ Scopus

    Spot joints between aluminum and steel sheets were produced by cold metal transfer arc welding using an AlSi3Mn alloy low melting point filler wire. The current study found that by using optimal welding conditions, the thickness of the joint interface was significantly reduced compared to previous…

  3. Artikel Jurnal

    Continuous cooling transformation behaviour and toughness of heat-affected zones in an X80 line pipe steel

    Nazmul Huda; Abdelbaset Midawi; James A. Gianetto dkk.

    Journal of Materials Research and Technology, Vol. 12 · 2021 · Inggris · DOAJ Scopus

    A continuous cooling transformation (CCT) diagram was developed using thermal simulation techniques to replicate the coarse-grain heat-affected zone (CGHAZ) of an X80 line pipe steel. Specimens were heated to a peak temperature of 1350 °C with a 1 s hold time, followed by cooling at several rates…

  4. Artikel Jurnal

    On the nature of nano twin-induced shear band formation in a dispersion strengthened copper alloy under micro-mechanical loading

    Shadab Sarmast-Ghahfarokhi; Ali Ghatei-Kalashami; Adrian P. Gerlich dkk.

    Scientific Reports, Vol. 14 No. 1 · 2024 · Inggris · DOAJ Scopus

    Abstract A key challenge in metallic alloys with high ductility is understanding how microstructural inhomogeneities influence shear localization, leading to localized plastic deformation and material failure. In this study, we explore the phenomenon of shear localization in coarse-grained copper…

  5. Artikel Jurnal Teks lengkap

    On the Visualization of Gas Metal Arc Welding Plasma and the Relationship Between Arc Length and Voltage

    Emanuel B. F. Dos Santos; Letícia H. Kuroiwa; A. Felipe C. Ferreira dkk.

    Applied Sciences, Vol. 7 No. 5 · 2017 · Inggris · DOAJ Scopus

    In this article, the camera settings for high-speed imaging of the arc, metal transfer, and weld pool in gas metal arc welding (GMAW) are investigated. The results show that by only changing camera exposure times and the selection of narrow bandpass filters, images that reveal features of the arc…

  6. Artikel Jurnal Teks lengkap

    Interfacial Bonding and Mechanical Properties of Al/Mg Dissimilar Refill Friction Stir Spot Welds Using a Grooved Tool

    Zhikang Shen; Xinyu Liu; Dongxiao Li dkk.

    Crystals, Vol. 11 No. 4 · 2021 · Inggris · DOAJ Scopus

    Al/Mg dissimilar welds were successfully fabricated by refill friction stir spot welding using a grooved sleeve tool. Influences of sleeve penetration depth and rotational speed on the weld formation and mechanical performance were systematically evaluated in terms of welding parameter…