Biblio Discovery — Demo Discovery Service

23 hasil untuk "G. RajeshKumar"

Menampilkan 1–20 · 0,27 detik · RSS

  1. Artikel Jurnal

    Effect of sodium hydroxide treatment on dry sliding wear behavior of sp. fiber reinforced polymer composites

    G Rajeshkumar

    Journal of Industrial Textiles, Vol. 51 · 2022 · Inggris · DOAJ Scopus

    In this work, the effect of various concentrations of sodium hydroxide treatment (5, 10, 15 and 20%) on tribological properties of Phoenix sp. fiber reinforced epoxy composites was investigated for the first time and reported. The composites were fabricated by using compression molding technique…

  2. Artikel Jurnal

    A New Study on Tribological Performance of Phoenix Sp. Fiber-Reinforced Epoxy Composites

    G. Rajeshkumar

    Journal of Natural Fibers, Vol. 18 No. 12 · 2021 · Inggris · DOAJ Scopus

    This paper presents the tribological performance of Phoenix sp. fiber-reinforced tribo-composites based on epoxy. The Phoenix sp. fiber-reinforced epoxy composites were fabricated by varying the fiber length (10, 20, and 30 mm) and fiber volume fraction (10%, 20%, 30%, 40%, and 50%) using the…

  3. Artikel Jurnal

    Characterization of Surface Modified Phoenix sp. Fibers for Composite Reinforcement

    G. Rajeshkumar

    Journal of Natural Fibers, Vol. 18 No. 12 · 2021 · Inggris · DOAJ Scopus

    This paper reports the morphological, physical, chemical, mechanical and thermal properties of untreated and various chemically treated natural fibers extracted from the petioles of the Phoenix sp. plants. The outcome of morphological analysis revealed that the treated Phoenix sp. fibers have tiny…

  4. Artikel Jurnal

    An Investigation into the Tribological Properties of Bidirectional Jute/Carbon Fiber Reinforced Polyester Hybrid Composites

    P. Ravikumar; A. R. Suresh; G. Rajeshkumar

    Journal of Natural Fibers, Vol. 19 No. 3 · 2022 · Inggris · DOAJ Scopus

    In this work, the tribological performance of bidirectional jute/carbon fiber reinforced polyester composites was investigated using response surface methodology. The effects of three factors namely fiber weight fraction, load, and sliding velocity on the wear and friction values were examined. The…

  5. Artikel Jurnal

    Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata / Corchorus Capsularis Reinforced Hybrid Composites

    N Karthi; K Kumaresan; G Rajeshkumar dkk.

    Journal of Natural Fibers, Vol. 19 No. 12 · 2022 · Inggris · DOAJ Scopus

    This paper explores the tribological efficiency of Musa acuminata (B – Banana)/Corchorus capsularis (J – Jute) fibers reinforced epoxy-based tribo-composites which was fabricated by varying the content of these fibers (MC1 – 15 wt.% of Banana and 15 wt.% of Jute, MC2 – 20 wt.% of Banana and 20 wt.%…

  6. Artikel Jurnal

    Enhancement of Mechanical Behavior of PLA Matrix Using Tamarind and Date Seed Micro Fillers

    J. Nagarjun; J. Kanchana; G. RajeshKumar dkk.

    Journal of Natural Fibers, Vol. 19 No. 12 · 2022 · Inggris · DOAJ Scopus

    This paper reports the mechanical properties of PLA composites incorporated with tamarind and date seed Micro fillers. The composites were manufactured through compression molding technique. The tensile results showed that the seed filler reinforcement has significantly improved the tensile…

  7. Artikel Jurnal

    Sustainable Development of Cissus Quadrangularis Stem Fiber/epoxy Composite on Abrasive Wear Rate

    Jenish Iyyadurai; Veeramalai Chinnasamy Sathish Gandhi; Indran Suyambulingam dkk.

    Journal of Natural Fibers, Vol. 19 No. 14 · 2022 · Inggris · DOAJ Scopus

    Natural fibers have the potential to replace artificial fibers in structural applications. The abrasive wear performance of natural fiber–reinforced polymer composite has not been investigated in many studies. This study discusses the specific wear rate of Cissus quadrangularis stem fiber…

  8. Artikel Jurnal

    Review on extraction, characterization, surface treatment and thermal degradation analysis of new cellulosic fibers as sustainable reinforcement in polymer composites

    Deeksha Jaiswal; G.L. Devnani; G. Rajeshkumar dkk.

    Current Research in Green and Sustainable Chemistry, Vol. 5 · 2022 · Inggris · DOAJ Scopus

    Nowadays, as environmental awareness is key issue among researchers, scientific community is looking for natural materials as they are biodegradable, low cost, eco-friendly and also safe for health. Researchers and academicians have found many natural fibers and studied their properties for their…

  9. Artikel Jurnal

    Improvement of mechanical and thermal properties of hybrid composites through addition of halloysite nanoclay for light weight structural applications

    K C Nagaraja; S Rajanna; G S Prakash dkk.

    Journal of Industrial Textiles, Vol. 51 · 2022 · Inggris · DOAJ Scopus

    In this work the effect of stacking sequence of Carbon (C)/Glass (G) fibers and halloysites addition (1, 3 and 5 wt.%) on the mechanical and thermal properties of the hybrid composites were explored. The composite laminates were prepared by using Vacuum Assisted Resin Infusion Technique (VARIT)…

  10. Artikel Jurnal

    Mechanical, water absorption and wear characteristics of novel polymeric composites: Impact of hybrid natural fibers and oil cake filler addition

    KR Sumesh; V Kavimani; G Rajeshkumar dkk.

    Journal of Industrial Textiles, Vol. 51 · 2022 · Inggris · DOAJ Scopus

    A novel epoxy-based composites were fabricated by reinforcing pineapple/flax (PF) fibers and peanut oil cake (PCF) filler using the hand layup cum compression moulding technique and investigated its mechanical, water absorption and wear properties as a function of wt.% of PF fibers (20–40 wt.%) and…

  11. Artikel Jurnal

    Effectiveness of Phoenix sp. particles as reinforcement in epoxy composites: Mechanical, free vibration, thermal, and water absorption characteristics

    G. Rajeshkumar; A. Poovarasan; S.V. Naren Prasaadh dkk.

    Results in Engineering, Vol. 29 · 2026 · Inggris · DOAJ Scopus

    Integrating natural fillers into polymer composites has been identified as a feasible and viable technique for improving performance of the material with preserving sustainability. In this work epoxy-based composites are fabricated by incorporating Phoenix sp. natural fillers in different weight…

  12. Artikel Jurnal

    An Investigation into the Mechanical and Wear Characteristics of Hybrid Composites: Influence of Different Types and Content of Biodegradable Reinforcements

    K. R. Sumesh; V. Kavimani; G. Rajeshkumar dkk.

    Journal of Natural Fibers, Vol. 19 No. 8 · 2022 · Inggris · DOAJ Scopus

    This research work focuses on the wear characteristics of hybrid composites prepared using Sisal fiber (SF) /Pineapple fiber (PF) and Pineapple fly ash (PA) in various wt.%. Linear reciprocating tribometer was used for determining the Specific Wear Rate (SWR) and Coefficient of Friction (CoF) of…

  13. Artikel Jurnal

    Effect of halloysite addition on the dynamic mechanical and tribological properties of carbon and glass fiber reinforced hybrid composites

    G. Rajeshkumar; K.C. Nagaraja; P. Ravikumar dkk.

    Heliyon, Vol. 10 No. 15 · 2024 · Inggris · DOAJ Scopus

    Composite materials have become prominent in the aerospace, automotive, wind energy, biomedical, and machine tool industries. This has demanded the evaluation of the dynamic mechanical and tribological behaviour of composites to understand their performance and ensure their reliability and safety…

  14. Artikel Jurnal

    Exploring Artabotrys hexapetalus seed particles as reinforcement for sustainable composites: Mechanical, thermal, water absorption and morphological studies

    G. Rajeshkumar; S. Prithika; S. Keerthika dkk.

    Next Materials, Vol. 13 · 2026 · Inggris · DOAJ Scopus

    The increasing awareness on the harmful effects of synthetic materials, the use of natural and renewable resources such as natural fillers as reinforcement in polymer composites has drawn significant attention in recent years. The current study involves the use one such natural filler obtained from…

  15. Artikel Jurnal

    Evaluation of Mechanical and Water Absorption Behaviors of Jute/Carbon Fiber Reinforced Polyester Hybrid Composites

    P. RaviKumar; G. Rajeshkumar; Jeganathan Prakash Maran dkk.

    Journal of Natural Fibers, Vol. 19 No. 13 · 2022 · Inggris · DOAJ Scopus

    In this work, the influence of hybridizing jute and carbon fibers on the mechanical properties and water absorption behavior of polyester composites was evaluated. The composites were fabricated by using compression molding technique with discrete of overall fiber weight fraction, being pure jute…

  16. Artikel Jurnal

    Mechanical and Vibro-Acoustic Properties of Bauhinia purpurea L Fiber‑Reinforced Polyester Composites

    G. Rajeshkumar; S. Gokulkumar; V. Vignesh dkk.

    Journal of Natural Fibers, Vol. 23 No. 1 · 2026 · Inggris · DOAJ Scopus

    The reduction of environmental impact has been facilitated by stringent environmental regulations, the imperative to decrease greenhouse gas emissions, and the obligation to adhere to governmental laws for recycling and reuse. Natural fiber composites, which can rival synthetic fiber composites in…

  17. Artikel Jurnal

    Delamination and surface roughness analysis of jute/polyester composites using response surface methodology: Consequence of sodium bicarbonate treatment

    P Ravikumar; G Rajeshkumar; P Manimegalai dkk.

    Journal of Industrial Textiles, Vol. 51 · 2022 · Inggris · DOAJ Scopus

    The present research work explores the consequence of eco-friendly sodium bicarbonate treatment on drilling behavior of jute fiber reinforced polyester composites. The fiber surface treatment was done by immersing the jute fibers in sodium bicarbonate solution (10 wt.%) for five days at room…

  18. Artikel Jurnal

    Tribological behaviour of hybrid-reinforced LM30 aluminium metal matrix composites

    A. R. Suresh; P. Ravikumar; G. Rajeshkumar dkk.

    Journal of Materials Science: Materials in Engineering, Vol. 21 No. 1 · 2026 · Inggris · DOAJ Scopus

    Abstract The development of wear-resistant materials is critical for researchers aiming to extend the life of sliding components employed in mechanical engineering fields by reducing friction-related energy losses. The motive of the study is to fabricate the hybrid composites of aluminium which…

  19. Artikel Jurnal

    Isolation and characterization of biomass waste based bioplasticizer from Eucalyptus leaf: A suitability analysis of biofiller for polymeric composites

    Indran Suyambulingam; Sunesh Narayanaperumal; Femiana Gapsari dkk.

    Results in Engineering, Vol. 24 · 2024 · Inggris · DOAJ Scopus

    Plasticizers improve polymeric materials' properties and processability as additives. Currently, a variety of liquid synthetic plasticizers derived from fossil fuels are available. The environmental unsuitability of these materials could potentially lead to adverse effects on the environment. When…

  20. Artikel Jurnal

    Influence of Processing Variables on Tensile Strength and Water Absorption of Natural Fibers Hybrid Composites

    K. Saravanan; S. Kubera Sampath Kumar; C. Prakash dkk.

    Journal of Natural Fibers, Vol. 19 No. 15 · 2022 · Inggris · DOAJ Scopus

    Natural fibers are gaining popularity among researchers and academics for use in polymer composites due to their environmental friendliness and long-term viability.A new series of green composites using chicken feather fiber (CFF) and jute as reinforcing materials in a polypropylene resin-based…