24 hasil untuk "Jixing Lin"
Menampilkan 1–20 · 0,28 detik · RSS
-
Artikel Jurnal
Titanium-niobium pentoxide composites for biomedical applications
The strength of titanium scaffolds with the introduction of high porosity decreases dramatically and may become inadequate for load bearing in biomedical applications. To simultaneously meet the requirements of biocompatibility, low elastic modulus and appropriate strength for orthopedic implant…
-
Artikel Jurnal
Cold rolling deformation and annealing behavior of a β-type Ti–34Nb–25Zr titanium alloy for biomedical applications
In this study, the microstructures and mechanical properties of a newly developed β-type Ti–34Nb–25Zr (TNZ) alloy after cold rolling at different reduction ratios and recrystallization annealing were investigated by optical microscopy, XRD, SEM, EBSD, hardness and tensile tests. The tensile…
-
Artikel Jurnal
Improvements in mechanical, corrosion, and biocompatibility properties of Mg–Zr–Sr–Dy alloys via extrusion for biodegradable implant applications
In this study, extrusion was performed on Mg‒Zr‒Sr‒Dy alloys for improving their mechanical, corrosion, and biocompatibility properties. Effects of extrusion and alloying elements on the microstructural characteristics, tensile and compressive strengths, corrosion behavior, and biocompatibility…
-
Artikel Jurnal
Microstructures, mechanical properties, corrosion, and biocompatibility of extruded Mg-Zr-Sr-Ho alloys for biodegradable implant applications
In this study, the microstructures, mechanical properties, corrosion behaviors, and biocompatibility of extruded magnesium-zirconium-strontium-holmium (Mg-Zr-Sr-Ho) alloys were comprehensively investigated. The effect of different concentrations of Ho on the microstructural characteristics, tensile…
-
Artikel Jurnal
Microstructures and mechanical properties of Ni60 alloy fabricated by laser metal deposition
Due to its low melting point and high hardness, Ni60 (Ni–Cr–B–Si) alloy is widely used as surface cladding material for mould steel. In present study, Ni60 alloy thin-walled samples were fabricated using laser metal deposition (LMD) technology on H13 steel substrate which is usually used as mould…
-
Artikel Jurnal
A combined preoperative red cell distribution width and carcinoembryonic antigen score contribute to prognosis prediction in stage I lung adenocarcinoma
Abstract Aims Hematological markers that can be used for prognosis prediction for stage I lung adenocarcinoma (LUAD) are still lacking. Here, we examined the prognostic value of a combination of the red cell distribution width (RDW) and carcinoembryonic antigen (CEA), namely, the RDW-CEA score…
-
Artikel Jurnal
Development of in-situ Zn–3Cu–10ZnO composite prepared by high-pressure solidification for orthopedic applications
Biodegradable zinc (Zn)-based composites are considered to be the next generation of promising orthopedic implant materials due to their degradability and the multiple functionality of combining metal and ceramic phases. However, its clinical bone-implant application is seriously limited due to…
-
Artikel Jurnal Teks lengkap
Application of the Ultraleap 3Di-Based Gesture-Controlled 3D Imaging Visualization System in Pulmonary Segmentectomy: A Single-Center Prospective Study
Objective: Pulmonary segmentectomy serves as a crucial approach for treating early-stage lung cancer. However, this procedure demands precise identification of segmental anatomy, and surgeons often need to repeatedly consult the patient’s 3D imaging data or other medical records during the…
-
Artikel Jurnal
Effect of thermomechanical treatment on the mechanical and microstructural evolution of a β-type Ti-40.7Zr–24.8Nb alloy
In this study, the microstructural evolution and mechanical properties of a newly developed Ti-40.7Zr–24.8Nb (TZN) alloy after different thermomechanical processes were examined. As-cast TZN alloy plates were solution-treated at 890 °C for 1 h, after which the thickness of the alloy plates was…
-
Artikel Jurnal
Impact of scandium and terbium on the mechanical properties, corrosion behavior, and biocompatibility of biodegradable Mg-Zn-Zr-Mn alloys
Magnesium (Mg)-based bone implants degrade rapidly in the physiological environment of the human body which affects their structural integrity and biocompatibility before adequate bone repair. Rare earth elements (REEs) have demonstrated their effectiveness in tailoring the corrosion and mechanical…
-
Artikel Jurnal
Clear cell tumor of the lung could be aggressive: a case report and review of the literature
Abstract Background Clear cell tumors of the lung (CCTLs) are rare and mostly benign pulmonary neoplasms arising from perivascular epithelioid cells. Only approximately 100 cases have been reported, and half of them were in China. Limited details about CCTLs often cause diagnostic or therapeutic…
-
Artikel Jurnal
Enhancing mechanical strength, tribological properties, cytocompatibility, osteogenic differentiation, and antibacterial capacity of biodegradable Zn-5RE (RE = Nd, Y, and Ho) alloys for potential bone-implant application
Degradable zinc (Zn) based metals exhibit great promise as potential load-bearing bone-implant materials due to their suitable biodegradability, good fabricate-friendliness, biocompatibility, and favorable osteogenesis-promoting capacity. Nevertheless, most as-cast Zn-based metals display poor…
-
Artikel Jurnal
Additively-Manufactured Spodumene-Doped Glass-Ceramics For Dental Restorations
Aim or purpose: Lithium disilicate glass-ceramics (LDGCs) are widely employed in dental aesthetic restorations; however, their application is constrained by insufficient fracture toughness and the inefficiencies inherent in conventional milling processes. This study investigated the additive…
-
Artikel Jurnal
Biomimetic Li2si2o5 Composites With High Energy Absorption Via Vat Photopolymerization
Aim or purpose: This study aims to achieve the preservation of residual roots and crowns, along with minimally invasive restoration to prevent the catastrophic damage of abutment tooth. Materials and methods: angular XRD were used for residual stress evaluation; three-point bending testing and…
-
Artikel Jurnal Teks lengkap
Risk management system and application of CO2 flooding and sequestration leakage
CO2 flooding and sequestration technology can significantly improve crude oil recovery rates while enge. However, the oil displaceabling large-scale CO2 flooding and sequestration process is accompanied by various CO2 leakage risks. In response to the lack of previous CO2 leakage risk management…
-
Artikel Jurnal
Advances in the development and application of non-contact intraoperative image access systems
Abstract This article provides an overview of recent progress in the achievement of non-contact intraoperative image control through the use of vision and sensor technologies in operating room (OR) environments. A discussion of approaches to improving and optimizing associated technologies is also…
-
Artikel Jurnal
An in situ Zn–5Mg2Ge composite processed by ultrasonication for biodegradable orthopedic implant applications
Zinc (Zn)-based composites have been received adequate attention lately in the biomedical field as degradable biomaterials owing to their simple preparation process, inherent biodegradability, intrinsic biological activity, and good biocompatibility. Nevertheless, the low mechanical strength and…
-
Artikel Jurnal
Shear bond strength, finite element analysis, flexural strength and accuracy analysis of additively manufactured bio-inspired 3Y-TZP for dental applications
Weak shear bond strength (SBS) has always been a challenge for clinical bonding of 3mol% yttria-stabilized tetragonal zirconia (3Y-TZP). With the development of additive manufacturing technology, vat photopolymerization (VPP) is an alternative that allows zirconia to form precise complex structures…
-
Artikel Jurnal
In situ phosphorus-modified Mg2Ge/Zn-Cu composite with improved mechanical, degradation, biotribological properties, and in vitro and in vivo osteogenesis and osteointegration performance for biodegradable bone-implant applications
Zinc (Zn)-based composites are promising biodegradable bone-implant materials because of their good biocompatibility, processability, and biodegradability. Nevertheless, the low interfacial bonding strength, coordinated deformation capacity, and mechanical strength of current Zn-based composites…
-
Artikel Jurnal
Ultrafine Frequency Linearly Tunable Single-Frequency Fiber Laser Based on Intracavity Active Tuning
An ultrafine frequency linearly tunable single-frequency fiber laser based on the intracavity active tuning is demonstrated. Single-frequency operation can be achieved by an ultrashort cavity and ultranarrow polarization-maintaining fiber Bragg grating. A sub-nanometer-accuracy piezoelectric…