7 hasil untuk "Samar Reda Al-Sayed"
Menampilkan 1–7 · 0,55 detik · RSS
-
Artikel Jurnal
Metallographic investigation of laser-treated ductile iron surface with different laser heat inputs
In the current work, the impact of various laser heat inputs on the final microstructure of the nodular graphite cast iron as well as its microhardness values were evaluated. A proper processing window of four different laser powers (600, 1000, 1400, and 1800 W) with four corresponding different…
-
Artikel Jurnal
A comparative study of laser fluence effect on surface modification and hardness profile of austempered ductile iron
The impact of laser transformation hardening (LSH) and Laser surface melting (LSM) on an austempered ductile iron (ADI) alloy was investigated. Various laser fluences (J mm−2) were irradiated on the ADI specimens, obtained by different beam powers and scanning speeds to reach the optimum parameters…
-
Artikel Jurnal
New 3D model for accurate prediction of thermal and microstructure evolution of laser powder cladding of Ti6Al4V alloy
The high corrosion resistance, low density, and useful biological activity with heat resistance of titanium alloys have made them the most outstanding choice in various industrial applications. However, their poor tribological properties inhibit utilizing them in applications that need abrasive and…
-
Artikel Jurnal Teks lengkap
Laser Surface Hardening of Ni-hard White Cast Iron
Laser surface treatment on two different types of nickel–chromium white cast iron (Ni-hard) alloys (Ni-hard 1 and Ni-hard 4) was investigated. Nd:YAG laser of 2.2-kw with continuous wave was used. Ni-hard alloys are promising engineering materials, which are extensively used in applications where…
-
Artikel Jurnal
Laser surface melting of TC21 (α + β) titanium alloy with 80 % track Overlap: Microstructural evolution and hardness Enhancement
TC21 titanium alloy is broadly used in aerospace, automotive, and petrochemical applications due to its extraordinary properties. Laser surface melting (LSM) provides a practical approach to enhancing its surface characteristics. This study evaluates the influence of LSM on microstructure and…
-
Artikel Jurnal Teks lengkap
Laser Surface Modification of TC21 (α/β) Titanium Alloy Using a Direct Energy Deposition (DED) Process
The TC21 alloy (Ti-6Al-3Mo-1.9Nb-2.2Sn-2.2Zr-1.5Cr) is considered a new titanium alloy that replaced the commercial Ti-6Al-4V alloy in aerospace applications due to its higher operating temperatures. Recently, direct energy deposition was usually applied to enhance the hardness, tribological…
-
Artikel Jurnal Teks lengkap
Erratum: Elshazli et al. Laser Surface Modification of TC21 (α/β) Titanium Alloy Using a Direct Energy Deposition (DED) Process. Micromachines 2021, 12, 739
In the original article [...]