19 hasil untuk "Y.C. Lin"
Menampilkan 1–19 · 2,47 detik · RSS
-
Artikel Jurnal
Investigations on the warm spinning characteristics and processing parameters optimization of AA 7075 aluminum alloy conical parts with inner ribs
The warm spinning of AA7075 aluminum alloy conical parts with internal ribs involves complex deformation conditions including compression and shear plastic deformation. To mechanistically reproduce these deformation characteristics, the warm compression tests and notched specimen warm tensile tests…
-
Artikel Jurnal
Microstructural variations and kinetic behaviors during metadynamic recrystallization in a nickel base superalloy with pre-precipitated δ phase
The metadynamic recrystallization (MDRX) features of a Ni-based alloy with pre-precipitated δ phases (Ni3Nb) are researched by two-pass hot compressive experiments. Microstructural variations with deformation parameters are analyzed. Results reveal that the softening effects induced by MDRX become…
-
Artikel Jurnal
Balancing strength and ductility by controllable heat-treatment twinning in a near β-Ti alloy
A new thermomechanical process was applied to a near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloy to induce twinning. The resulting combination of ultrafine grains and heat-treatment twins endowed the alloy with excellent tensile strength (1544 MPa) and elongation (13%). β-Field cross-rolling formed micro-sized β…
-
Artikel Jurnal
A physically-based model considering dislocation–solute atom dynamic interactions for a nickel-based superalloy at intermediate temperatures
The uniaxial tensile tests are performed to study flow behavior of a nickel-based superalloy with different initial microstructures at an intermediate temperature range (473–973 K). The experimental results show that the obvious serrated flow characteristics can be observed from the flow stress…
-
Artikel Jurnal
Influences of stress triaxiality and forming parameters on microstructural evolution and fracture mechanisms in a Ni–Cr–Mo-based superalloy
Hot tensile features in a Ni–Cr–Mo-based superalloy with different notched types are explored. Changes of microstructure and fracture mechanisms with stress triaxiality and tensile parameters are elucidated. Results manifest that the maximum load for the Ni–Cr–Mo-based superalloy in hot tensile…
-
Artikel Jurnal
An open-source membrane stretcher for simultaneous mechanical and structural characterizations of soft materials and biological tissues
The ability to simultaneously measure material mechanics and structure is central for understanding their nonlinear relationship that underlies the mechanical properties of materials, such as hysteresis, strain-stiffening and -softening, and plasticity. This experimental capability is also critical…
-
Artikel Jurnal
Investigation of compact tensile and fracture mechanical properties of a duplex stainless steel bimetal composite with the interfacial zone
The interfacial zone formed in the manufacturing process of bimetal or laminated metal composites owes complicated microstructures and properties. This special feature greatly affects the fracture toughness and fatigue strength of metal composites. The crack growth behaviours, from a weak layer…
-
Artikel Jurnal
Phenotyping senescent mesenchymal stromal cells using AI image translation
Mesenchymal stromal cells (MSCs) offer promising potential in biomedical research, clinical therapeutics, and immunomodulatory therapies due to their ease of isolation and multipotent, immunoprivileged, and immunosuppersive properties. Extensive efforts have focused on optimizing the cell isolation…
-
Artikel Jurnal
Microstructural evolution characteristics and a unified dislocation-density related constitutive model for a 7046 aluminum alloy during hot tensile
Hot tensile features of a commercial 7046 aluminum alloy are investigated through employing high-temperature tensile tests. The evolving mechanisms of microstructures over high-temperature tensile parameters are systematically revealed. A unified dislocation-density related constitutive model is…
-
Artikel Jurnal
Microstructure evolution mechanisms and a physically-based constitutive model for an Al–Zn–Mg–Cu–Zr aluminum alloy during hot deformation
High-temperature flow features of the Al−Zn−Mg−Cu−Zr aluminum alloy was revealed by hot compression tests. The evolution mechanisms of dislocation clusters, subgrain, and dynamic recrystallization (DRX) grains, are thoroughly explored by EBSD and TEM analysis. Experimental results suggest that the…
-
Artikel Jurnal
Influences of stress-aging on the precipitation behavior of δ phase (Ni3Nb) in a nickel-based superalloy
The precipitation behaviors of δ phases (Ni3Nb) in a nickel-based superalloy are investigated by stress-free and stress aging tests. The effects of aging parameters on the distribution features of δ phases are discussed. Also, the evolution of dislocation substructures is analyzed. The results show…
-
Artikel Jurnal
Effects of solution time and cooling rate on microstructures and mechanical properties of 2219 Al alloy for a larger spun thin-wall ellipsoidal head
The effects of solution time and cooling rate on microstructures and mechanical properties of 2219 Al alloy for a larger spun thin-wall ellipsoidal head are investigated. It is found that the Al2Cu phases are greatly affected by the solution time. The content of Al2Cu phases first decreases and…
-
Artikel Jurnal
Hot deformation physical mechanisms and a unified constitutive model of a solid solution Ti55511 alloy deformed in the two-phase region
In this work, the flow behaviors and microstructure evolution of a solid solution Ti55511 alloy deformed in the two-phase region are investigated by hot compression experiments. Subsequently, The spheroidization mechanisms of α phases and the refinement mechanism of β matrix are analyzed. The alloy…
-
Artikel Jurnal
A unified constitutive model and microstructure evolution of a solution treated 7075 aluminum alloys under warm forming condition
The warm flow characteristics and microstructural evolution features in a solution-treated 7075 aluminum alloy are revealed. An elastic-visco-plastic constitutive model is developed to capture the flow stress behavior of 7075 aluminum alloy under warm deformation. The variations of microstructure…
-
Artikel Jurnal
Effect of withdrawal rate on the microstructure and static recrystallization behavior of Ni-based single crystal superalloy
The deformation characteristics after directional solidification at different withdrawal rates and static recrystallization (SRX) during solution heat treatment of Ni-based single-crystal superalloy castings were systematically investigated. The primary dendrite arm spacing was slightly affected by…
-
Artikel Jurnal
Formation and elimination mechanisms of prior particle boundaries in a new powder metallurgy superalloy
The formation of prior particle boundaries (PPBs) in a new powder metallurgy superalloy during hot isostatic pressing (HIP) is investigated. Also, the impact of subsequent hot deformation on the elimination of PPBs is systematically studied. The PPBs involves large γ′ phases, carbides (MC and M6C)…
-
Artikel Jurnal Teks lengkap
Arsenic trioxide reduces the invasive and metastatic properties of nasopharyngeal carcinoma cells in vitro
Nasopharyngeal carcinoma (NPC) is notorious for the metastases, which are in close association with Epstein-Barr virus-encoded latent membrane protein 1 (LMP1). Arsenic trioxide (As2O3) has been shown to induce apoptosis and differentiation in NPC xenografts. Then, can it repress the cancer cells'…
-
Artikel Jurnal
Comparison of gastrointestinal microbiota in golden snub-nosed monkey (Rhinopithecus roxellanae), green monkey (Chlorocebus aethiops sabaeus), and ring-tailed lemur (Lemur catta) by high throughput sequencing
High throughput sequencing of gut microbiota helps to understand the nutrition and health of the host. In this sense, it is an important tool for improving wildlife conservation and management. Little is known about the microbial communities occupying the gastrointestinal tract and the differences…
-
Artikel Jurnal
Upregulation of Haploinsufficient Gene Expression in the Brain by Targeting a Long Non-coding RNA Improves Seizure Phenotype in a Model of Dravet Syndrome
Dravet syndrome is a devastating genetic brain disorder caused by heterozygous loss-of-function mutation in the voltage-gated sodium channel gene SCN1A. There are currently no treatments, but the upregulation of SCN1A healthy allele represents an appealing therapeutic strategy. In this study we…