12.729 hasil
Menampilkan 801–820 · 3,43 detik · RSS
-
Artikel Jurnal
Determination of fracture mechanics parameters by digital image correlation method of surface crack for 7075 Al alloy under nonproportional cyclic loading (Growth life prediction method considering shear stress on the crack surface)
A method for predicting the propagation life of a crack initiated on the surface of a 7075 aluminum alloy under nonproportional loading was proposed using the modified Paris law. The nonproportional loading conditions in previous studies are limited to derive an experimental formula that can…
-
Artikel Jurnal
Behavior during Twin Tunnel Construction Based on Measurement Results and Validity of Numerical Analysis
In recent years, there has been an increase in cases where new tunnels are excavated parallel to existing tunnels along highways and major national roads. Although separation distances are secured in the planning and design phases to avoid interference between the tunnels, there can still be…
-
Artikel Jurnal
Phase Diagram of The Ni-Co-Cu System by Thermal Analysis
To provide more reliable data, liquidus lines and solidus lines of the Ni-Co-Cu system in the temperature range from 1400 to 1750K were determined by Thermogravimetry-Differential Thermal Analysis (TG-DTA). The liquidus lines and the solidus lines were determined for low Cu and high Ni…
-
Artikel Jurnal
Abnormality detection of sliding surface and exploration suitable sensor data for condition monitoring by calculating contribution using machine learning
As machines become more sophisticated and manufacturing processes more complex in the manufacturing industry, there is a need to build simple systems that enable condition monitoring without specialized knowledge. Therefore, AI-based condition monitoring is attracting attention. To improve the…
-
Artikel Jurnal
Anomaly detection of care robot users in standing up using CoG candidates
There is a growing demand for robots that can assist the elderly to stand up independently. To this end, it is important for the robots to estimate the user's condition and provide appropriate assistance. In particular, the robots are required to be able to detect abnormal conditions and prevent…
-
Artikel Jurnal
Firm-specific demands on open source software communities (OSC): Elucidating the problem generation mechanism focusing on organizational characteristics of OSCs
In this study, based on the insights from the case study, we discuss the causes and mechanisms of problems arising from firms’ custom orders to OSCs, focusing on the organizational characteristics of OSCs, and propose hypotheses. Since the 21st century, the main field of software development has…
-
Artikel Jurnal
Corrosion fatigue property of 2.25Cr-1Mo steels in a high-temperature sulfide corrosion atmosphere simulating the inside of a pulverized coal-fired boiler
Fatigue cracks have been observed in the boiler water wall tubes of pulverized coal-fired power plants in high-temperature sulfide corrosive environments, and there is concern that thermal fatigue cracks will increase and propagate as the power output of pulverized coal-fired power plants increases…
-
Artikel Jurnal
Fatigue life evaluation of aged rails focusing on the state of hanging sleepers and rail-head surface irregularities that affect rail stress
In this study, we focused on hanging sleepers and rail-head surface irregularities, which are considered to affect the fatigue life of aged rails, and statistically analyzed their occurrence on commercial lines. The occurrence of these conditions was expressed by the probability density function…
-
Artikel Jurnal
A study on data-driven and multi-scale modeling method for production system simulation “Model configuration and identification for flow shop production systems”
To efficiently operate complicated production systems such as mixed-flow production, production system simulation is a promising tool. However, constructing accurate simulation models requires significant effort. In this study, we proposed a data-driven and multi-scale modeling approach that…
-
Artikel Jurnal
Study on non-contact dispersion evaluation method by 3D Motion Mixer
One of the key functions of a mixer is to achieve uniform mixing of powders or liquids. In this study, a 3D motion mixer with a sealed container without mixing blades was employed. However, the internal flow behavior of powders or liquids within such sealed containers remains unknown, assessing the…
-
Artikel Jurnal
Assist-as-needed control based on region attractor for power-assist of knee joint taking into account differences in human and orthotic motion
This paper proposes an assist-as-needed (AAN) controller for power-assist of a knee joint that takes into account differences in human and orthotic motion. The AAN control is one control method that adjusts the assist performance according to the wearer’s ability. AAN controllers are often designed…
-
Artikel Jurnal
Muscle force analysis for cart-pushing motion: Examination of push-start operation
According to a survey conducted by the Ministry of Health, Labour and Welfare in Japan in 2023, the numbers of fatalities and injuries at factories and other production sites have been decreasing, but the numbers of injuries have been increasing. For this study, musculoskeletal model analysis was…
-
Artikel Jurnal
Direct numerical simulation study on relationship between Ranque-Hilsch effect and turbulence in high-speed swirling flow inside a cylindrical vortex chamber
The Ranque-Hilsch vortex tube (RHVT) is a device which can separate compressed gas into high and low energy flows only through its own fluid motion by generating a high-speed swirling flow inside a cylindrical vortex chamber. The energy separation phenomenon of RHVT is called the Ranque-Hilsch…
-
Artikel Jurnal
Evaluation of prognosis solutions for wind turbine using multi agent simulation of maintenance business
In the maintenance service business, introducing IoT solutions is an expected strategy to improve the maintenance efficiency. However, it is difficult to predict in advance the quantitative effects of IoT solutions on the overall business. This study proposes the simulation approach to…
-
Artikel Jurnal
Les grandes lignes de développement du pragmatisme
This article, first published in Japanese in 1957, is divided into three main parts. It begins with a history of the introduction of pragmatism to Japan since the Meiji era. It continues with a critical analysis of the evolution of pragmatism in the United States after the Second World War. The…
-
Artikel Jurnal
Le « Tokyo parallèle » des architectes japonais contemporains ou la fabrique figurée du futur de la métropole
This article examines the discourses, figures, narratives or imaginaries mobilized by Japanese architects to draw the future of Tokyo since the post-war reconstruction. The design and dissemination of large-scale projects reveals a quest for an overarching image for the capital in a space where…
-
Artikel Jurnal
Optimization of film structure for wide angle incident light for hybridization of photovoltaic and solar thermal power generation
By appropriately determining each layer's refractive index and film thickness, optical multilayer films can control the light spectrum using the interference effect of light. Combining solar and thermal power generation is possible using a heliostat with an optical multi-layer film attached to a…
-
Artikel Jurnal
Design support for product architecture considering supply chain (Evaluation model based on delivery capacity every transportation means)
This study proposes a method to support product architecture design considering the supply chain. Previous studies on product architecture design include methods to realize modularization and product family design based on the relationships among components. From the supply chain perspective…
-
Artikel Jurnal
Effects of cables tension on characteristics of a gymnastics horizontal bar apparatus
In gymnastics, there is a problem in which Japanese athletes who perform well in Japan are unable to perform as well as they would like in practice or competitions overseas. The manufacturer of an apparatus used varies depending on competitions, and the feel of an apparatus may differ from the…
Menampilkan maksimal 50 halaman. Persempit pencarian dengan filter untuk hasil yang lebih spesifik.